diff options
Diffstat (limited to 'drivers/net/bcm-sf2-eth-gmac.c')
| -rw-r--r-- | drivers/net/bcm-sf2-eth-gmac.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/bcm-sf2-eth-gmac.c b/drivers/net/bcm-sf2-eth-gmac.c index 9ff72fa1ed..a2b594ed73 100644 --- a/drivers/net/bcm-sf2-eth-gmac.c +++ b/drivers/net/bcm-sf2-eth-gmac.c @@ -610,7 +610,7 @@ int gmac_miiphy_read(struct mii_dev *bus, int phyaddr, int devad, int reg) /* Busy wait timeout is 1ms */ if (gmac_mii_busywait(1000)) { - error("%s: Prepare MII read: MII/MDIO busy\n", __func__); + pr_err("%s: Prepare MII read: MII/MDIO busy\n", __func__); return -1; } @@ -622,7 +622,7 @@ int gmac_miiphy_read(struct mii_dev *bus, int phyaddr, int devad, int reg) writel(tmp, GMAC_MII_DATA_ADDR); if (gmac_mii_busywait(1000)) { - error("%s: MII read failure: MII/MDIO busy\n", __func__); + pr_err("%s: MII read failure: MII/MDIO busy\n", __func__); return -1; } @@ -638,7 +638,7 @@ int gmac_miiphy_write(struct mii_dev *bus, int phyaddr, int devad, int reg, /* Busy wait timeout is 1ms */ if (gmac_mii_busywait(1000)) { - error("%s: Prepare MII write: MII/MDIO busy\n", __func__); + pr_err("%s: Prepare MII write: MII/MDIO busy\n", __func__); return -1; } @@ -651,7 +651,7 @@ int gmac_miiphy_write(struct mii_dev *bus, int phyaddr, int devad, int reg, writel(tmp, GMAC_MII_DATA_ADDR); if (gmac_mii_busywait(1000)) { - error("%s: MII write failure: MII/MDIO busy\n", __func__); + pr_err("%s: MII write failure: MII/MDIO busy\n", __func__); return -1; } @@ -742,7 +742,7 @@ int gmac_set_speed(int speed, int duplex) } else if (speed == 10) { speed_cfg = 0; } else { - error("%s: Invalid GMAC speed(%d)!\n", __func__, speed); + pr_err("%s: Invalid GMAC speed(%d)!\n", __func__, speed); return -1; } @@ -820,7 +820,7 @@ int gmac_mac_init(struct eth_device *dev) writel(0, GMAC0_INT_STATUS_ADDR); if (dma_init(dma) < 0) { - error("%s: GMAC dma_init failed\n", __func__); + pr_err("%s: GMAC dma_init failed\n", __func__); goto err_exit; } @@ -855,7 +855,7 @@ int gmac_mac_init(struct eth_device *dev) writel(tmp, GMAC_MII_CTRL_ADDR); if (gmac_mii_busywait(1000)) { - error("%s: Configure MDIO: MII/MDIO busy\n", __func__); + pr_err("%s: Configure MDIO: MII/MDIO busy\n", __func__); goto err_exit; } |