1 files changed, 0 insertions, 37 deletions
diff --git a/doc/README.x86 b/doc/README.x86
index 8e0a3f36ed..8077ff37ee 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -203,43 +203,6 @@ Flash map for samus / broadwell:
 
 ---
 
-Intel Crown Bay specific instructions for bare mode:
-
-U-Boot support of Intel Crown Bay board [4] relies on a binary blob called
-Firmware Support Package [5] to perform all the necessary initialization steps
-as documented in the BIOS Writer Guide, including initialization of the CPU,
-memory controller, chipset and certain bus interfaces.
-
-Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T,
-install it on your host and locate the FSP binary blob. Note this platform
-also requires a Chipset Micro Code (CMC) state machine binary to be present in
-the SPI flash where u-boot.rom resides, and this CMC binary blob can be found
-in this FSP package too.
-
-* ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd
-* ./Microcode/C0_22211.BIN
-
-Rename the first one to fsp.bin and second one to cmc.bin and put them in the
-board directory.
-
-Note the FSP release version 001 has a bug which could cause random endless
-loop during the FspInit call. This bug was published by Intel although Intel
-did not describe any details. We need manually apply the patch to the FSP
-binary using any hex editor (eg: bvi). Go to the offset 0x1fcd8 of the FSP
-binary, change the following five bytes values from orginally E8 42 FF FF FF
-to B8 00 80 0B 00.
-
-As for the video ROM, you need manually extract it from the Intel provided
-BIOS for Crown Bay here [6], using the AMI MMTool [7]. Check PCI option ROM
-ID 8086:4108, extract and save it as vga.bin in the board directory.
-
-Now you can build U-Boot and obtain u-boot.rom
-
-$ make crownbay_defconfig
-$ make all
-
----
-
 Intel Cougar Canyon 2 specific instructions for bare mode:
 
 This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors