diff options
Diffstat (limited to 'drivers/ram/stm32mp1/stm32mp1_ddr.c')
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 |
1 files changed, 19 insertions, 17 deletions
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index bf3a4c97a4..0457166b12 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -3,6 +3,8 @@ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM + #include <common.h> #include <clk.h> #include <log.h> @@ -311,17 +313,17 @@ static void set_reg(const struct ddr_info *priv, u32 base_addr = get_base_addr(priv, base); const struct reg_desc *desc = ddr_registers[type].desc; - debug("init %s\n", ddr_registers[type].name); + log_debug("init %s\n", ddr_registers[type].name); for (i = 0; i < ddr_registers[type].size; i++) { ptr = (unsigned int *)(base_addr + desc[i].offset); if (desc[i].par_offset == INVALID_OFFSET) { - pr_err("invalid parameter offset for %s", desc[i].name); + log_err("invalid parameter offset for %s", desc[i].name); } else { value = *((u32 *)((u32)param + desc[i].par_offset)); writel(value, ptr); - debug("[0x%x] %s= 0x%08x\n", - (u32)ptr, desc[i].name, value); + log_debug("[0x%x] %s= 0x%08x\n", + (u32)ptr, desc[i].name, value); } } } @@ -564,16 +566,16 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy) DDRPHYC_PGSR_RVERR | DDRPHYC_PGSR_RVEIRR), 1000000); - debug("\n[0x%08x] pgsr = 0x%08x ret=%d\n", - (u32)&phy->pgsr, pgsr, ret); + log_debug("\n[0x%08x] pgsr = 0x%08x ret=%d\n", + (u32)&phy->pgsr, pgsr, ret); } void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) { pir |= DDRPHYC_PIR_INIT; writel(pir, &phy->pir); - debug("[0x%08x] pir = 0x%08x -> 0x%08x\n", - (u32)&phy->pir, pir, readl(&phy->pir)); + log_debug("[0x%08x] pir = 0x%08x -> 0x%08x\n", + (u32)&phy->pir, pir, readl(&phy->pir)); /* need to wait 10 configuration clock before start polling */ udelay(10); @@ -603,7 +605,7 @@ static void wait_sw_done_ack(struct stm32mp1_ddrctl *ctl) panic("Timeout initialising DRAM : DDR->swstat = %x\n", swstat); - debug("[0x%08x] swstat = 0x%08x\n", (u32)&ctl->swstat, swstat); + log_debug("[0x%08x] swstat = 0x%08x\n", (u32)&ctl->swstat, swstat); } /* wait quasi dynamic register update */ @@ -634,7 +636,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode) if (ret) panic("Timeout DRAM : DDR->stat = %x\n", stat); - debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); + log_debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); } void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) @@ -706,9 +708,9 @@ void stm32mp1_ddr_init(struct ddr_info *priv, panic("ddr power init failed\n"); start: - debug("name = %s\n", config->info.name); - debug("speed = %d kHz\n", config->info.speed); - debug("size = 0x%x\n", config->info.size); + log_debug("name = %s\n", config->info.name); + log_debug("speed = %d kHz\n", config->info.speed); + log_debug("size = 0x%x\n", config->info.size); /* * 1. Program the DWC_ddr_umctl2 registers * 1.1 RESETS: presetn, core_ddrc_rstn, aresetn @@ -745,8 +747,8 @@ start: /* 1.5. initialize registers ddr_umctl2 */ /* Stop uMCTL2 before PHY is ready */ clrbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); - debug("[0x%08x] dfimisc = 0x%08x\n", - (u32)&priv->ctl->dfimisc, readl(&priv->ctl->dfimisc)); + log_debug("[0x%08x] dfimisc = 0x%08x\n", + (u32)&priv->ctl->dfimisc, readl(&priv->ctl->dfimisc)); set_reg(priv, REG_REG, &config->c_reg); set_reg(priv, REG_TIMING, &config->c_timing); @@ -809,9 +811,9 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); if (config->p_cal_present) { - debug("DDR DQS training skipped.\n"); + log_debug("DDR DQS training skipped.\n"); } else { - debug("DDR DQS training : "); + log_debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 |