diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/clk/renesas/Kconfig | 15 | ||||
-rw-r--r-- | drivers/clk/renesas/Makefile | 3 | ||||
-rw-r--r-- | drivers/clk/renesas/r9a06g032-clocks.c | 1103 | ||||
-rw-r--r-- | drivers/mtd/cfi_flash.c | 10 | ||||
-rw-r--r-- | drivers/pinctrl/Makefile | 1 | ||||
-rw-r--r-- | drivers/pinctrl/renesas/Kconfig | 7 | ||||
-rw-r--r-- | drivers/pinctrl/renesas/Makefile | 1 | ||||
-rw-r--r-- | drivers/pinctrl/renesas/pinctrl-rzn1.c | 379 | ||||
-rw-r--r-- | drivers/ram/Kconfig | 1 | ||||
-rw-r--r-- | drivers/ram/Makefile | 3 | ||||
-rw-r--r-- | drivers/ram/cadence/Kconfig | 12 | ||||
-rw-r--r-- | drivers/ram/cadence/Makefile | 1 | ||||
-rw-r--r-- | drivers/ram/cadence/ddr_ctrl.c | 414 | ||||
-rw-r--r-- | drivers/ram/renesas/Makefile | 3 | ||||
-rw-r--r-- | drivers/ram/renesas/rzn1/Makefile | 3 | ||||
-rw-r--r-- | drivers/ram/renesas/rzn1/ddr_async.c | 376 |
16 files changed, 2329 insertions, 3 deletions
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index 45671c6925..437a82cd48 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -2,7 +2,12 @@ config CLK_RENESAS bool "Renesas clock drivers" depends on CLK && ARCH_RMOBILE help - Enable support for clock present on Renesas RCar SoCs. + Enable support for clock present on Renesas SoCs. + +config CLK_RCAR + bool "Renesas RCar clock driver support" + help + Enable common code for clocks on Renesas RCar SoCs. config CLK_RCAR_CPG_LIB bool "CPG/MSSR library functions" @@ -11,6 +16,7 @@ config CLK_RCAR_GEN2 bool "Renesas RCar Gen2 clock driver" def_bool y if RCAR_32 depends on CLK_RENESAS + select CLK_RCAR help Enable this to support the clocks on Renesas RCar Gen2 SoC. @@ -48,6 +54,7 @@ config CLK_RCAR_GEN3 bool "Renesas RCar Gen3 and Gen4 clock driver" def_bool y if RCAR_64 depends on CLK_RENESAS + select CLK_RCAR select CLK_RCAR_CPG_LIB select DM_RESET help @@ -143,3 +150,9 @@ config CLK_R8A779G0 depends on CLK_RCAR_GEN3 help Enable this to support the clocks on Renesas R8A779G0 SoC. + +config CLK_R9A06G032 + bool "Renesas R9A06G032 clock driver" + depends on CLK_RENESAS + help + Enable this to support the clocks on Renesas R9A06G032 SoC. diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile index fe0391e520..48373e61b9 100644 --- a/drivers/clk/renesas/Makefile +++ b/drivers/clk/renesas/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_CLK_RENESAS) += renesas-cpg-mssr.o +obj-$(CONFIG_CLK_RCAR) += renesas-cpg-mssr.o obj-$(CONFIG_CLK_RCAR_CPG_LIB) += rcar-cpg-lib.o obj-$(CONFIG_CLK_RCAR_GEN2) += clk-rcar-gen2.o obj-$(CONFIG_CLK_R8A774A1) += r8a774a1-cpg-mssr.o @@ -22,3 +22,4 @@ obj-$(CONFIG_CLK_R8A77995) += r8a77995-cpg-mssr.o obj-$(CONFIG_CLK_R8A779A0) += r8a779a0-cpg-mssr.o obj-$(CONFIG_CLK_R8A779F0) += r8a779f0-cpg-mssr.o obj-$(CONFIG_CLK_R8A779G0) += r8a779g0-cpg-mssr.o +obj-$(CONFIG_CLK_R9A06G032) += r9a06g032-clocks.o diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c new file mode 100644 index 0000000000..d2f61236fe --- /dev/null +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -0,0 +1,1103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * R9A06G032 clock driver + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <regmap.h> +#include <syscon.h> +#include <linux/bitops.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <asm/io.h> + +#include <dt-bindings/clock/r9a06g032-sysctrl.h> + +/** + * struct regbit - describe one bit in a register + * @reg: offset of register relative to base address, + * expressed in units of 32-bit words (not bytes), + * @bit: which bit (0 to 31) in the register + * + * This structure is used to compactly encode the location + * of a single bit in a register. Five bits are needed to + * encode the bit number. With uint16_t data type, this + * leaves 11 bits to encode a register offset up to 2047. + * + * Since registers are aligned on 32-bit boundaries, the + * offset will be specified in 32-bit words rather than bytes. + * This allows encoding an offset up to 0x1FFC (8188) bytes. + * + * Helper macro RB() takes care of converting the register + * offset from bytes to 32-bit words. + */ +struct regbit { + u16 reg:11; + u16 bit:5; +}; + +#define RB(_reg, _bit) ((struct regbit) { \ + .reg = (_reg) / 4, \ + .bit = (_bit) \ +}) + +/** + * struct r9a06g032_gate - clock-related control bits + * @gate: clock enable/disable + * @reset: clock module reset (active low) + * @ready: enables NoC forwarding of read/write requests to device, + * (eg. device is ready to handle read/write requests) + * @midle: request to idle the NoC interconnect + * + * Each of these fields describes a single bit in a register, + * which controls some aspect of clock gating. The @gate field + * is mandatory, this one enables/disables the clock. The + * other fields are optional, with zero indicating "not used". + * + * In most cases there is a @reset bit which needs to be + * de-asserted to bring the module out of reset. + * + * Modules may also need to signal when the are @ready to + * handle requests (read/writes) from the NoC interconnect. + * + * Similarly, the @midle bit is used to idle the master. + */ +struct r9a06g032_gate { + struct regbit gate, reset, ready, midle; + /* Unused fields omitted to save space */ + /* struct regbit scon, mirack, mistat */; +}; + +enum gate_type { + K_GATE = 0, /* gate which enable/disable */ + K_FFC, /* fixed factor clock */ + K_DIV, /* divisor */ + K_BITSEL, /* special for UARTs */ + K_DUALGATE /* special for UARTs */ +}; + +/** + * struct r9a06g032_clkdesc - describe a single clock + * @name: string describing this clock + * @managed: boolean indicating if this clock should be + * started/stopped as part of power management + * (not used in u-boot) + * @type: see enum @gate_type + * @index: the ID of this clock element + * @source: the ID+1 of the parent clock element. + * Root clock uses ID of ~0 (PARENT_ID); + * @gate: clock enable/disable + * @div_min: smallest permitted clock divider + * @div_max: largest permitted clock divider + * @reg: clock divider register offset, in 32-bit words + * @div_table: optional list of fixed clock divider values; + * must be in ascending order, zero for unused + * @div: divisor for fixed-factor clock + * @mul: multiplier for fixed-factor clock + * @group: UART group, 0=UART0/1/2, 1=UART3/4/5/6/7 + * @sel: select either g1/r1 or g2/r2 as clock source + * @g1: 1st source gate (clock enable/disable) + * @r1: 1st source reset (module reset) + * @g2: 2nd source gate (clock enable/disable) + * @r2: 2nd source reset (module reset) + * + * Describes a single element in the clock tree hierarchy. + * As there are quite a large number of clock elements, this + * structure is packed tightly to conserve space. + */ +struct r9a06g032_clkdesc { + const char *name; + uint32_t managed:1; + enum gate_type type:3; + uint32_t index:8; + uint32_t source:8; /* source index + 1 (0 == none) */ + union { + /* type = K_GATE */ + struct r9a06g032_gate gate; + /* type = K_DIV */ + struct { + unsigned int div_min:10, div_max:10, reg:10; + u16 div_table[4]; + }; + /* type = K_FFC */ + struct { + u16 div, mul; + }; + /* type = K_DUALGATE */ + struct { + uint16_t group:1; + struct regbit sel, g1, r1, g2, r2; + } dual; + }; +}; + +/* + * The last three arguments are not currently used, + * but are kept in the r9a06g032_clocks table below. + */ +#define I_GATE(_clk, _rst, _rdy, _midle, _scon, _mirack, _mistat) { \ + .gate = _clk, \ + .reset = _rst, \ + .ready = _rdy, \ + .midle = _midle, \ + /* .scon = _scon, */ \ + /* .mirack = _mirack, */ \ + /* .mistat = _mistat */ \ +} +#define D_GATE(_idx, _n, _src, ...) { \ + .type = K_GATE, \ + .index = R9A06G032_##_idx, \ + .source = 1 + R9A06G032_##_src, \ + .name = _n, \ + .gate = I_GATE(__VA_ARGS__) \ +} +#define D_MODULE(_idx, _n, _src, ...) { \ + .type = K_GATE, \ + .index = R9A06G032_##_idx, \ + .source = 1 + R9A06G032_##_src, \ + .name = _n, \ + .managed = 1, \ + .gate = I_GATE(__VA_ARGS__) \ +} +#define D_ROOT(_idx, _n, _mul, _div) { \ + .type = K_FFC, \ + .index = R9A06G032_##_idx, \ + .name = _n, \ + .div = _div, \ + .mul = _mul \ +} +#define D_FFC(_idx, _n, _src, _div) { \ + .type = K_FFC, \ + .index = R9A06G032_##_idx, \ + .source = 1 + R9A06G032_##_src, \ + .name = _n, \ + .div = _div, \ + .mul = 1 \ +} +#define D_DIV(_idx, _n, _src, _reg, _min, _max, ...) { \ + .type = K_DIV, \ + .index = R9A06G032_##_idx, \ + .source = 1 + R9A06G032_##_src, \ + .name = _n, \ + .reg = _reg, \ + .div_min = _min, \ + .div_max = _max, \ + .div_table = { __VA_ARGS__ } \ +} +#define D_UGATE(_idx, _n, _src, _g, _g1, _r1, _g2, _r2) { \ + .type = K_DUALGATE, \ + .index = R9A06G032_##_idx, \ + .source = 1 + R9A06G032_##_src, \ + .name = _n, \ + .dual = { \ + .group = _g, \ + .g1 = _g1, \ + .r1 = _r1, \ + .g2 = _g2, \ + .r2 = _r2 \ + }, \ +} + +/* Internal clock IDs */ +#define R9A06G032_CLKOUT 0 +#define R9A06G032_CLKOUT_D10 2 +#define R9A06G032_CLKOUT_D16 3 +#define R9A06G032_CLKOUT_D160 4 +#define R9A06G032_CLKOUT_D1OR2 5 +#define R9A06G032_CLKOUT_D20 6 +#define R9A06G032_CLKOUT_D40 7 +#define R9A06G032_CLKOUT_D5 8 +#define R9A06G032_CLKOUT_D8 9 +#define R9A06G032_DIV_ADC 10 +#define R9A06G032_DIV_I2C 11 +#define R9A06G032_DIV_NAND 12 +#define R9A06G032_DIV_P1_PG 13 +#define R9A06G032_DIV_P2_PG 14 +#define R9A06G032_DIV_P3_PG 15 +#define R9A06G032_DIV_P4_PG 16 +#define R9A06G032_DIV_P5_PG 17 +#define R9A06G032_DIV_P6_PG 18 +#define R9A06G032_DIV_QSPI0 19 +#define R9A06G032_DIV_QSPI1 20 +#define R9A06G032_DIV_REF_SYNC 21 +#define R9A06G032_DIV_SDIO0 22 +#define R9A06G032_DIV_SDIO1 23 +#define R9A06G032_DIV_SWITCH 24 +#define R9A06G032_DIV_UART 25 +#define R9A06G032_DIV_MOTOR 64 +#define R9A06G032_CLK_DDRPHY_PLLCLK_D4 78 +#define R9A06G032_CLK_ECAT100_D4 79 +#define R9A06G032_CLK_HSR100_D2 80 +#define R9A06G032_CLK_REF_SYNC_D4 81 +#define R9A06G032_CLK_REF_SYNC_D8 82 +#define R9A06G032_CLK_SERCOS100_D2 83 +#define R9A06G032_DIV_CA7 84 + +#define R9A06G032_UART_GROUP_012 154 +#define R9A06G032_UART_GROUP_34567 155 + +#define R9A06G032_CLOCK_COUNT (R9A06G032_UART_GROUP_34567 + 1) + +static const struct r9a06g032_clkdesc r9a06g032_clocks[] = { + D_ROOT(CLKOUT, "clkout", 25, 1), + D_ROOT(CLK_PLL_USB, "clk_pll_usb", 12, 10), + D_FFC(CLKOUT_D10, "clkout_d10", CLKOUT, 10), + D_FFC(CLKOUT_D16, "clkout_d16", CLKOUT, 16), + D_FFC(CLKOUT_D160, "clkout_d160", CLKOUT, 160), + D_DIV(CLKOUT_D1OR2, "clkout_d1or2", CLKOUT, 0, 1, 2), + D_FFC(CLKOUT_D20, "clkout_d20", CLKOUT, 20), + D_FFC(CLKOUT_D40, "clkout_d40", CLKOUT, 40), + D_FFC(CLKOUT_D5, "clkout_d5", CLKOUT, 5), + D_FFC(CLKOUT_D8, "clkout_d8", CLKOUT, 8), + D_DIV(DIV_ADC, "div_adc", CLKOUT, 77, 50, 250), + D_DIV(DIV_I2C, "div_i2c", CLKOUT, 78, 12, 16), + D_DIV(DIV_NAND, "div_nand", CLKOUT, 82, 12, 32), + D_DIV(DIV_P1_PG, "div_p1_pg", CLKOUT, 68, 12, 200), + D_DIV(DIV_P2_PG, "div_p2_pg", CLKOUT, 62, 12, 128), + D_DIV(DIV_P3_PG, "div_p3_pg", CLKOUT, 64, 8, 128), + D_DIV(DIV_P4_PG, "div_p4_pg", CLKOUT, 66, 8, 128), + D_DIV(DIV_P5_PG, "div_p5_pg", CLKOUT, 71, 10, 40), + D_DIV(DIV_P6_PG, "div_p6_pg", CLKOUT, 18, 12, 64), + D_DIV(DIV_QSPI0, "div_qspi0", CLKOUT, 73, 3, 7), + D_DIV(DIV_QSPI1, "div_qspi1", CLKOUT, 25, 3, 7), + D_DIV(DIV_REF_SYNC, "div_ref_sync", CLKOUT, 56, 2, 16, 2, 4, 8, 16), + D_DIV(DIV_SDIO0, "div_sdio0", CLKOUT, 74, 20, 128), + D_DIV(DIV_SDIO1, "div_sdio1", CLKOUT, 75, 20, 128), + D_DIV(DIV_SWITCH, "div_switch", CLKOUT, 37, 5, 40), + D_DIV(DIV_UART, "div_uart", CLKOUT, 79, 12, 128), + D_GATE(CLK_25_PG4, "clk_25_pg4", CLKOUT_D40, RB(0xe8, 9), + RB(0xe8, 10), RB(0xe8, 11), RB(0x00, 0), + RB(0x15c, 3), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_25_PG5, "clk_25_pg5", CLKOUT_D40, RB(0xe8, 12), + RB(0xe8, 13), RB(0xe8, 14), RB(0x00, 0), + RB(0x15c, 4), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_25_PG6, "clk_25_pg6", CLKOUT_D40, RB(0xe8, 15), + RB(0xe8, 16), RB(0xe8, 17), RB(0x00, 0), + RB(0x15c, 5), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_25_PG7, "clk_25_pg7", CLKOUT_D40, RB(0xe8, 18), + RB(0xe8, 19), RB(0xe8, 20), RB(0x00, 0), + RB(0x15c, 6), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_25_PG8, "clk_25_pg8", CLKOUT_D40, RB(0xe8, 21), + RB(0xe8, 22), RB(0xe8, 23), RB(0x00, 0), + RB(0x15c, 7), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_ADC, "clk_adc", DIV_ADC, RB(0x3c, 10), + RB(0x3c, 11), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_ECAT100, "clk_ecat100", CLKOUT_D10, RB(0x80, 5), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_HSR100, "clk_hsr100", CLKOUT_D10, RB(0x90, 3), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_I2C0, "clk_i2c0", DIV_I2C, RB(0x3c, 6), + RB(0x3c, 7), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_I2C1, "clk_i2c1", DIV_I2C, RB(0x3c, 8), + RB(0x3c, 9), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_MII_REF, "clk_mii_ref", CLKOUT_D40, RB(0x68, 2), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_NAND, "clk_nand", DIV_NAND, RB(0x50, 4), + RB(0x50, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_NOUSBP2_PG6, "clk_nousbp2_pg6", DIV_P2_PG, RB(0xec, 20), + RB(0xec, 21), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P1_PG2, "clk_p1_pg2", DIV_P1_PG, RB(0x10c, 2), + RB(0x10c, 3), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P1_PG3, "clk_p1_pg3", DIV_P1_PG, RB(0x10c, 4), + RB(0x10c, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P1_PG4, "clk_p1_pg4", DIV_P1_PG, RB(0x10c, 6), + RB(0x10c, 7), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P4_PG3, "clk_p4_pg3", DIV_P4_PG, RB(0x104, 4), + RB(0x104, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P4_PG4, "clk_p4_pg4", DIV_P4_PG, RB(0x104, 6), + RB(0x104, 7), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P6_PG1, "clk_p6_pg1", DIV_P6_PG, RB(0x114, 0), + RB(0x114, 1), RB(0x114, 2), RB(0x00, 0), + RB(0x16c, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P6_PG2, "clk_p6_pg2", DIV_P6_PG, RB(0x114, 3), + RB(0x114, 4), RB(0x114, 5), RB(0x00, 0), + RB(0x16c, 1), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P6_PG3, "clk_p6_pg3", DIV_P6_PG, RB(0x114, 6), + RB(0x114, 7), RB(0x114, 8), RB(0x00, 0), + RB(0x16c, 2), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_P6_PG4, "clk_p6_pg4", DIV_P6_PG, RB(0x114, 9), + RB(0x114, 10), RB(0x114, 11), RB(0x00, 0), + RB(0x16c, 3), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(CLK_PCI_USB, "clk_pci_usb", CLKOUT_D40, RB(0x1c, 6), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_QSPI0, "clk_qspi0", DIV_QSPI0, RB(0x54, 4), + RB(0x54, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_QSPI1, "clk_qspi1", DIV_QSPI1, RB(0x90, 4), + RB(0x90, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_RGMII_REF, "clk_rgmii_ref", CLKOUT_D8, RB(0x68, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_RMII_REF, "clk_rmii_ref", CLKOUT_D20, RB(0x68, 1), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SDIO0, "clk_sdio0", DIV_SDIO0, RB(0x0c, 4), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SDIO1, "clk_sdio1", DIV_SDIO1, RB(0xc8, 4), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SERCOS100, "clk_sercos100", CLKOUT_D10, RB(0x84, 5), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SLCD, "clk_slcd", DIV_P1_PG, RB(0x10c, 0), + RB(0x10c, 1), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SPI0, "clk_spi0", DIV_P3_PG, RB(0xfc, 0), + RB(0xfc, 1), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SPI1, "clk_spi1", DIV_P3_PG, RB(0xfc, 2), + RB(0xfc, 3), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SPI2, "clk_spi2", DIV_P3_PG, RB(0xfc, 4), + RB(0xfc, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SPI3, "clk_spi3", DIV_P3_PG, RB(0xfc, 6), + RB(0xfc, 7), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SPI4, "clk_spi4", DIV_P4_PG, RB(0x104, 0), + RB(0x104, 1), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SPI5, "clk_spi5", DIV_P4_PG, RB(0x104, 2), + RB(0x104, 3), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SWITCH, "clk_switch", DIV_SWITCH, RB(0x130, 2), + RB(0x130, 3), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_DIV(DIV_MOTOR, "div_motor", CLKOUT_D5, 84, 2, 8), + D_MODULE(HCLK_ECAT125, "hclk_ecat125", CLKOUT_D8, RB(0x80, 0), + RB(0x80, 1), RB(0x00, 0), RB(0x80, 2), + RB(0x00, 0), RB(0x88, 0), RB(0x88, 1)), + D_MODULE(HCLK_PINCONFIG, "hclk_pinconfig", CLKOUT_D40, RB(0xe8, 0), + RB(0xe8, 1), RB(0xe8, 2), RB(0x00, 0), + RB(0x15c, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SERCOS, "hclk_sercos", CLKOUT_D10, RB(0x84, 0), + RB(0x84, 2), RB(0x00, 0), RB(0x84, 1), + RB(0x00, 0), RB(0x8c, 0), RB(0x8c, 1)), + D_MODULE(HCLK_SGPIO2, "hclk_sgpio2", DIV_P5_PG, RB(0x118, 3), + RB(0x118, 4), RB(0x118, 5), RB(0x00, 0), + RB(0x168, 1), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SGPIO3, "hclk_sgpio3", DIV_P5_PG, RB(0x118, 6), + RB(0x118, 7), RB(0x118, 8), RB(0x00, 0), + RB(0x168, 2), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SGPIO4, "hclk_sgpio4", DIV_P5_PG, RB(0x118, 9), + RB(0x118, 10), RB(0x118, 11), RB(0x00, 0), + RB(0x168, 3), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_TIMER0, "hclk_timer0", CLKOUT_D40, RB(0xe8, 3), + RB(0xe8, 4), RB(0xe8, 5), RB(0x00, 0), + RB(0x15c, 1), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_TIMER1, "hclk_timer1", CLKOUT_D40, RB(0xe8, 6), + RB(0xe8, 7), RB(0xe8, 8), RB(0x00, 0), + RB(0x15c, 2), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_USBF, "hclk_usbf", CLKOUT_D8, RB(0x1c, 3), + RB(0x00, 0), RB(0x00, 0), RB(0x1c, 4), + RB(0x00, 0), RB(0x20, 2), RB(0x20, 3)), + D_MODULE(HCLK_USBH, "hclk_usbh", CLKOUT_D8, RB(0x1c, 0), + RB(0x1c, 1), RB(0x00, 0), RB(0x1c, 2), + RB(0x00, 0), RB(0x20, 0), RB(0x20, 1)), + D_MODULE(HCLK_USBPM, "hclk_usbpm", CLKOUT_D8, RB(0x1c, 5), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_48_PG_F, "clk_48_pg_f", CLK_48, RB(0xf0, 12), + RB(0xf0, 13), RB(0x00, 0), RB(0xf0, 14), + RB(0x00, 0), RB(0x160, 4), RB(0x160, 5)), + D_GATE(CLK_48_PG4, "clk_48_pg4", CLK_48, RB(0xf0, 9), + RB(0xf0, 10), RB(0xf0, 11), RB(0x00, 0), + RB(0x160, 3), RB(0x00, 0), RB(0x00, 0)), + D_FFC(CLK_DDRPHY_PLLCLK_D4, "clk_ddrphy_pllclk_d4", CLK_DDRPHY_PLLCLK, 4), + D_FFC(CLK_ECAT100_D4, "clk_ecat100_d4", CLK_ECAT100, 4), + D_FFC(CLK_HSR100_D2, "clk_hsr100_d2", CLK_HSR100, 2), + D_FFC(CLK_REF_SYNC_D4, "clk_ref_sync_d4", CLK_REF_SYNC, 4), + D_FFC(CLK_REF_SYNC_D8, "clk_ref_sync_d8", CLK_REF_SYNC, 8), + D_FFC(CLK_SERCOS100_D2, "clk_sercos100_d2", CLK_SERCOS100, 2), + D_DIV(DIV_CA7, "div_ca7", CLK_REF_SYNC, 57, 1, 4, 1, 2, 4), + D_MODULE(HCLK_CAN0, "hclk_can0", CLK_48, RB(0xf0, 3), + RB(0xf0, 4), RB(0xf0, 5), RB(0x00, 0), + RB(0x160, 1), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_CAN1, "hclk_can1", CLK_48, RB(0xf0, 6), + RB(0xf0, 7), RB(0xf0, 8), RB(0x00, 0), + RB(0x160, 2), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_DELTASIGMA, "hclk_deltasigma", DIV_MOTOR, RB(0x3c, 15), + RB(0x3c, 16), RB(0x3c, 17), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_PWMPTO, "hclk_pwmpto", DIV_MOTOR, RB(0x3c, 12), + RB(0x3c, 13), RB(0x3c, 14), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_RSV, "hclk_rsv", CLK_48, RB(0xf0, 0), + RB(0xf0, 1), RB(0xf0, 2), RB(0x00, 0), + RB(0x160, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SGPIO0, "hclk_sgpio0", DIV_MOTOR, RB(0x3c, 0), + RB(0x3c, 1), RB(0x3c, 2), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SGPIO1, "hclk_sgpio1", DIV_MOTOR, RB(0x3c, 3), + RB(0x3c, 4), RB(0x3c, 5), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_DIV(RTOS_MDC, "rtos_mdc", CLK_REF_SYNC, 100, 80, 640, 80, 160, 320, 640), + D_GATE(CLK_CM3, "clk_cm3", CLK_REF_SYNC_D4, RB(0x174, 0), + RB(0x174, 1), RB(0x00, 0), RB(0x174, 2), + RB(0x00, 0), RB(0x178, 0), RB(0x178, 1)), + D_GATE(CLK_DDRC, "clk_ddrc", CLK_DDRPHY_PLLCLK_D4, RB(0x64, 3), + RB(0x64, 4), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_ECAT25, "clk_ecat25", CLK_ECAT100_D4, RB(0x80, 3), + RB(0x80, 4), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_HSR50, "clk_hsr50", CLK_HSR100_D2, RB(0x90, 4), + RB(0x90, 5), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_HW_RTOS, "clk_hw_rtos", CLK_REF_SYNC_D4, RB(0x18c, 0), + RB(0x18c, 1), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_GATE(CLK_SERCOS50, "clk_sercos50", CLK_SERCOS100_D2, RB(0x84, 4), + RB(0x84, 3), RB(0x00, 0), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_ADC, "hclk_adc", CLK_REF_SYNC_D8, RB(0x34, 15), + RB(0x34, 16), RB(0x34, 17), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_CM3, "hclk_cm3", CLK_REF_SYNC_D4, RB(0x184, 0), + RB(0x184, 1), RB(0x184, 2), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_CRYPTO_EIP150, "hclk_crypto_eip150", CLK_REF_SYNC_D4, RB(0x24, 3), + RB(0x24, 4), RB(0x24, 5), RB(0x00, 0), + RB(0x28, 2), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_CRYPTO_EIP93, "hclk_crypto_eip93", CLK_REF_SYNC_D4, RB(0x24, 0), + RB(0x24, 1), RB(0x00, 0), RB(0x24, 2), + RB(0x00, 0), RB(0x28, 0), RB(0x28, 1)), + D_MODULE(HCLK_DDRC, "hclk_ddrc", CLK_REF_SYNC_D4, RB(0x64, 0), + RB(0x64, 2), RB(0x00, 0), RB(0x64, 1), + RB(0x00, 0), RB(0x74, 0), RB(0x74, 1)), + D_MODULE(HCLK_DMA0, "hclk_dma0", CLK_REF_SYNC_D4, RB(0x4c, 0), + RB(0x4c, 1), RB(0x4c, 2), RB(0x4c, 3), + RB(0x58, 0), RB(0x58, 1), RB(0x58, 2)), + D_MODULE(HCLK_DMA1, "hclk_dma1", CLK_REF_SYNC_D4, RB(0x4c, 4), + RB(0x4c, 5), RB(0x4c, 6), RB(0x4c, 7), + RB(0x58, 3), RB(0x58, 4), RB(0x58, 5)), + D_MODULE(HCLK_GMAC0, "hclk_gmac0", CLK_REF_SYNC_D4, RB(0x6c, 0), + RB(0x6c, 1), RB(0x6c, 2), RB(0x6c, 3), + RB(0x78, 0), RB(0x78, 1), RB(0x78, 2)), + D_MODULE(HCLK_GMAC1, "hclk_gmac1", CLK_REF_SYNC_D4, RB(0x70, 0), + RB(0x70, 1), RB(0x70, 2), RB(0x70, 3), + RB(0x7c, 0), RB(0x7c, 1), RB(0x7c, 2)), + D_MODULE(HCLK_GPIO0, "hclk_gpio0", CLK_REF_SYNC_D4, RB(0x40, 18), + RB(0x40, 19), RB(0x40, 20), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_GPIO1, "hclk_gpio1", CLK_REF_SYNC_D4, RB(0x40, 21), + RB(0x40, 22), RB(0x40, 23), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_GPIO2, "hclk_gpio2", CLK_REF_SYNC_D4, RB(0x44, 9), + RB(0x44, 10), RB(0x44, 11), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_HSR, "hclk_hsr", CLK_HSR100_D2, RB(0x90, 0), + RB(0x90, 2), RB(0x00, 0), RB(0x90, 1), + RB(0x00, 0), RB(0x98, 0), RB(0x98, 1)), + D_MODULE(HCLK_I2C0, "hclk_i2c0", CLK_REF_SYNC_D8, RB(0x34, 9), + RB(0x34, 10), RB(0x34, 11), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_I2C1, "hclk_i2c1", CLK_REF_SYNC_D8, RB(0x34, 12), + RB(0x34, 13), RB(0x34, 14), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_LCD, "hclk_lcd", CLK_REF_SYNC_D4, RB(0xf4, 0), + RB(0xf4, 1), RB(0xf4, 2), RB(0x00, 0), + RB(0x164, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_MSEBI_M, "hclk_msebi_m", CLK_REF_SYNC_D4, RB(0x2c, 4), + RB(0x2c, 5), RB(0x2c, 6), RB(0x00, 0), + RB(0x30, 3), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_MSEBI_S, "hclk_msebi_s", CLK_REF_SYNC_D4, RB(0x2c, 0), + RB(0x2c, 1), RB(0x2c, 2), RB(0x2c, 3), + RB(0x30, 0), RB(0x30, 1), RB(0x30, 2)), + D_MODULE(HCLK_NAND, "hclk_nand", CLK_REF_SYNC_D4, RB(0x50, 0), + RB(0x50, 1), RB(0x50, 2), RB(0x50, 3), + RB(0x5c, 0), RB(0x5c, 1), RB(0x5c, 2)), + D_MODULE(HCLK_PG_I, "hclk_pg_i", CLK_REF_SYNC_D4, RB(0xf4, 12), + RB(0xf4, 13), RB(0x00, 0), RB(0xf4, 14), + RB(0x00, 0), RB(0x164, 4), RB(0x164, 5)), + D_MODULE(HCLK_PG19, "hclk_pg19", CLK_REF_SYNC_D4, RB(0x44, 12), + RB(0x44, 13), RB(0x44, 14), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_PG20, "hclk_pg20", CLK_REF_SYNC_D4, RB(0x44, 15), + RB(0x44, 16), RB(0x44, 17), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_PG3, "hclk_pg3", CLK_REF_SYNC_D4, RB(0xf4, 6), + RB(0xf4, 7), RB(0xf4, 8), RB(0x00, 0), + RB(0x164, 2), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_PG4, "hclk_pg4", CLK_REF_SYNC_D4, RB(0xf4, 9), + RB(0xf4, 10), RB(0xf4, 11), RB(0x00, 0), + RB(0x164, 3), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_QSPI0, "hclk_qspi0", CLK_REF_SYNC_D4, RB(0x54, 0), + RB(0x54, 1), RB(0x54, 2), RB(0x54, 3), + RB(0x60, 0), RB(0x60, 1), RB(0x60, 2)), + D_MODULE(HCLK_QSPI1, "hclk_qspi1", CLK_REF_SYNC_D4, RB(0x90, 0), + RB(0x90, 1), RB(0x90, 2), RB(0x90, 3), + RB(0x98, 0), RB(0x98, 1), RB(0x98, 2)), + D_MODULE(HCLK_ROM, "hclk_rom", CLK_REF_SYNC_D4, RB(0x154, 0), + RB(0x154, 1), RB(0x154, 2), RB(0x00, 0), + RB(0x170, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_RTC, "hclk_rtc", CLK_REF_SYNC_D8, RB(0x140, 0), + RB(0x140, 3), RB(0x00, 0), RB(0x140, 2), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SDIO0, "hclk_sdio0", CLK_REF_SYNC_D4, RB(0x0c, 0), + RB(0x0c, 1), RB(0x0c, 2), RB(0x0c, 3), + RB(0x10, 0), RB(0x10, 1), RB(0x10, 2)), + D_MODULE(HCLK_SDIO1, "hclk_sdio1", CLK_REF_SYNC_D4, RB(0xc8, 0), + RB(0xc8, 1), RB(0xc8, 2), RB(0xc8, 3), + RB(0xcc, 0), RB(0xcc, 1), RB(0xcc, 2)), + D_MODULE(HCLK_SEMAP, "hclk_semap", CLK_REF_SYNC_D4, RB(0xf4, 3), + RB(0xf4, 4), RB(0xf4, 5), RB(0x00, 0), + RB(0x164, 1), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SPI0, "hclk_spi0", CLK_REF_SYNC_D4, RB(0x40, 0), + RB(0x40, 1), RB(0x40, 2), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SPI1, "hclk_spi1", CLK_REF_SYNC_D4, RB(0x40, 3), + RB(0x40, 4), RB(0x40, 5), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SPI2, "hclk_spi2", CLK_REF_SYNC_D4, RB(0x40, 6), + RB(0x40, 7), RB(0x40, 8), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SPI3, "hclk_spi3", CLK_REF_SYNC_D4, RB(0x40, 9), + RB(0x40, 10), RB(0x40, 11), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SPI4, "hclk_spi4", CLK_REF_SYNC_D4, RB(0x40, 12), + RB(0x40, 13), RB(0x40, 14), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SPI5, "hclk_spi5", CLK_REF_SYNC_D4, RB(0x40, 15), + RB(0x40, 16), RB(0x40, 17), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SWITCH, "hclk_switch", CLK_REF_SYNC_D4, RB(0x130, 0), + RB(0x00, 0), RB(0x130, 1), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_SWITCH_RG, "hclk_switch_rg", CLK_REF_SYNC_D4, RB(0x188, 0), + RB(0x188, 1), RB(0x188, 2), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART0, "hclk_uart0", CLK_REF_SYNC_D8, RB(0x34, 0), + RB(0x34, 1), RB(0x34, 2), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART1, "hclk_uart1", CLK_REF_SYNC_D8, RB(0x34, 3), + RB(0x34, 4), RB(0x34, 5), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART2, "hclk_uart2", CLK_REF_SYNC_D8, RB(0x34, 6), + RB(0x34, 7), RB(0x34, 8), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART3, "hclk_uart3", CLK_REF_SYNC_D4, RB(0x40, 24), + RB(0x40, 25), RB(0x40, 26), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART4, "hclk_uart4", CLK_REF_SYNC_D4, RB(0x40, 27), + RB(0x40, 28), RB(0x40, 29), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART5, "hclk_uart5", CLK_REF_SYNC_D4, RB(0x44, 0), + RB(0x44, 1), RB(0x44, 2), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART6, "hclk_uart6", CLK_REF_SYNC_D4, RB(0x44, 3), + RB(0x44, 4), RB(0x44, 5), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + D_MODULE(HCLK_UART7, "hclk_uart7", CLK_REF_SYNC_D4, RB(0x44, 6), + RB(0x44, 7), RB(0x44, 8), RB(0x00, 0), + RB(0x00, 0), RB(0x00, 0), RB(0x00, 0)), + /* + * These are not hardware clocks, but are needed to handle the special + * case where we have a 'selector bit' that doesn't just change the + * parent for a clock, but also the gate it's supposed to use. + */ + { + .index = R9A06G032_UART_GROUP_012, + .name = "uart_group_012", + .type = K_BITSEL, + .source = 1 + R9A06G032_DIV_UART, + /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */ + .dual.sel = RB(0x34, 30), + .dual.group = 0, + }, + { + .index = R9A06G032_UART_GROUP_34567, + .name = "uart_group_34567", + .type = K_BITSEL, + .source = 1 + R9A06G032_DIV_P2_PG, + /* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */ + .dual.sel = RB(0xec, 24), + .dual.group = 1, + }, + D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, + RB(0x34, 18), RB(0x34, 19), RB(0x34, 20), RB(0x34, 21)), + D_UGATE(CLK_UART1, "clk_uart1", UART_GROUP_012, 0, + RB(0x34, 22), RB(0x34, 23), RB(0x34, 24), RB(0x34, 25)), + D_UGATE(CLK_UART2, "clk_uart2", UART_GROUP_012, 0, + RB(0x34, 26), RB(0x34, 27), RB(0x34, 28), RB(0x34, 29)), + D_UGATE(CLK_UART3, "clk_uart3", UART_GROUP_34567, 1, + RB(0xec, 0), RB(0xec, 1), RB(0xec, 2), RB(0xec, 3)), + D_UGATE(CLK_UART4, "clk_uart4", UART_GROUP_34567, 1, + RB(0xec, 4), RB(0xec, 5), RB(0xec, 6), RB(0xec, 7)), + D_UGATE(CLK_UART5, "clk_uart5", UART_GROUP_34567, 1, + RB(0xec, 8), RB(0xec, 9), RB(0xec, 10), RB(0xec, 11)), + D_UGATE(CLK_UART6, "clk_uart6", UART_GROUP_34567, 1, + RB(0xec, 12), RB(0xec, 13), RB(0xec, 14), RB(0xec, 15)), + D_UGATE(CLK_UART7, "clk_uart7", UART_GROUP_34567, 1, + RB(0xec, 16), RB(0xec, 17), RB(0xec, 18), RB(0xec, 19)), +}; + +struct r9a06g032_priv { + struct regmap *regmap; + struct clk mclk; +}; + +static const struct r9a06g032_clkdesc *r9a06g032_clk_get(struct clk *clk) +{ + const unsigned long clkid = clk->id & 0xffff; + int i; + + for (i = 0; i < ARRAY_SIZE(r9a06g032_clocks); i++) { + if (r9a06g032_clocks[i].index == clkid) + return &r9a06g032_clocks[i]; + } + + return NULL; +} + +#define PARENT_ID (~0) + +static int r9a06g032_clk_get_parent(struct clk *clk, struct clk *parent) +{ + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + + if (!desc) + return -ENOENT; + + if (desc->source) + parent->id = desc->source - 1; + else + parent->id = PARENT_ID; /* Top-level clock */ + + parent->dev = clk->dev; + + return 0; +} + +static ulong r9a06g032_clk_get_parent_rate(struct clk *clk) +{ + struct clk parent; + unsigned long parent_rate; + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + + if (r9a06g032_clk_get_parent(clk, &parent)) { + dev_dbg(clk->dev, "Failed to get parent clock for id=%lu\b", clk->id); + return 0; + } + + if (parent.id == PARENT_ID) + parent_rate = clk_get_rate(&clocks->mclk); + else + parent_rate = clk_get_rate(&parent); + + if (!parent_rate) + dev_dbg(clk->dev, "%s: parent_rate is zero\n", __func__); + + return parent_rate; +} + +/* register/bit pairs are encoded as an uint16_t */ +static void clk_rdesc_set(struct r9a06g032_priv *clocks, + struct regbit rb, unsigned int on) +{ + uint reg = rb.reg * 4; + uint bit = rb.bit; + + if (!reg && !bit) + return; + + uint mask = BIT(bit); + uint val = (!!on) << bit; + + regmap_update_bits(clocks->regmap, reg, mask, val); +} + +static int clk_rdesc_get(struct r9a06g032_priv *clocks, + struct regbit rb) +{ + uint reg = rb.reg * 4; + uint bit = rb.bit; + u32 val = 0; + + regmap_read(clocks->regmap, reg, &val); + + return !!(val & BIT(bit)); +} + +/* + * Cheating a little bit here: leverage the existing code to control the + * per-clock reset. It should really be handled by a reset controller instead. + */ +void clk_rzn1_reset_state(struct clk *clk, int on) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + const struct r9a06g032_gate *g; + + assert(desc); + assert(desc->type == K_GATE); + g = &desc->gate; + + clk_rdesc_set(clocks, g->reset, on); +} + +/* + * This implements the R9A06G032 clock gate 'driver'. We cannot use the system's + * clock gate framework as the gates on the R9A06G032 have a special enabling + * sequence, therefore we use this little proxy. + */ +static int r9a06g032_clk_gate_set(struct clk *clk, int on) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + const struct r9a06g032_gate *g; + + assert(desc); + assert(desc->type == K_GATE); + g = &desc->gate; + + /* Enable or disable the clock */ + clk_rdesc_set(clocks, g->gate, on); + + /* De-assert reset */ + clk_rdesc_set(clocks, g->reset, 1); + + /* Hardware manual recommends 5us delay after enabling clock & reset */ + udelay(5); + + /* If the peripheral is memory mapped (i.e. an AXI slave), there is an + * associated SLVRDY bit in the System Controller that needs to be set + * so that the FlexWAY bus fabric passes on the read/write requests. + */ + clk_rdesc_set(clocks, g->ready, on); + + /* Clear 'Master Idle Request' bit */ + clk_rdesc_set(clocks, g->midle, !on); + + /* Note: We don't wait for FlexWAY Socket Connection signal */ + + return 0; +} + +static int r9a06g032_clk_gate_enable(struct clk *clk) +{ + return r9a06g032_clk_gate_set(clk, 1); +} + +static int r9a06g032_clk_gate_disable(struct clk *clk) +{ + return r9a06g032_clk_gate_set(clk, 0); +} + +/* + * Fixed factor clock + */ +static ulong r9a06g032_ffc_get_rate(struct clk *clk) +{ + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + unsigned long parent_rate = r9a06g032_clk_get_parent_rate(clk); + unsigned long long rate; + + rate = (unsigned long long)parent_rate * desc->mul; + rate = DIV_ROUND_UP(rate, desc->div); + + return (ulong)rate; +} + +/* + * This implements R9A06G032 clock divider 'driver'. This differs from the + * standard clk_divider because the set_rate method must also set b[31] to + * trigger the hardware rate change. In theory it should also wait for this + * bit to clear. + */ +static ulong r9a06g032_div_get_rate(struct clk *clk) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + unsigned long parent_rate = r9a06g032_clk_get_parent_rate(clk); + u32 div = 0; + + regmap_read(clocks->regmap, 4 * desc->reg, &div); + + if (div < desc->div_min) + div = desc->div_min; + else if (div > desc->div_max) + div = desc->div_max; + return DIV_ROUND_UP(parent_rate, div); +} + +static ulong r9a06g032_div_set_rate(struct clk *clk, ulong rate) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + unsigned long parent_rate = r9a06g032_clk_get_parent_rate(clk); + size_t i; + + /* + 1 to cope with rates that have the remainder dropped */ + u32 div = DIV_ROUND_UP(parent_rate, rate + 1); + + /* Clamp to allowable range */ + if (div < desc->div_min) + div = desc->div_min; + else if (div > desc->div_max) + div = desc->div_max; + + /* Limit to allowable divisors */ + for (i = 0; i < ARRAY_SIZE(desc->div_table) - 2; i++) { + u16 div_m = desc->div_table[i]; + u16 div_p = desc->div_table[i + 1]; + + if (!div_m || !div_p) + continue; + + if (div >= div_m && div <= div_p) { + /* + * select the divider that generates + * the value closest to ideal frequency + */ + u32 m = rate - DIV_ROUND_UP(parent_rate, div_m); + u32 p = DIV_ROUND_UP(parent_rate, div_p) - rate; + + div = p >= m ? div_m : div_p; + } + } + + dev_dbg(clk->dev, "%s clkid %lu rate %ld parent %ld div %d\n", + __func__, clk->id, rate, parent_rate, div); + + /* + * Need to write the bit 31 with the divider value to + * latch it. Technically we should wait until it has been + * cleared too. + * TODO: Find whether this callback is sleepable, in case + * the hardware /does/ require some sort of spinloop here. + */ + regmap_write(clocks->regmap, 4 * desc->reg, div | BIT(31)); + + return 0; +} + +/* + * Dual gate. This handles toggling the approprate clock/reset bits, + * which depends on the mux setting above. + */ +static int r9a06g032_clk_dualgate_setenable(struct r9a06g032_priv *clocks, + const struct r9a06g032_clkdesc *desc, + int enable) +{ + u8 sel_bit = clk_rdesc_get(clocks, desc->dual.sel); + struct regbit gate[2] = { desc->dual.g1, desc->dual.g2 }; + struct regbit reset[2] = { desc->dual.r1, desc->dual.r2 }; + + /* we always turn off the 'other' gate, regardless */ + clk_rdesc_set(clocks, gate[!sel_bit], 0); + clk_rdesc_set(clocks, reset[!sel_bit], 1); + + /* set the gate as requested */ + clk_rdesc_set(clocks, gate[sel_bit], enable); + clk_rdesc_set(clocks, reset[sel_bit], 1); + + return 0; +} + +static int r9a06g032_clk_dualgate_enable(struct clk *clk) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + + return r9a06g032_clk_dualgate_setenable(clocks, desc, 1); +} + +static int r9a06g032_clk_dualgate_disable(struct clk *clk) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + + return r9a06g032_clk_dualgate_setenable(clocks, desc, 0); +} + +static int r9a06g032_clk_dualgate_is_enabled(struct clk *clk) +{ + struct r9a06g032_priv *clocks = dev_get_priv(clk->dev); + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + u8 sel_bit = clk_rdesc_get(clocks, desc->dual.sel); + struct regbit gate[2] = { desc->dual.g1, desc->dual.g2 }; + + return clk_rdesc_get(clocks, gate[sel_bit]); +} + +/* + * Main clock driver + */ +static int r9a06g032_clk_enable(struct clk *clk) +{ + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + + switch (desc->type) { + case K_GATE: + return r9a06g032_clk_gate_enable(clk); + case K_DUALGATE: + return r9a06g032_clk_dualgate_enable(clk); + default: + dev_dbg(clk->dev, "ERROR: unhandled type=%d\n", desc->type); + break; + } + + return 0; +} + +static int r9a06g032_clk_disable(struct clk *clk) +{ + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + + switch (desc->type) { + case K_GATE: + return r9a06g032_clk_gate_disable(clk); + case K_DUALGATE: + return r9a06g032_clk_dualgate_disable(clk); + default: + dev_dbg(clk->dev, "ERROR: unhandled type=%d\n", desc->type); + break; + } + + return 0; +} + +static ulong r9a06g032_clk_get_rate(struct clk *clk) +{ + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + ulong ret = 0; + + assert(desc); + + switch (desc->type) { + case K_FFC: + ret = r9a06g032_ffc_get_rate(clk); + break; + case K_GATE: + ret = r9a06g032_clk_get_parent_rate(clk); + break; + case K_DIV: + ret = r9a06g032_div_get_rate(clk); + break; + case K_BITSEL: + /* + * Look at the mux to determine parent. + * 0 means it is coming from UART DIV (group 012 or 34567) + * 1 means it is coming from USB_PLL (fixed at 48MHz) + */ + if (r9a06g032_clk_dualgate_is_enabled(clk)) { + struct clk usb_clk = { .id = R9A06G032_CLK_PLL_USB }; + + ret = r9a06g032_clk_get_parent_rate(&usb_clk); + } else { + ret = r9a06g032_clk_get_parent_rate(clk); + } + break; + case K_DUALGATE: + ret = r9a06g032_clk_get_parent_rate(clk); + break; + } + + return ret; +} + +static ulong r9a06g032_clk_set_rate(struct clk *clk, ulong rate) +{ + const struct r9a06g032_clkdesc *desc = r9a06g032_clk_get(clk); + ulong ret = 0; + + assert(desc); + + switch (desc->type) { + case K_DIV: + ret = r9a06g032_div_set_rate(clk, rate); + break; + default: + dev_dbg(clk->dev, "ERROR: not implemented for %d\n", desc->type); + }; + + return ret; +} + +static int r9a06g032_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) +{ + if (args->args_count != 1) { + dev_dbg(clk->dev, "Invalid args_count: %d\n", args->args_count); + return -EINVAL; + } + + clk->id = args->args[0]; + + return 0; +} + +static const struct clk_ops r9a06g032_clk_ops = { + .enable = r9a06g032_clk_enable, + .disable = r9a06g032_clk_disable, + .get_rate = r9a06g032_clk_get_rate, + .set_rate = r9a06g032_clk_set_rate, + .of_xlate = r9a06g032_clk_of_xlate, +}; + +/* Reset Enable Register */ +#define RZN1_SYSCTRL_REG_RSTEN 288 /* 0x120*/ +#define RZN1_SYSCTRL_REG_RSTEN_MRESET_EN BIT(0) +#define RZN1_SYSCTRL_REG_RSTEN_WDA7RST_CA7_0_EN BIT(1) +#define RZN1_SYSCTRL_REG_RSTEN_WDA7RST_CA7_1_EN BIT(2) +#define RZN1_SYSCTRL_REG_RSTEN_WDM3RST_EN BIT(3) +#define RZN1_SYSCTRL_REG_RSTEN_CM3LOCKUPRST_EN BIT(4) +#define RZN1_SYSCTRL_REG_RSTEN_CM3SYSRESET_EN BIT(5) +#define RZN1_SYSCTRL_REG_RSTEN_SWRST_EN BIT(6) + +static int r9a06g032_clk_probe(struct udevice *dev) +{ + struct r9a06g032_priv *priv = dev_get_priv(dev); + + priv->regmap = syscon_regmap_lookup_by_phandle(dev, "regmap"); + if (IS_ERR(priv->regmap)) { + dev_dbg(dev, "unable to find regmap\n"); + return PTR_ERR(priv->regmap); + } + + /* Enable S/W reset */ + regmap_write(priv->regmap, RZN1_SYSCTRL_REG_RSTEN, + RZN1_SYSCTRL_REG_RSTEN_MRESET_EN | + RZN1_SYSCTRL_REG_RSTEN_SWRST_EN); + + /* Get master clock */ + return clk_get_by_name(dev, "mclk", &priv->mclk); +} + +static const struct udevice_id r9a06g032_clk_ids[] = { + { .compatible = "renesas,r9a06g032-sysctrl" }, + { } +}; + +U_BOOT_DRIVER(clk_r9a06g032) = { + .name = "clk_r9a06g032", + .id = UCLASS_CLK, + .of_match = r9a06g032_clk_ids, + .priv_auto = sizeof(struct r9a06g032_priv), + .ops = &r9a06g032_clk_ops, + .probe = &r9a06g032_clk_probe, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f378f6fb61..8ade7949a6 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -2196,6 +2196,12 @@ ulong flash_get_size(phys_addr_t base, int banknum) /* multiply the size by the number of chips */ info->size *= size_ratio; max_size = cfi_flash_bank_size(banknum); +#ifdef CONFIG_CFI_FLASH + if (max_size) + max_size = min((unsigned long)info->addr_size, max_size); + else + max_size = info->addr_size; +#endif if (max_size && info->size > max_size) { debug("[truncated from %ldMiB]", info->size >> 20); info->size = max_size; @@ -2492,15 +2498,17 @@ unsigned long flash_init(void) static int cfi_flash_probe(struct udevice *dev) { fdt_addr_t addr; + fdt_size_t size; int idx; for (idx = 0; idx < CFI_MAX_FLASH_BANKS; idx++) { - addr = dev_read_addr_index(dev, idx); + addr = dev_read_addr_size_index(dev, idx, &size); if (addr == FDT_ADDR_T_NONE) break; flash_info[cfi_flash_num_flash_banks].dev = dev; flash_info[cfi_flash_num_flash_banks].base = addr; + flash_info[cfi_flash_num_flash_banks].addr_size = size; cfi_flash_num_flash_banks++; } gd->bd->bi_flashstart = flash_info[0].base; diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 852adee4b4..fc1f01a02c 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_INTEL) += intel/ obj-$(CONFIG_ARCH_MTMIPS) += mtmips/ obj-$(CONFIG_ARCH_NPCM) += nuvoton/ obj-$(CONFIG_ARCH_RMOBILE) += renesas/ +obj-$(CONFIG_ARCH_RZN1) += renesas/ obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o obj-$(CONFIG_PINCTRL_SUNXI) += sunxi/ obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/ diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig index 509cdd3fb2..0ea39b4a3f 100644 --- a/drivers/pinctrl/renesas/Kconfig +++ b/drivers/pinctrl/renesas/Kconfig @@ -139,3 +139,10 @@ config PINCTRL_PFC_R7S72100 Support pin multiplexing control on Renesas RZ/A1 R7S72100 SoCs. endif + +config PINCTRL_RZN1 + bool "Renesas RZ/N1 R906G032 pin control driver" + depends on RZN1 + default y if RZN1 + help + Support pin multiplexing control on Renesas RZ/N1 R906G032 SoCs. diff --git a/drivers/pinctrl/renesas/Makefile b/drivers/pinctrl/renesas/Makefile index 5cea1423ca..1a61c39d84 100644 --- a/drivers/pinctrl/renesas/Makefile +++ b/drivers/pinctrl/renesas/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_PINCTRL_PFC_R8A779A0) += pfc-r8a779a0.o obj-$(CONFIG_PINCTRL_PFC_R8A779F0) += pfc-r8a779f0.o obj-$(CONFIG_PINCTRL_PFC_R8A779G0) += pfc-r8a779g0.o obj-$(CONFIG_PINCTRL_PFC_R7S72100) += pfc-r7s72100.o +obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o diff --git a/drivers/pinctrl/renesas/pinctrl-rzn1.c b/drivers/pinctrl/renesas/pinctrl-rzn1.c new file mode 100644 index 0000000000..fdc43c8e71 --- /dev/null +++ b/drivers/pinctrl/renesas/pinctrl-rzn1.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2014-2018 Renesas Electronics Europe Limited + * + * Phil Edworthy <phil.edworthy@renesas.com> + * Based on a driver originally written by Michel Pollet at Renesas. + */ + +#include <dt-bindings/pinctrl/rzn1-pinctrl.h> + +#include <dm/device.h> +#include <dm/device_compat.h> +#include <dm/pinctrl.h> +#include <dm/read.h> +#include <regmap.h> + +/* Field positions and masks in the pinmux registers */ +#define RZN1_L1_PIN_DRIVE_STRENGTH 10 +#define RZN1_L1_PIN_DRIVE_STRENGTH_4MA 0 +#define RZN1_L1_PIN_DRIVE_STRENGTH_6MA 1 +#define RZN1_L1_PIN_DRIVE_STRENGTH_8MA 2 +#define RZN1_L1_PIN_DRIVE_STRENGTH_12MA 3 +#define RZN1_L1_PIN_PULL 8 +#define RZN1_L1_PIN_PULL_NONE 0 +#define RZN1_L1_PIN_PULL_UP 1 +#define RZN1_L1_PIN_PULL_DOWN 3 +#define RZN1_L1_FUNCTION 0 +#define RZN1_L1_FUNC_MASK 0xf +#define RZN1_L1_FUNCTION_L2 0xf + +/* + * The hardware manual describes two levels of multiplexing, but it's more + * logical to think of the hardware as three levels, with level 3 consisting of + * the multiplexing for Ethernet MDIO signals. + * + * Level 1 functions go from 0 to 9, with level 1 function '15' (0xf) specifying + * that level 2 functions are used instead. Level 2 has a lot more options, + * going from 0 to 61. Level 3 allows selection of MDIO functions which can be + * floating, or one of seven internal peripherals. Unfortunately, there are two + * level 2 functions that can select MDIO, and two MDIO channels so we have four + * sets of level 3 functions. + * + * For this driver, we've compounded the numbers together, so: + * 0 to 9 is level 1 + * 10 to 71 is 10 + level 2 number + * 72 to 79 is 72 + MDIO0 source for level 2 MDIO function. + * 80 to 87 is 80 + MDIO0 source for level 2 MDIO_E1 function. + * 88 to 95 is 88 + MDIO1 source for level 2 MDIO function. + * 96 to 103 is 96 + MDIO1 source for level 2 MDIO_E1 function. + * Examples: + * Function 28 corresponds UART0 + * Function 73 corresponds to MDIO0 to GMAC0 + * + * There are 170 configurable pins (called PL_GPIO in the datasheet). + */ + +/* + * Structure detailing the HW registers on the RZ/N1 devices. + * Both the Level 1 mux registers and Level 2 mux registers have the same + * structure. The only difference is that Level 2 has additional MDIO registers + * at the end. + */ +struct rzn1_pinctrl_regs { + u32 conf[170]; + u32 pad0[86]; + u32 status_protect; /* 0x400 */ + /* MDIO mux registers, level2 only */ + u32 l2_mdio[2]; +}; + +#define NUM_CONF ARRAY_SIZE(((struct rzn1_pinctrl_regs *)0)->conf) + +#define level1_write(map, member, val) \ + regmap_range_set(map, 0, struct rzn1_pinctrl_regs, member, val) + +#define level1_read(map, member, valp) \ + regmap_range_get(map, 0, struct rzn1_pinctrl_regs, member, valp) + +#define level2_write(map, member, val) \ + regmap_range_set(map, 1, struct rzn1_pinctrl_regs, member, val) + +#define level2_read(map, member, valp) \ + regmap_range_get(map, 1, struct rzn1_pinctrl_regs, member, valp) + +/** + * struct rzn1_pmx_func - describes rzn1 pinmux functions + * @name: the name of this specific function + * @groups: corresponding pin groups + * @num_groups: the number of groups + */ +struct rzn1_pmx_func { + const char *name; + const char **groups; + unsigned int num_groups; +}; + +/** + * struct rzn1_pin_group - describes an rzn1 pin group + * @name: the name of this specific pin group + * @func: the name of the function selected by this group + * @npins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + * @pins: array of pins. Needed due to pinctrl_ops.get_group_pins() + * @pin_ids: array of pin_ids, i.e. the value used to select the mux + */ +struct rzn1_pin_group { + const char *name; + const char *func; + unsigned int npins; + unsigned int *pins; + u8 *pin_ids; +}; + +struct rzn1_pinctrl { + struct device *dev; + struct clk *clk; + struct pinctrl_dev *pctl; + u32 lev1_protect_phys; + u32 lev2_protect_phys; + int mdio_func[2]; + + struct rzn1_pin_group *groups; + unsigned int ngroups; + + struct rzn1_pmx_func *functions; + unsigned int nfunctions; +}; + +struct rzn1_pinctrl_priv { + struct regmap *regmap; + u32 lev1_protect_phys; + u32 lev2_protect_phys; + + struct clk *clk; +}; + +enum { + LOCK_LEVEL1 = 0x1, + LOCK_LEVEL2 = 0x2, + LOCK_ALL = LOCK_LEVEL1 | LOCK_LEVEL2, +}; + +static void rzn1_hw_set_lock(struct rzn1_pinctrl_priv *priv, u8 lock, u8 value) +{ + /* + * The pinmux configuration is locked by writing the physical address of + * the status_protect register to itself. It is unlocked by writing the + * address | 1. + */ + if (lock & LOCK_LEVEL1) { + u32 val = priv->lev1_protect_phys | !(value & LOCK_LEVEL1); + + level1_write(priv->regmap, status_protect, val); + } + + if (lock & LOCK_LEVEL2) { + u32 val = priv->lev2_protect_phys | !(value & LOCK_LEVEL2); + + level2_write(priv->regmap, status_protect, val); + } +} + +static void rzn1_pinctrl_mdio_select(struct rzn1_pinctrl_priv *priv, int mdio, + u32 func) +{ + debug("setting mdio%d to %u\n", mdio, func); + + level2_write(priv->regmap, l2_mdio[mdio], func); +} + +/* + * Using a composite pin description, set the hardware pinmux registers + * with the corresponding values. + * Make sure to unlock write protection and reset it afterward. + * + * NOTE: There is no protection for potential concurrency, it is assumed these + * calls are serialized already. + */ +static int rzn1_set_hw_pin_func(struct rzn1_pinctrl_priv *priv, + unsigned int pin, unsigned int func) +{ + u32 l1_cache; + u32 l2_cache; + u32 l1; + u32 l2; + + /* Level 3 MDIO multiplexing */ + if (func >= RZN1_FUNC_MDIO0_HIGHZ && + func <= RZN1_FUNC_MDIO1_E1_SWITCH) { + int mdio_channel; + u32 mdio_func; + + if (func <= RZN1_FUNC_MDIO1_HIGHZ) + mdio_channel = 0; + else + mdio_channel = 1; + + /* Get MDIO func, and convert the func to the level 2 number */ + if (func <= RZN1_FUNC_MDIO0_SWITCH) { + mdio_func = func - RZN1_FUNC_MDIO0_HIGHZ; + func = RZN1_FUNC_ETH_MDIO; + } else if (func <= RZN1_FUNC_MDIO0_E1_SWITCH) { + mdio_func = func - RZN1_FUNC_MDIO0_E1_HIGHZ; + func = RZN1_FUNC_ETH_MDIO_E1; + } else if (func <= RZN1_FUNC_MDIO1_SWITCH) { + mdio_func = func - RZN1_FUNC_MDIO1_HIGHZ; + func = RZN1_FUNC_ETH_MDIO; + } else { + mdio_func = func - RZN1_FUNC_MDIO1_E1_HIGHZ; + func = RZN1_FUNC_ETH_MDIO_E1; + } + rzn1_pinctrl_mdio_select(priv, mdio_channel, mdio_func); + } + + /* Note here, we do not allow anything past the MDIO Mux values */ + if (pin >= NUM_CONF || func >= RZN1_FUNC_MDIO0_HIGHZ) + return -EINVAL; + + level1_read(priv->regmap, conf[pin], &l1); + l1_cache = l1; + level2_read(priv->regmap, conf[pin], &l2); + l2_cache = l2; + + debug("setting func for pin %u to %u\n", pin, func); + + l1 &= ~(RZN1_L1_FUNC_MASK << RZN1_L1_FUNCTION); + + if (func < RZN1_FUNC_L2_OFFSET) { + l1 |= (func << RZN1_L1_FUNCTION); + } else { + l1 |= (RZN1_L1_FUNCTION_L2 << RZN1_L1_FUNCTION); + + l2 = func - RZN1_FUNC_L2_OFFSET; + } + + /* If either configuration changes, we update both anyway */ + if (l1 != l1_cache || l2 != l2_cache) { + level1_write(priv->regmap, conf[pin], l1); + level2_write(priv->regmap, conf[pin], l2); + } + + return 0; +} + +static int rzn1_pinconf_set(struct rzn1_pinctrl_priv *priv, unsigned int pin, + unsigned int bias, unsigned int strength) +{ + u32 l1, l1_cache; + u32 drv = RZN1_L1_PIN_DRIVE_STRENGTH_8MA; + + level1_read(priv->regmap, conf[pin], &l1); + l1_cache = l1; + + switch (bias) { + case PIN_CONFIG_BIAS_PULL_UP: + debug("set pin %d pull up\n", pin); + l1 &= ~(0x3 << RZN1_L1_PIN_PULL); + l1 |= (RZN1_L1_PIN_PULL_UP << RZN1_L1_PIN_PULL); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + debug("set pin %d pull down\n", pin); + l1 &= ~(0x3 << RZN1_L1_PIN_PULL); + l1 |= (RZN1_L1_PIN_PULL_DOWN << RZN1_L1_PIN_PULL); + break; + case PIN_CONFIG_BIAS_DISABLE: + debug("set pin %d bias off\n", pin); + l1 &= ~(0x3 << RZN1_L1_PIN_PULL); + l1 |= (RZN1_L1_PIN_PULL_NONE << RZN1_L1_PIN_PULL); + break; + } + + switch (strength) { + case 4: + drv = RZN1_L1_PIN_DRIVE_STRENGTH_4MA; + break; + case 6: + drv = RZN1_L1_PIN_DRIVE_STRENGTH_6MA; + break; + case 8: + drv = RZN1_L1_PIN_DRIVE_STRENGTH_8MA; + break; + case 12: + drv = RZN1_L1_PIN_DRIVE_STRENGTH_12MA; + break; + } + + debug("set pin %d drv %umA\n", pin, drv); + + l1 &= ~(0x3 << RZN1_L1_PIN_DRIVE_STRENGTH); + l1 |= (drv << RZN1_L1_PIN_DRIVE_STRENGTH); + + if (l1 != l1_cache) + level1_write(priv->regmap, conf[pin], l1); + + return 0; +} + +static int rzn1_pinctrl_set_state(struct udevice *dev, struct udevice *config) +{ + struct rzn1_pinctrl_priv *priv = dev_get_priv(dev); + int size; + int ret; + u32 val; + u32 bias; + + /* Pullup/down bias, common to all pins in group */ + bias = PIN_CONFIG_BIAS_PULL_UP; + if (dev_read_bool(config, "bias-disable")) + bias = PIN_CONFIG_BIAS_DISABLE; + else if (dev_read_bool(config, "bias-pull-up")) + bias = PIN_CONFIG_BIAS_PULL_UP; + else if (dev_read_bool(config, "bias-pull-down")) + bias = PIN_CONFIG_BIAS_PULL_DOWN; + + /* Drive strength, common to all pins in group */ + u32 strength = dev_read_u32_default(config, "drive-strength", 8); + + /* Number of pins */ + ret = dev_read_size(config, "pinmux"); + if (ret < 0) + return ret; + + size = ret / sizeof(val); + + for (int i = 0; i < size; i++) { + ret = dev_read_u32_index(config, "pinmux", i, &val); + if (ret) + return ret; + unsigned int pin = val & 0xff; + unsigned int func = val >> 8; + + debug("%s pin %d func %d bias %d strength %d\n", + config->name, pin, func, bias, strength); + + rzn1_hw_set_lock(priv, LOCK_ALL, LOCK_ALL); + rzn1_set_hw_pin_func(priv, pin, func); + rzn1_pinconf_set(priv, pin, bias, strength); + rzn1_hw_set_lock(priv, LOCK_ALL, 0); + } + + return 0; +} + +static struct pinctrl_ops rzn1_pinctrl_ops = { + .set_state = rzn1_pinctrl_set_state, +}; + +static int rzn1_pinctrl_probe(struct udevice *dev) +{ + struct rzn1_pinctrl_priv *priv = dev_get_priv(dev); + ofnode node = dev_ofnode(dev); + int ret; + + ret = regmap_init_mem(node, &priv->regmap); + if (ret) + return ret; + + priv->lev1_protect_phys = (u32)regmap_get_range(priv->regmap, 0) + + offsetof(struct rzn1_pinctrl_regs, status_protect); + priv->lev2_protect_phys = (u32)regmap_get_range(priv->regmap, 1) + + offsetof(struct rzn1_pinctrl_regs, status_protect); + + return 0; +} + +static const struct udevice_id rzn1_pinctrl_ids[] = { + { .compatible = "renesas,rzn1-pinctrl", }, + { }, +}; + +U_BOOT_DRIVER(pinctrl_rzn1) = { + .name = "rzn1-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rzn1_pinctrl_ids, + .priv_auto = sizeof(struct rzn1_pinctrl_priv), + .ops = &rzn1_pinctrl_ops, + .probe = rzn1_pinctrl_probe, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 1acf212f87..bf99964577 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -108,6 +108,7 @@ config IMXRT_SDRAM This driver is for the sdram memory interface with the SEMC. source "drivers/ram/aspeed/Kconfig" +source "drivers/ram/cadence/Kconfig" source "drivers/ram/rockchip/Kconfig" source "drivers/ram/sifive/Kconfig" source "drivers/ram/stm32mp1/Kconfig" diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index 2b9429cfee..6eb1a24135 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -24,3 +24,6 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive/ endif obj-$(CONFIG_ARCH_OCTEON) += octeon/ + +obj-$(CONFIG_ARCH_RMOBILE) += renesas/ +obj-$(CONFIG_CADENCE_DDR_CTRL) += cadence/ diff --git a/drivers/ram/cadence/Kconfig b/drivers/ram/cadence/Kconfig new file mode 100644 index 0000000000..2d5469cb8e --- /dev/null +++ b/drivers/ram/cadence/Kconfig @@ -0,0 +1,12 @@ +if RAM || SPL_RAM + +config CADENCE_DDR_CTRL + bool "Enable Cadence DDR controller" + depends on DM + help + Enable support for Cadence DDR controller, as found on + the Renesas RZ/N1 SoC. This controller has a large number + of registers which need to be programmed, mostly using values + obtained from Denali SOMA files via a TCL script. + +endif diff --git a/drivers/ram/cadence/Makefile b/drivers/ram/cadence/Makefile new file mode 100644 index 0000000000..b4226cf6f2 --- /dev/null +++ b/drivers/ram/cadence/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_CADENCE_DDR_CTRL) += ddr_ctrl.o diff --git a/drivers/ram/cadence/ddr_ctrl.c b/drivers/ram/cadence/ddr_ctrl.c new file mode 100644 index 0000000000..3e5959a84a --- /dev/null +++ b/drivers/ram/cadence/ddr_ctrl.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: BSD-2-Clause +/* + * Cadence DDR Controller + * + * Copyright (C) 2015 Renesas Electronics Europe Ltd + */ + +/* + * The Cadence DDR Controller has a huge number of registers that principally + * cover two aspects, DDR specific timing information and AXI bus interfacing. + * Cadence's TCL script generates all of the register values for specific + * DDR devices operating at a specific frequency. The TCL script uses Denali + * SOMA files as inputs. The tool also generates the AXI bus register values as + * well, however this driver assumes that users will want to modifiy these to + * meet a specific application's needs. + * Therefore, this driver is passed two arrays containing register values for + * the DDR device specific information, and explicity sets the AXI registers. + * + * AXI bus interfacing: + * The controller has four AXI slaves connections, and each of these can be + * programmed to accept requests from specific AXI masters (using their IDs). + * The regions of DDR that can be accessed by each AXI slave can be set such + * as to isolate DDR used by one AXI master from another. Further, the maximum + * bandwidth allocated to each AXI slave can be set. + */ + +#include <common.h> +#include <linux/delay.h> +#include <linux/sizes.h> +#include <asm/io.h> +#include <wait_bit.h> +#include <renesas/ddr_ctrl.h> + +/* avoid warning for real pr_debug in <linux/printk.h> */ +#ifdef pr_debug +#undef pr_debug +#endif + +#ifdef DEBUG + #define pr_debug(fmt, args...) printf(fmt, ##args) + #define pr_debug2(fmt, args...) printf(fmt, ##args) +#else + #define pr_debug(fmt, args...) + #define pr_debug2(fmt, args...) +#endif + +#define DDR_NR_AXI_PORTS 4 +#define DDR_NR_ENTRIES 16 + +#define DDR_START_REG (0) /* DENALI_CTL_00 */ +#define DDR_CS0_MR1_REG (32 * 4) /* DENALI_CTL_32 */ +#define DDR_CS0_MR2_REG (32 * 4 + 2) /* DENALI_CTL_32 */ +#define DDR_CS1_MR1_REG (34 * 4 + 2) /* DENALI_CTL_34 */ +#define DDR_CS1_MR2_REG (35 * 4) /* DENALI_CTL_35 */ +#define DDR_ECC_ENABLE_REG (36 * 4 + 2) /* DENALI_CTL_36 */ +#define DDR_ECC_DISABLE_W_UC_ERR_REG (37 * 4 + 2) /* DENALI_CTL_37 */ +#define DDR_HALF_DATAPATH_REG (54 * 4) /* DENALI_CTL_54 */ +#define DDR_INTERRUPT_STATUS (56 * 4) /* DENALI_CTL_56 */ +#define DDR_INTERRUPT_ACK (57 * 4) /* DENALI_CTL_57 */ +#define DDR_INTERRUPT_MASK (58 * 4) /* DENALI_CTL_58 */ +#define DDR_CS0_ODT_MAP_REG (62 * 4 + 2) /* DENALI_CTL_62 */ +#define DDR_CS1_ODT_MAP_REG (63 * 4) /* DENALI_CTL_63 */ +#define DDR_ODT_TODTL_2CMD (63 * 4 + 2) /* DENALI_CTL_63 */ +#define DDR_ODT_TODTH_WR (63 * 4 + 3) /* DENALI_CTL_63 */ +#define DDR_ODT_TODTH_RD (64 * 4 + 0) /* DENALI_CTL_64 */ +#define DDR_ODT_EN (64 * 4 + 1) /* DENALI_CTL_64 */ +#define DDR_ODT_WR_TO_ODTH (64 * 4 + 2) /* DENALI_CTL_64 */ +#define DDR_ODT_RD_TO_ODTH (64 * 4 + 3) /* DENALI_CTL_64 */ +#define DDR_DIFF_CS_DELAY_REG (66 * 4) /* DENALI_CTL_66 */ +#define DDR_SAME_CS_DELAY_REG (67 * 4) /* DENALI_CTL_67 */ +#define DDR_RW_PRIORITY_REGS (87 * 4 + 2) /* DENALI_CTL_87 */ +#define DDR_RW_FIFO_TYPE_REGS (88 * 4) /* DENALI_CTL_88 */ +#define DDR_AXI_PORT_PROT_ENABLE_REG (90 * 4 + 3) /* DENALI_CTL_90 */ +#define DDR_ADDR_RANGE_REGS (91 * 4) /* DENALI_CTL_91 */ +#define DDR_RANGE_PROT_REGS (218 * 4 + 2) /* DENALI_CTL_218 */ +#define DDR_ARB_CMD_Q_THRESHOLD_REG (346 * 4 + 2) /* DENALI_CTL_346 */ +#define DDR_AXI_PORT_BANDWIDTH_REG (346 * 4 + 3) /* DENALI_CTL_346 */ +#define DDR_OPT_RMODW_REG (372 * 4 + 3) /* DENALI_CTL_372 */ + +static void ddrc_writeb(u8 val, void *p) +{ + pr_debug2("DDR: %p = 0x%02x\n", p, val); + writeb(val, p); +} + +static void ddrc_writew(u16 val, void *p) +{ + pr_debug2("DDR: %p = 0x%04x\n", p, val); + writew(val, p); +} + +static void ddrc_writel(u32 val, void *p) +{ + pr_debug2("DDR: %p = 0x%08x\n", p, val); + writel(val, p); +} + +void cdns_ddr_set_mr1(void *base, int cs, u16 odt_impedance, u16 drive_strength) +{ + void *reg; + u16 tmp; + + if (cs == 0) + reg = (u8 *)base + DDR_CS0_MR1_REG; + else + reg = (u8 *)base + DDR_CS1_MR1_REG; + + tmp = readw(reg); + + tmp &= ~MODE_REGISTER_MASK; + tmp |= MODE_REGISTER_MR1; + + tmp &= ~MR1_ODT_IMPEDANCE_MASK; + tmp |= odt_impedance; + + tmp &= ~MR1_DRIVE_STRENGTH_MASK; + tmp |= drive_strength; + + writew(tmp, reg); +} + +void cdns_ddr_set_mr2(void *base, int cs, u16 dynamic_odt, u16 self_refresh_temp) +{ + void *reg; + u16 tmp; + + if (cs == 0) + reg = (u8 *)base + DDR_CS0_MR2_REG; + else + reg = (u8 *)base + DDR_CS1_MR2_REG; + + tmp = readw(reg); + + tmp &= ~MODE_REGISTER_MASK; + tmp |= MODE_REGISTER_MR2; + + tmp &= ~MR2_DYNAMIC_ODT_MASK; + tmp |= dynamic_odt; + + tmp &= ~MR2_SELF_REFRESH_TEMP_MASK; + tmp |= self_refresh_temp; + + writew(tmp, reg); +} + +void cdns_ddr_set_odt_map(void *base, int cs, u16 odt_map) +{ + void *reg; + + if (cs == 0) + reg = (u8 *)base + DDR_CS0_ODT_MAP_REG; + else + reg = (u8 *)base + DDR_CS1_ODT_MAP_REG; + + writew(odt_map, reg); +} + +void cdns_ddr_set_odt_times(void *base, u8 TODTL_2CMD, u8 TODTH_WR, u8 TODTH_RD, + u8 WR_TO_ODTH, u8 RD_TO_ODTH) +{ + writeb(TODTL_2CMD, (u8 *)base + DDR_ODT_TODTL_2CMD); + writeb(TODTH_WR, (u8 *)base + DDR_ODT_TODTH_WR); + writeb(TODTH_RD, (u8 *)base + DDR_ODT_TODTH_RD); + writeb(1, (u8 *)base + DDR_ODT_EN); + writeb(WR_TO_ODTH, (u8 *)base + DDR_ODT_WR_TO_ODTH); + writeb(RD_TO_ODTH, (u8 *)base + DDR_ODT_RD_TO_ODTH); +} + +void cdns_ddr_set_same_cs_delays(void *base, u8 r2r, u8 r2w, u8 w2r, u8 w2w) +{ + u32 val = (w2w << 24) | (w2r << 16) | (r2w << 8) | r2r; + + writel(val, (u8 *)base + DDR_SAME_CS_DELAY_REG); +} + +void cdns_ddr_set_diff_cs_delays(void *base, u8 r2r, u8 r2w, u8 w2r, u8 w2w) +{ + u32 val = (w2w << 24) | (w2r << 16) | (r2w << 8) | r2r; + + writel(val, (u8 *)base + DDR_DIFF_CS_DELAY_REG); +} + +void cdns_ddr_set_port_rw_priority(void *base, int port, + u8 read_pri, u8 write_pri) +{ + u8 *reg8 = (u8 *)base + DDR_RW_PRIORITY_REGS; + + reg8 += (port * 3); + pr_debug("%s port %d (reg8=%p, DENALI_CTL_%d)\n", + __func__, port, reg8, (reg8 - (u8 *)base) / 4); + + ddrc_writeb(read_pri, reg8++); + ddrc_writeb(write_pri, reg8++); +} + +/* The DDR Controller has 16 entries. Each entry can specify an allowed address + * range (with 16KB resolution) for one of the 4 AXI slave ports. + */ +void cdns_ddr_enable_port_addr_range(void *base, int port, int entry, + u32 addr_start, u32 size) +{ + u32 addr_end; + u32 *reg32 = (u32 *)((u8 *)base + DDR_ADDR_RANGE_REGS); + u32 tmp; + + reg32 += (port * DDR_NR_ENTRIES * 2); + reg32 += (entry * 2); + pr_debug("%s port %d, entry %d (reg32=%p, DENALI_CTL_%d)\n", + __func__, port, entry, reg32, ((u8 *)reg32 - (u8 *)base) / 4); + + /* These registers represent 16KB address blocks */ + addr_start /= SZ_16K; + size /= SZ_16K; + if (size) + addr_end = addr_start + size - 1; + else + addr_end = addr_start; + + ddrc_writel(addr_start, reg32++); + + /* + * end_addr: Ensure we only set the bottom 18-bits as DENALI_CTL_218 + * also contains the AXI0 range protection bits. + */ + tmp = readl(reg32); + tmp &= ~(BIT(18) - 1); + tmp |= addr_end; + ddrc_writel(tmp, reg32); +} + +void cdns_ddr_enable_addr_range(void *base, int entry, + u32 addr_start, u32 size) +{ + int axi; + + for (axi = 0; axi < DDR_NR_AXI_PORTS; axi++) + cdns_ddr_enable_port_addr_range(base, axi, entry, + addr_start, size); +} + +void cdns_ddr_enable_port_prot(void *base, int port, int entry, + enum cdns_ddr_range_prot range_protection_bits, + u16 range_RID_check_bits, + u16 range_WID_check_bits, + u8 range_RID_check_bits_ID_lookup, + u8 range_WID_check_bits_ID_lookup) +{ + /* + * Technically, the offset here points to the byte before the start of + * the range protection registers. However, all entries consist of 8 + * bytes, except the first one (which is missing a padding byte) so we + * work around that subtlely. + */ + u8 *reg8 = (u8 *)base + DDR_RANGE_PROT_REGS; + + reg8 += (port * DDR_NR_ENTRIES * 8); + reg8 += (entry * 8); + pr_debug("%s port %d, entry %d (reg8=%p, DENALI_CTL_%d)\n", + __func__, port, entry, reg8, (reg8 - (u8 *)base) / 4); + + if (port == 0 && entry == 0) + ddrc_writeb(range_protection_bits, reg8 + 1); + else + ddrc_writeb(range_protection_bits, reg8); + + ddrc_writew(range_RID_check_bits, reg8 + 2); + ddrc_writew(range_WID_check_bits, reg8 + 4); + ddrc_writeb(range_RID_check_bits_ID_lookup, reg8 + 6); + ddrc_writeb(range_WID_check_bits_ID_lookup, reg8 + 7); +} + +void cdns_ddr_enable_prot(void *base, int entry, + enum cdns_ddr_range_prot range_protection_bits, + u16 range_RID_check_bits, + u16 range_WID_check_bits, + u8 range_RID_check_bits_ID_lookup, + u8 range_WID_check_bits_ID_lookup) +{ + int axi; + + for (axi = 0; axi < DDR_NR_AXI_PORTS; axi++) + cdns_ddr_enable_port_prot(base, axi, entry, + range_protection_bits, + range_RID_check_bits, + range_WID_check_bits, + range_RID_check_bits_ID_lookup, + range_WID_check_bits_ID_lookup); +} + +void cdns_ddr_set_port_bandwidth(void *base, int port, + u8 max_percent, u8 overflow_ok) +{ + u8 *reg8 = (u8 *)base + DDR_AXI_PORT_BANDWIDTH_REG; + + reg8 += (port * 3); + pr_debug("%s port %d, (reg8=%p, DENALI_CTL_%d)\n", + __func__, port, reg8, (reg8 - (u8 *)base) / 4); + + ddrc_writeb(max_percent, reg8++); /* Maximum bandwidth percentage */ + ddrc_writeb(overflow_ok, reg8++); /* Bandwidth overflow allowed */ +} + +void cdns_ddr_ctrl_init(void *ddr_ctrl_basex, int async, + const u32 *reg0, const u32 *reg350, + u32 ddr_start_addr, u32 ddr_size, + int enable_ecc, int enable_8bit) +{ + int i, axi, entry; + u32 *ddr_ctrl_base = (u32 *)ddr_ctrl_basex; + u8 *base8 = (u8 *)ddr_ctrl_basex; + + ddrc_writel(*reg0, ddr_ctrl_base + 0); + /* 1 to 6 are read only */ + for (i = 7; i <= 26; i++) + ddrc_writel(*(reg0 + i), ddr_ctrl_base + i); + /* 27 to 29 are not changed */ + for (i = 30; i <= 87; i++) + ddrc_writel(*(reg0 + i), ddr_ctrl_base + i); + + /* Enable/disable ECC */ + if (enable_ecc) { + pr_debug("%s enabling ECC\n", __func__); + ddrc_writeb(1, base8 + DDR_ECC_ENABLE_REG); + } else { + ddrc_writeb(0, base8 + DDR_ECC_ENABLE_REG); + } + + /* ECC: Disable corruption for read/modify/write operations */ + ddrc_writeb(1, base8 + DDR_ECC_DISABLE_W_UC_ERR_REG); + + /* Set 8/16-bit data width using reduce bit (enable half datapath)*/ + if (enable_8bit) { + pr_debug("%s using 8-bit data\n", __func__); + ddrc_writeb(1, base8 + DDR_HALF_DATAPATH_REG); + } else { + ddrc_writeb(0, base8 + DDR_HALF_DATAPATH_REG); + } + + /* Threshold for command queue */ + ddrc_writeb(4, base8 + DDR_ARB_CMD_Q_THRESHOLD_REG); + + /* AXI port protection => enable */ + ddrc_writeb(0x01, base8 + DDR_AXI_PORT_PROT_ENABLE_REG); + + /* Set port interface type, default port priority and bandwidths */ + for (axi = 0; axi < DDR_NR_AXI_PORTS; axi++) { + /* port interface type: synchronous or asynchronous AXI clock */ + u8 *fifo_reg = base8 + DDR_RW_FIFO_TYPE_REGS + (axi * 3); + + if (async) + ddrc_writeb(0, fifo_reg); + else + ddrc_writeb(3, fifo_reg); + + /* R/W priorities */ + cdns_ddr_set_port_rw_priority(ddr_ctrl_base, axi, 2, 2); + + /* AXI bandwidth */ + cdns_ddr_set_port_bandwidth(ddr_ctrl_base, axi, 50, 1); + } + + /* + * The hardware requires that the valid address ranges must not overlap. + * So, we initialise all address ranges to be above the DDR, length 0. + */ + for (entry = 0; entry < DDR_NR_ENTRIES; entry++) + cdns_ddr_enable_addr_range(ddr_ctrl_base, entry, + ddr_start_addr + ddr_size, 0); + + for (i = 350; i <= 374; i++) + ddrc_writel(*(reg350 - 350 + i), ddr_ctrl_base + i); + + /* Disable optimised read-modify-write logic */ + ddrc_writeb(0, base8 + DDR_OPT_RMODW_REG); + + /* + * Disable all interrupts, we are not handling them. + * For detail of the interrupt mask, ack and status bits, see the + * manual's description of the 'int_status' parameter. + */ + ddrc_writel(0, base8 + DDR_INTERRUPT_MASK); + + /* + * Default settings to enable full access to the entire DDR. + * Users can set different ranges and access rights by calling these + * functions before calling cdns_ddr_ctrl_start(). + */ + cdns_ddr_enable_addr_range(ddr_ctrl_base, 0, + ddr_start_addr, ddr_size); + cdns_ddr_enable_prot(ddr_ctrl_base, 0, CDNS_DDR_RANGE_PROT_BITS_FULL, + 0xffff, 0xffff, 0x0f, 0x0f); +} + +void cdns_ddr_ctrl_start(void *ddr_ctrl_basex) +{ + u32 *ddr_ctrl_base = (u32 *)ddr_ctrl_basex; + u8 *base8 = (u8 *)ddr_ctrl_basex; + + /* Start */ + ddrc_writeb(1, base8 + DDR_START_REG); + + /* Wait for controller to be ready (interrupt status) */ + wait_for_bit_le32(base8 + DDR_INTERRUPT_STATUS, 0x100, true, 1000, false); + + /* clear all interrupts */ + ddrc_writel(~0, base8 + DDR_INTERRUPT_ACK); + + /* Step 19 Wait 500us from MRESETB=1 */ + udelay(500); + + /* Step 20 tCKSRX wait (From supply stable clock for MCK) */ + /* DENALI_CTL_19 TREF_ENABLE=0x1(=1), AREFRESH=0x1(=1) */ + ddrc_writel(0x01000100, ddr_ctrl_base + 19); +} diff --git a/drivers/ram/renesas/Makefile b/drivers/ram/renesas/Makefile new file mode 100644 index 0000000000..705cc4b6fa --- /dev/null +++ b/drivers/ram/renesas/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-$(CONFIG_RZN1) += rzn1/ diff --git a/drivers/ram/renesas/rzn1/Makefile b/drivers/ram/renesas/rzn1/Makefile new file mode 100644 index 0000000000..357c2a506e --- /dev/null +++ b/drivers/ram/renesas/rzn1/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += ddr_async.o diff --git a/drivers/ram/renesas/rzn1/ddr_async.c b/drivers/ram/renesas/rzn1/ddr_async.c new file mode 100644 index 0000000000..7a81497bc9 --- /dev/null +++ b/drivers/ram/renesas/rzn1/ddr_async.c @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: BSD-2-Clause +/* + * RZ/N1 DDR Controller initialisation + * + * The DDR Controller register values for a specific DDR device, mode and + * frequency are generated using a Cadence tool. + * + * Copyright (C) 2015 Renesas Electronics Europe Ltd + */ +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <ram.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> +#include <linux/delay.h> +#include <wait_bit.h> +#include <renesas/ddr_ctrl.h> + +void clk_rzn1_reset_state(struct clk *clk, int on); + +DECLARE_GLOBAL_DATA_PTR; + +struct cadence_ddr_info { + struct udevice *dev; + void __iomem *ddrc; + void __iomem *phy; + struct clk clk_ddrc; + struct clk hclk_ddrc; + struct regmap *syscon; + bool enable_ecc; + bool enable_8bit; + u32 ddr_size; + + /* These two used only during .probe */ + u32 *reg0; + u32 *reg350; +}; + +static inline u32 cadence_readl(void __iomem *addr, unsigned int offset) +{ + return readl(addr + offset); +} + +static inline void cadence_writel(void __iomem *addr, unsigned int offset, + u32 data) +{ + debug("%s: addr = 0x%p, value = 0x%08x\n", __func__, addr + offset, data); + writel(data, addr + offset); +} + +#define ddrc_readl(off) cadence_readl(priv->ddrc, off) +#define ddrc_writel(val, off) cadence_writel(priv->ddrc, off, val) + +#define phy_readl(off) cadence_readl(priv->phy, off) +#define phy_writel(val, off) cadence_writel(priv->phy, off, val) + +#define RZN1_DDR3_SINGLE_BANK 3 +#define RZN1_DDR3_DUAL_BANK 32 + +#define FUNCCTRL 0x00 +#define FUNCCTRL_MASKSDLOFS (0x18 << 16) +#define FUNCCTRL_DVDDQ_1_5V BIT(8) +#define FUNCCTRL_RESET_N BIT(0) +#define DLLCTRL 0x04 +#define DLLCTRL_ASDLLOCK BIT(26) +#define DLLCTRL_MFSL_500MHz (2 << 1) +#define DLLCTRL_MDLLSTBY BIT(0) +#define ZQCALCTRL 0x08 +#define ZQCALCTRL_ZQCALEND BIT(30) +#define ZQCALCTRL_ZQCALRSTB BIT(0) +#define ZQODTCTRL 0x0c +#define RDCTRL 0x10 +#define RDTMG 0x14 +#define FIFOINIT 0x18 +#define FIFOINIT_RDPTINITEXE BIT(8) +#define FIFOINIT_WRPTINITEXE BIT(0) +#define OUTCTRL 0x1c +#define OUTCTRL_ADCMDOE BIT(0) +#define WLCTRL1 0x40 +#define WLCTRL1_WLSTR BIT(24) +#define DQCALOFS1 0xe8 + +/* DDR PHY setup */ +static void ddr_phy_init(struct cadence_ddr_info *priv, int ddr_type) +{ + u32 val; + + /* Disable DDR Controller clock and FlexWAY connection */ + clk_disable(&priv->hclk_ddrc); + clk_disable(&priv->clk_ddrc); + + clk_rzn1_reset_state(&priv->hclk_ddrc, 0); + clk_rzn1_reset_state(&priv->clk_ddrc, 0); + + /* Enable DDR Controller clock and FlexWAY connection */ + clk_enable(&priv->clk_ddrc); + clk_enable(&priv->hclk_ddrc); + + /* DDR PHY Soft reset assert */ + ddrc_writel(FUNCCTRL_MASKSDLOFS | FUNCCTRL_DVDDQ_1_5V, FUNCCTRL); + + clk_rzn1_reset_state(&priv->hclk_ddrc, 1); + clk_rzn1_reset_state(&priv->clk_ddrc, 1); + + /* DDR PHY setup */ + phy_writel(DLLCTRL_MFSL_500MHz | DLLCTRL_MDLLSTBY, DLLCTRL); + phy_writel(0x00000182, ZQCALCTRL); + if (ddr_type == RZN1_DDR3_DUAL_BANK) + phy_writel(0xAB330031, ZQODTCTRL); + else if (ddr_type == RZN1_DDR3_SINGLE_BANK) + phy_writel(0xAB320051, ZQODTCTRL); + else /* DDR2 */ + phy_writel(0xAB330071, ZQODTCTRL); + phy_writel(0xB545B544, RDCTRL); + phy_writel(0x000000B0, RDTMG); + phy_writel(0x020A0806, OUTCTRL); + if (ddr_type == RZN1_DDR3_DUAL_BANK) + phy_writel(0x80005556, WLCTRL1); + else + phy_writel(0x80005C5D, WLCTRL1); + phy_writel(0x00000101, FIFOINIT); + phy_writel(0x00004545, DQCALOFS1); + + /* Step 9 MDLL reset release */ + val = phy_readl(DLLCTRL); + val &= ~DLLCTRL_MDLLSTBY; + phy_writel(val, DLLCTRL); + + /* Step 12 Soft reset release */ + val = phy_readl(FUNCCTRL); + val |= FUNCCTRL_RESET_N; + phy_writel(val, FUNCCTRL); + + /* Step 13 FIFO pointer initialize */ + phy_writel(FIFOINIT_RDPTINITEXE | FIFOINIT_WRPTINITEXE, FIFOINIT); + + /* Step 14 Execute ZQ Calibration */ + val = phy_readl(ZQCALCTRL); + val |= ZQCALCTRL_ZQCALRSTB; + phy_writel(val, ZQCALCTRL); + + /* Step 15 Wait for 200us or more, or wait for DFIINITCOMPLETE to be "1" */ + wait_for_bit_le32(priv->phy + DLLCTRL, DLLCTRL_ASDLLOCK, true, 1, false); + wait_for_bit_le32(priv->phy + ZQCALCTRL, ZQCALCTRL_ZQCALEND, true, 1, false); + + /* Step 16 Enable Address and Command output */ + val = phy_readl(OUTCTRL); + val |= OUTCTRL_ADCMDOE; + phy_writel(val, OUTCTRL); + + /* Step 17 Wait for 200us or more(from MRESETB=0) */ + udelay(200); +} + +static void ddr_phy_enable_wl(struct cadence_ddr_info *priv) +{ + u32 val; + + /* Step 26 (Set Write Leveling) */ + val = phy_readl(WLCTRL1); + val |= WLCTRL1_WLSTR; + phy_writel(val, WLCTRL1); +} + +#define RZN1_V_DDR_BASE 0x80000000 /* RZ/N1D only */ + +static void rzn1_ddr3_single_bank(void *ddr_ctrl_base) +{ + /* CS0 */ + cdns_ddr_set_mr1(ddr_ctrl_base, 0, + MR1_ODT_IMPEDANCE_60_OHMS, + MR1_DRIVE_STRENGTH_40_OHMS); + cdns_ddr_set_mr2(ddr_ctrl_base, 0, + MR2_DYNAMIC_ODT_OFF, + MR2_SELF_REFRESH_TEMP_EXT); + + /* ODT_WR_MAP_CS0 = 1, ODT_RD_MAP_CS0 = 0 */ + cdns_ddr_set_odt_map(ddr_ctrl_base, 0, 0x0100); +} + +static int rzn1_dram_init(struct cadence_ddr_info *priv) +{ + u32 version; + u32 ddr_start_addr = 0; + + ddr_phy_init(priv, RZN1_DDR3_SINGLE_BANK); + + /* + * Override DDR PHY Interface (DFI) related settings + * DFI is the internal interface between the DDR controller and the DDR PHY. + * These settings are specific to the board and can't be known by the settings + * provided for each DDR model within the generated include. + */ + priv->reg350[351 - 350] = 0x001e0000; + priv->reg350[352 - 350] = 0x1e680000; + priv->reg350[353 - 350] = 0x02000020; + priv->reg350[354 - 350] = 0x02000200; + priv->reg350[355 - 350] = 0x00000c30; + priv->reg350[356 - 350] = 0x00009808; + priv->reg350[357 - 350] = 0x020a0706; + priv->reg350[372 - 350] = 0x01000000; + + /* + * On ES1.0 devices, the DDR start address that the DDR Controller sees + * is the physical address of the DDR. However, later devices changed it + * to be 0 in order to fix an issue with DDR out-of-range detection. + */ +#define RZN1_SYSCTRL_REG_VERSION 412 + regmap_read(priv->syscon, RZN1_SYSCTRL_REG_VERSION, &version); + if (version == 0x10) + ddr_start_addr = RZN1_V_DDR_BASE; + + if (priv->enable_ecc) + priv->ddr_size = priv->ddr_size / 2; + + /* DDR Controller is always in ASYNC mode */ + cdns_ddr_ctrl_init(priv->ddrc, 1, + priv->reg0, priv->reg350, + ddr_start_addr, priv->ddr_size, + priv->enable_ecc, priv->enable_8bit); + + rzn1_ddr3_single_bank(priv->ddrc); + cdns_ddr_set_diff_cs_delays(priv->ddrc, 2, 7, 2, 2); + cdns_ddr_set_same_cs_delays(priv->ddrc, 0, 7, 0, 0); + cdns_ddr_set_odt_times(priv->ddrc, 5, 6, 6, 0, 4); + cdns_ddr_ctrl_start(priv->ddrc); + + ddr_phy_enable_wl(priv); + + if (priv->enable_ecc) { + /* + * Any read before a write will trigger an ECC un-correctable error, + * causing a data abort. However, this is also true for any read with a + * size less than the AXI bus width. So, the only sensible solution is + * to write to all of DDR now and take the hit... + */ + memset((void *)RZN1_V_DDR_BASE, 0xff, priv->ddr_size); + } + + return 0; +} + +static int cadence_ddr_get_info(struct udevice *udev, struct ram_info *info) +{ + info->base = 0; + info->size = gd->ram_size; + + return 0; +} + +static struct ram_ops cadence_ddr_ops = { + .get_info = cadence_ddr_get_info, +}; + +static int cadence_ddr_test(long *base, long maxsize) +{ + volatile long *addr = base; + long cnt; + + maxsize /= sizeof(long); + + for (cnt = 1; cnt <= maxsize; cnt <<= 1) { + addr[cnt - 1] = ~cnt; + } + + for (cnt = 1; cnt <= maxsize; cnt <<= 1) { + if (addr[cnt - 1] != ~cnt) { + return 0; + } + } + + return 1; +} + +static int cadence_ddr_probe(struct udevice *dev) +{ + struct cadence_ddr_info *priv = dev_get_priv(dev); + ofnode subnode; + int ret; + + priv->dev = dev; + + priv->ddrc = dev_remap_addr_name(dev, "ddrc"); + if (!priv->ddrc) { + dev_err(dev, "No reg property for Cadence DDR CTRL\n"); + return -EINVAL; + } + + priv->phy = dev_remap_addr_name(dev, "phy"); + if (!priv->phy) { + dev_err(dev, "No reg property for Cadence DDR PHY\n"); + return -EINVAL; + } + + ret = clk_get_by_name(dev, "clk_ddrc", &priv->clk_ddrc); + if (ret) { + dev_err(dev, "No clock for Cadence DDR\n"); + return ret; + } + + ret = clk_get_by_name(dev, "hclk_ddrc", &priv->hclk_ddrc); + if (ret) { + dev_err(dev, "No HCLK for Cadence DDR\n"); + return ret; + } + + priv->syscon = syscon_regmap_lookup_by_phandle(dev, "syscon"); + if (IS_ERR(priv->syscon)) { + dev_err(dev, "No syscon node found\n"); + return PTR_ERR(priv->syscon); + } + + priv->enable_ecc = dev_read_bool(dev, "enable-ecc"); + priv->enable_8bit = dev_read_bool(dev, "enable-8bit"); + + priv->reg0 = malloc(88 * sizeof(u32)); + priv->reg350 = malloc(25 * sizeof(u32)); + if (!priv->reg0 || !priv->reg350) + panic("malloc failure\n"); + + /* There may be multiple DDR configurations to try */ + dev_for_each_subnode(subnode, dev) { + ret = ofnode_read_u32(subnode, "size", &priv->ddr_size); + if (ret) { + dev_err(dev, "No size for Cadence DDR\n"); + continue; + } + + ret = ofnode_read_u32_array(subnode, "cadence,ctl-000", priv->reg0, 88); + if (ret) { + dev_err(dev, "No cadence,ctl-000\n"); + continue; + } + + ret = ofnode_read_u32_array(subnode, "cadence,ctl-350", priv->reg350, 25); + if (ret) { + dev_err(dev, "No cadence,ctl-350\n"); + continue; + } + + if (rzn1_dram_init(priv)) + continue; + + if (cadence_ddr_test((long *)RZN1_V_DDR_BASE, priv->ddr_size)) { + gd->ram_base = RZN1_V_DDR_BASE; + gd->ram_size = priv->ddr_size; + break; + } + } + + if (!priv->ddr_size) + panic("No valid DDR to start"); + + free(priv->reg350); + free(priv->reg0); + + return 0; +} + +static const struct udevice_id cadence_ddr_ids[] = { + { .compatible = "cadence,ddr-ctrl" }, + { } +}; + +U_BOOT_DRIVER(cadence_ddr) = { + .name = "cadence_ddr", + .id = UCLASS_RAM, + .of_match = cadence_ddr_ids, + .ops = &cadence_ddr_ops, + .probe = cadence_ddr_probe, + .priv_auto = sizeof(struct cadence_ddr_info), + .flags = DM_FLAG_PRE_RELOC, +}; |