diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/remoteproc/ti,k3-r5f-rproc.txt | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/doc/device-tree-bindings/remoteproc/ti,k3-r5f-rproc.txt b/doc/device-tree-bindings/remoteproc/ti,k3-r5f-rproc.txt index 5708c23017..25ee495fe6 100644 --- a/doc/device-tree-bindings/remoteproc/ti,k3-r5f-rproc.txt +++ b/doc/device-tree-bindings/remoteproc/ti,k3-r5f-rproc.txt @@ -38,7 +38,7 @@ The following are the mandatory properties: Optional properties: -------------------- -- lockstep-mode: Configuration Mode for the Dual R5F cores within the R5F +- ti,cluster-mode: Configuration Mode for the Dual R5F cores within the R5F cluster. Should be either a value of 1 (LockStep mode) or 0 (Split mode), default is LockStep mode if omitted. @@ -88,15 +88,15 @@ Optional properties: -------------------- The following properties are optional properties for each of the R5F cores: -- atcm-enable: R5F core configuration mode dictating if ATCM should be +- ti,atcm-enable: R5F core configuration mode dictating if ATCM should be enabled. Should be either a value of 1 (enabled) or 0 (disabled), default is disabled if omitted. R5F view - of ATCM dictated by loczrama property. -- btcm-enable: R5F core configuration mode dictating if BTCM should be + of ATCM dictated by ti,loczrama property. +- ti,btcm-enable: R5F core configuration mode dictating if BTCM should be enabled. Should be either a value of 1 (enabled) or 0 (disabled), default is enabled if omitted. R5F view - of BTCM dictated by loczrama property. -- loczrama: R5F core configuration mode dictating which TCM should + of BTCM dictated by ti,loczrama property. +- ti,loczrama: R5F core configuration mode dictating which TCM should appear at address 0 (from core's view). Should be either a value of 1 (ATCM at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted. @@ -129,7 +129,7 @@ Example: mcu_r5fss0: r5fss@41000000 { compatible = "ti,am654-r5fss"; power-domains = <&k3_pds 129>; - lockstep-mode = <1>; + ti,cluster-mode = <1>; #address-cells = <1>; #size-cells = <1>; ranges = <0x41000000 0x00 0x41000000 0x20000>, @@ -144,9 +144,9 @@ Example: ti,sci-dev-id = <159>; ti,sci-proc-ids = <0x01 0xFF>; resets = <&k3_reset 159 1>; - atcm-enable = <1>; - btcm-enable = <1>; - loczrama = <1>; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; }; mcu_r5f1: r5f@41400000 { @@ -158,9 +158,9 @@ Example: ti,sci-dev-id = <245>; ti,sci-proc-ids = <0x02 0xFF>; resets = <&k3_reset 245 1>; - atcm-enable = <1>; - btcm-enable = <1>; - loczrama = <1>; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; }; }; }; |