diff options
Diffstat (limited to 'board/ti')
48 files changed, 673 insertions, 795 deletions
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index 67a87a1aaf..3dbeedab1a 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -3,22 +3,14 @@ # # Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed "as is" WITHOUT ANY WARRANTY of any -# kind, whether express or implied; without even the implied warranty -# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -ifdef CONFIG_SPL_BUILD +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y) COBJS := mux.o endif diff --git a/board/ti/am335x/README b/board/ti/am335x/README new file mode 100644 index 0000000000..67b524673a --- /dev/null +++ b/board/ti/am335x/README @@ -0,0 +1,160 @@ +Summary +======= + +This document covers various features of the 'am335x_evm' build, and some of +the related build targets (am335x_evm_uartN, etc). + +Hardware +======== + +The binary produced by this board supports, based on parsing of the EEPROM +documented in TI's reference designs: +- AM335x GP EVM +- AM335x EVM SK +- Beaglebone White +- Beaglebone Black +' +NAND +==== + +The AM335x GP EVM ships with a 256MiB NAND available in most profiles. In +this example to program the NAND we assume that an SD card has been +inserted with the files to write in the first SD slot and that mtdparts +have been configured correctly for the board. As a time saving measure we +load MLO into memory in one location, copy it into the three locatations +that the ROM checks for additional valid copies, then load U-Boot into +memory. We then write that whole section of memory to NAND. + +U-Boot # mmc rescan +U-Boot # env default -f -a +U-Boot # nand erase.chip +U-Boot # saveenv +U-Boot # load mmc 0 81000000 MLO +U-Boot # cp.b 81000000 81020000 20000 +U-Boot # cp.b 81000000 81040000 20000 +U-Boot # cp.b 81000000 81060000 20000 +U-Boot # load mmc 0 81080000 u-boot.img +U-Boot # nand write 81000000 0 260000 +U-Boot # load mmc 0 ${loadaddr} uImage +U-Boot # nand write ${loadaddr} kernel 500000 + +NOR +=== + +The Beaglebone White can be equiped with a "memory cape" that in turn can +have a NOR module plugged into it. In this case it is then possible to +program and boot from NOR. Note that due to how U-Boot is architectured we +must build a specific version of U-Boot that knows we have NOR flash. This +build is named 'am335x_evm_nor'. Further, we have a 'am335x_evm_norboot' +build that will assume that the environment is on NOR rather than NAND. In +the following example we assume that and SD card has been populated with +MLO and u-boot.img from a 'am335x_evm_nor' build and also contains the +'u-boot.bin' from a 'am335x_evm_norboot' build. When booting from NOR, a +binary must be written to the start of NOR, with no header or similar +prepended. In the following example we use a size of 512KiB (0x80000) +as that is how much space we set aside before the environment, as per +the config file. + +U-Boot # mmc rescan +U-Boot # load mmc 0 ${loadaddr} u-boot.bin +U-Boot # protect off 08000000 +80000 +U-Boot # erase 08000000 +80000 +U-Boot # cp.b ${loadaddr} 08000000 ${filesize} + +Falcon Mode +=========== + +The default build includes "Falcon Mode" (see doc/README.falcon) via NAND, +eMMC (or raw SD cards) and FAT SD cards. Our default behavior currently is +to read a 'c' on the console while in SPL at any point prior to loading the +OS payload (so as soon as possible) to opt to booting full U-Boot. Also +note that while one can program Falcon Mode "in place" great care needs to +be taken by the user to not 'brick' their setup. As these are all eval +boards with multiple boot methods, recovery should not be an issue in this +worst-case however. + +Falcon Mode: eMMC +================= + +The recommended layout in this case is: + +MMC BLOCKS |--------------------------------| LOCATION IN BYTES +0x0000 - 0x007F : MBR or GPT table : 0x000000 - 0x020000 +0x0080 - 0x00FF : ARGS or FDT file : 0x010000 - 0x020000 +0x0100 - 0x01FF : SPL.backup1 (first copy used) : 0x020000 - 0x040000 +0x0200 - 0x02FF : SPL.backup2 (second copy used) : 0x040000 - 0x060000 +0x0300 - 0x06FF : U-Boot : 0x060000 - 0x0e0000 +0x0700 - 0x08FF : U-Boot Env + Redundant : 0x0e0000 - 0x120000 +0x0900 - 0x28FF : Kernel : 0x120000 - 0x520000 + +Note that when we run 'spl export' it will prepare to boot the kernel. +This includes relocation of the uImage from where we loaded it to the entry +point defined in the header. As these locations overlap by default, it +would leave us with an image that if written to MMC will not boot, so +instead of using the loadaddr variable we use 0x81000000 in the following +example. In this example we are loading from the network, for simplicity, +and assume a valid partition table already exists and 'mmc dev' has already +been run to select the correct device. Also note that if you previously +had a FAT partition (such as on a Beaglebone Black) it is not enough to +write garbage into the area, you must delete it from the partition table +first. + +# Ensure we are able to talk with this mmc device +U-Boot # mmc rescan +U-Boot # tftp 81000000 am335x/MLO +# Write to two of the backup locations ROM uses +U-Boot # mmc write 81000000 100 100 +U-Boot # mmc write 81000000 200 100 +# Write U-Boot to the location set in the config +U-Boot # tftp 81000000 am335x/u-boot.img +U-Boot # mmc write 81000000 300 400 +# Load kernel and device tree into memory, perform export +U-Boot # tftp 81000000 am335x/uImage +U-Boot # run findfdt +U-Boot # tftp ${fdtaddr} am335x/${fdtfile} +U-Boot # run mmcargs +U-Boot # spl export fdt 81000000 - ${fdtaddr} +# Write the updated device tree to MMC +U-Boot # mmc write ${fdtaddr} 80 80 +# Write the uImage to MMC +U-Boot # mmc write 81000000 900 2000 + +Falcon Mode: FAT SD cards +========================= + +In this case the additional file is written to the filesystem. In this +example we assume that the uImage and device tree to be used are already on +the FAT filesystem (only the uImage MUST be for this to function +afterwards) along with a Falcon Mode aware MLO and the FAT partition has +already been created and marked bootable: + +U-Boot # mmc rescan +# Load kernel and device tree into memory, perform export +U-Boot # load mmc 0:1 ${loadaddr} uImage +U-Boot # run findfdt +U-Boot # load mmc 0:1 ${fdtaddr} ${fdtfile} +U-Boot # run mmcargs +U-Boot # spl export fdt ${loadaddr} - ${fdtaddr} + +This will print a number of lines and then end with something like: + Using Device Tree in place at 80f80000, end 80f85928 + Using Device Tree in place at 80f80000, end 80f88928 +So then you: + +U-Boot # fatwrite mmc 0:1 0x80f80000 args 8928 + +Falcon Mode: NAND +================= + +In this case the additional data is written to another partition of the +NAND. In this example we assume that the uImage and device tree to be are +already located on the NAND somewhere (such as fileystem or mtd partition) +along with a Falcon Mode aware MLO written to the correct locations for +booting and mtdparts have been configured correctly for the board: + +U-Boot # nand read ${loadaddr} kernel +U-Boot # load nand rootfs ${fdtaddr} /boot/am335x-evm.dtb +U-Boot # run nandargs +U-Boot # spl export fdt ${loadaddr} - ${fdtaddr} +U-Boot # nand erase.part u-boot-spl-os +U-Boot # nand write ${fdtaddr} u-boot-spl-os diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index fdbe26cde1..728afc2ba3 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -5,15 +5,7 @@ * * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -27,6 +19,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> #include <asm/io.h> #include <asm/emif.h> #include <asm/gpio.h> @@ -48,43 +41,10 @@ static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; -static struct am335x_baseboard_id __attribute__((section (".data"))) header; - -static inline int board_is_bone(void) -{ - return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); -} - -static inline int board_is_bone_lt(void) -{ - return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN); -} - -static inline int board_is_evm_sk(void) -{ - return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); -} - -static inline int board_is_idk(void) -{ - return !strncmp(header.config, "SKU#02", 6); -} - -static int __maybe_unused board_is_gp_evm(void) -{ - return !strncmp("A33515BB", header.name, 8); -} - -int board_is_evm_15_or_later(void) -{ - return (!strncmp("A33515BB", header.name, 8) && - strncmp("1.5", header.version, 3) <= 0); -} - /* * Read header information from EEPROM into global structure. */ -static int read_eeprom(void) +static int read_eeprom(struct am335x_baseboard_id *header) { /* Check if baseboard eeprom is available */ if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { @@ -94,28 +54,28 @@ static int read_eeprom(void) } /* read the eeprom using i2c */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, - sizeof(header))) { + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header, + sizeof(struct am335x_baseboard_id))) { puts("Could not read the EEPROM; something fundamentally" " wrong on the I2C bus.\n"); return -EIO; } - if (header.magic != 0xEE3355AA) { + if (header->magic != 0xEE3355AA) { /* * read the eeprom using i2c again, * but use only a 1 byte address */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, - (uchar *)&header, sizeof(header))) { + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header, + sizeof(struct am335x_baseboard_id))) { puts("Could not read the EEPROM; something " "fundamentally wrong on the I2C bus.\n"); return -EIO; } - if (header.magic != 0xEE3355AA) { + if (header->magic != 0xEE3355AA) { printf("Incorrect magic number (0x%x) in EEPROM\n", - header.magic); + header->magic); return -EINVAL; } } @@ -123,7 +83,7 @@ static int read_eeprom(void) return 0; } -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) static const struct ddr_data ddr2_data = { .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | (MT47H128M16RT25E_RD_DQS<<20) | @@ -289,12 +249,32 @@ int spl_start_uboot(void) */ void s_init(void) { + __maybe_unused struct am335x_baseboard_id header; + + /* + * The ROM will only have set up sufficient pinmux to allow for the + * first 4KiB NOR to be read, we must finish doing what we know of + * the NOR mux in this space in order to continue. + */ +#ifdef CONFIG_NOR_BOOT + asm("stmfd sp!, {r2 - r4}"); + asm("movw r4, #0x8A4"); + asm("movw r3, #0x44E1"); + asm("orr r4, r4, r3, lsl #16"); + asm("mov r2, #9"); + asm("mov r3, #8"); + asm("gpmc_mux: str r2, [r4], #4"); + asm("subs r3, r3, #1"); + asm("bne gpmc_mux"); + asm("ldmfd sp!, {r2 - r4}"); +#endif + +#ifdef CONFIG_SPL_BUILD /* * Save the boot parameters passed from romcode. * We cannot delay the saving further than this, * to prevent overwrites. */ -#ifdef CONFIG_SPL_BUILD save_omap_boot_params(); #endif @@ -308,7 +288,7 @@ void s_init(void) while (readl(&wdtimer->wdtwwps) != 0x0) ; -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) /* Setup the PLLs and the clocks for the peripherals */ pll_init(); @@ -336,18 +316,25 @@ void s_init(void) uart_soft_reset(); +#if defined(CONFIG_NOR_BOOT) + /* We want our console now. */ + gd->baudrate = CONFIG_BAUDRATE; + serial_init(); + gd->have_console = 1; +#else gd = &gdata; preloader_console_init(); +#endif /* Initalize the board header */ enable_i2c0_pin_mux(); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) + if (read_eeprom(&header) < 0) puts("Could not get board ID.\n"); enable_board_pin_mux(&header); - if (board_is_evm_sk()) { + if (board_is_evm_sk(&header)) { /* * EVM SK 1.2A and later use gpio0_7 to enable DDR3. * This is safe enough to do on older revs. @@ -356,15 +343,15 @@ void s_init(void) gpio_direction_output(GPIO_DDR_VTT_EN, 1); } - if (board_is_evm_sk()) + if (board_is_evm_sk(&header)) config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); - else if (board_is_bone_lt()) + else if (board_is_bone_lt(&header)) config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_beagleblack_data, &ddr3_beagleblack_cmd_ctrl_data, &ddr3_beagleblack_emif_reg_data, 0); - else if (board_is_evm_15_or_later()) + else if (board_is_evm_15_or_later(&header)) config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data, &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0); else @@ -378,14 +365,22 @@ void s_init(void) */ int board_init(void) { - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) - puts("Could not get board ID.\n"); +#ifdef CONFIG_NOR + const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, + STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4, + STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 }; +#endif gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; gpmc_init(); +#ifdef CONFIG_NOR + /* Reconfigure CS0 for NOR instead of NAND. */ + enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0], + CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M); +#endif + return 0; } @@ -394,6 +389,10 @@ int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG char safe_string[HDR_NAME_LEN + 1]; + struct am335x_baseboard_id header; + + if (read_eeprom(&header) < 0) + puts("Could not get board ID.\n"); /* Now set variables based on the header. */ strncpy(safe_string, (char *)header.name, sizeof(header.name)); @@ -443,6 +442,7 @@ static struct cpsw_platform_data cpsw_data = { .ale_entries = 1024, .host_port_reg_ofs = 0x108, .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, .mac_control = (1 << 5), .control = cpsw_control, .host_port_num = 0, @@ -457,6 +457,7 @@ int board_eth_init(bd_t *bis) int rv, n = 0; uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; + __maybe_unused struct am335x_baseboard_id header; /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); @@ -478,7 +479,11 @@ int board_eth_init(bd_t *bis) } #ifdef CONFIG_DRIVER_TI_CPSW - if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { + if (read_eeprom(&header) < 0) + puts("Could not get board ID.\n"); + + if (board_is_bone(&header) || board_is_bone_lt(&header) || + board_is_idk(&header)) { writel(MII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; @@ -507,7 +512,7 @@ int board_eth_init(bd_t *bis) #define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 #define AR8051_RGMII_TX_CLK_DLY 0x100 - if (board_is_evm_sk() || board_is_gp_evm()) { + if (board_is_evm_sk(&header) || board_is_gp_evm(&header)) { const char *devname; devname = miiphy_get_current_dev(); diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h index 48e112e230..bc700d56fe 100644 --- a/board/ti/am335x/board.h +++ b/board/ti/am335x/board.h @@ -5,15 +5,7 @@ * * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _BOARD_H_ @@ -37,6 +29,37 @@ struct am335x_baseboard_id { char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; }; +static inline int board_is_bone(struct am335x_baseboard_id *header) +{ + return !strncmp(header->name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_bone_lt(struct am335x_baseboard_id *header) +{ + return !strncmp(header->name, "A335BNLT", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(struct am335x_baseboard_id *header) +{ + return !strncmp("A335X_SK", header->name, HDR_NAME_LEN); +} + +static inline int board_is_idk(struct am335x_baseboard_id *header) +{ + return !strncmp(header->config, "SKU#02", 6); +} + +static inline int board_is_gp_evm(struct am335x_baseboard_id *header) +{ + return !strncmp("A33515BB", header->name, HDR_NAME_LEN); +} + +static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header) +{ + return (board_is_gp_evm(header) && + strncmp("1.5", header->version, 3) <= 0); +} + /* * We have three pin mux functions that must exist. We must be able to enable * uart0, for initial output and i2c0 to read the main EEPROM. We then have a diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 02837082cb..5b7ed6383b 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -190,6 +190,56 @@ static struct module_pin_mux nand_pin_mux[] = { {-1}, }; +#if defined(CONFIG_NOR) && !defined(CONFIG_NOR_BOOT) +static struct module_pin_mux bone_norcape_pin_mux[] = { + {OFFSET(lcd_data0), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A0 */ + {OFFSET(lcd_data1), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A1 */ + {OFFSET(lcd_data2), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A2 */ + {OFFSET(lcd_data3), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A3 */ + {OFFSET(lcd_data4), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A4 */ + {OFFSET(lcd_data5), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A5 */ + {OFFSET(lcd_data6), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A6 */ + {OFFSET(lcd_data7), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A7 */ + {OFFSET(lcd_vsync), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A8 */ + {OFFSET(lcd_hsync), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A9 */ + {OFFSET(lcd_pclk), MODE(1)| PULLUDEN | RXACTIVE}, /* NOR_A10 */ + {OFFSET(lcd_ac_bias_en), MODE(1)| PULLUDEN | RXACTIVE}, /* NOR_A11 */ + {OFFSET(lcd_data8), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A12 */ + {OFFSET(lcd_data9), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A13 */ + {OFFSET(lcd_data10), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A14 */ + {OFFSET(lcd_data11), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A15 */ + {OFFSET(lcd_data12), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A16 */ + {OFFSET(lcd_data13), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A17 */ + {OFFSET(lcd_data14), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A18 */ + {OFFSET(lcd_data15), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A19 */ + {OFFSET(gpmc_ad0), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD0 */ + {OFFSET(gpmc_ad1), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD1 */ + {OFFSET(gpmc_ad2), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD2 */ + {OFFSET(gpmc_ad3), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD3 */ + {OFFSET(gpmc_ad4), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD4 */ + {OFFSET(gpmc_ad5), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD5 */ + {OFFSET(gpmc_ad6), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD6 */ + {OFFSET(gpmc_ad7), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD7 */ + {OFFSET(gpmc_ad8), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD8 */ + {OFFSET(gpmc_ad9), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD9 */ + {OFFSET(gpmc_ad10), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD10 */ + {OFFSET(gpmc_ad11), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD11 */ + {OFFSET(gpmc_ad12), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD12 */ + {OFFSET(gpmc_ad13), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD13 */ + {OFFSET(gpmc_ad14), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD14 */ + {OFFSET(gpmc_ad15), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD15 */ + + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN) | RXACTIVE}, /* NOR_CE */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN) | RXACTIVE}, /* NOR_ADVN_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN | RXACTIVE)},/* NOR_OE */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN | RXACTIVE)},/* NOR_BE0N_CLE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN | RXACTIVE)}, /* NOR_WEN */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUDEN)}, /* NOR WAIT */ + {-1}, +}; +#endif + + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -262,13 +312,18 @@ static unsigned short detect_daughter_board_profile(void) void enable_board_pin_mux(struct am335x_baseboard_id *header) { /* Do board-specific muxes. */ - if (!strncmp(header->name, "A335BONE", HDR_NAME_LEN)) { + if (board_is_bone(header)) { /* Beaglebone pinmux */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); +#ifndef CONFIG_NOR configure_module_pin_mux(mmc1_pin_mux); - } else if (!strncmp(header->config, "SKU#01", 6)) { +#endif +#if defined(CONFIG_NOR) && !defined(CONFIG_NOR_BOOT) + configure_module_pin_mux(bone_norcape_pin_mux); +#endif + } else if (board_is_gp_evm(header)) { /* General Purpose EVM */ unsigned short profile = detect_daughter_board_profile(); configure_module_pin_mux(rgmii1_pin_mux); @@ -283,7 +338,7 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } - } else if (!strncmp(header->config, "SKU#02", 6)) { + } else if (board_is_idk(header)) { /* * Industrial Motor Control (IDK) * note: IDK console is on UART3 by default. @@ -292,13 +347,13 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) */ configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_no_cd_pin_mux); - } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { + } else if (board_is_evm_sk(header)) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux_sk_evm); - } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) { + } else if (board_is_bone_lt(header)) { /* Beaglebone LT pinmux */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(mii1_pin_mux); diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds new file mode 100644 index 0000000000..a173f620ef --- /dev/null +++ b/board/ti/am335x/u-boot.lds @@ -0,0 +1,117 @@ +/* + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.__image_copy_start) + CPUDIR/start.o (.text*) + board/ti/am335x/libam335x.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + + . = .; + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + . = ALIGN(4); + + .image_copy_end : + { + *(.__image_copy_end) + } + + .rel_dyn_start : + { + *(.__rel_dyn_start) + } + + .rel.dyn : { + *(.rel*) + } + + .rel_dyn_end : + { + *(.__rel_dyn_end) + } + + _end = .; + + /* + * Deprecated: this MMU section is used by pxa at present but + * should not be used by new boards/CPUs. + */ + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + +/* + * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c + * __bss_base and __bss_limit are for linker only (overlay ordering) + */ + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + __bss_base = .; + } + + .bss __bss_base (OVERLAY) : { + *(.bss*) + . = ALIGN(4); + __bss_limit = .; + } + + .bss_end __bss_limit (OVERLAY) : { + KEEP(*(.__bss_end)); + } + + /DISCARD/ : { *(.dynsym) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} diff --git a/board/ti/am3517crane/Makefile b/board/ti/am3517crane/Makefile index 59a92106fc..d9ab72a620 100644 --- a/board/ti/am3517crane/Makefile +++ b/board/ti/am3517crane/Makefile @@ -5,19 +5,7 @@ # # Copyright (C) 2011 Mistral Solutions Pvt Ltd # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c index 0b94245e02..5eb97ff378 100644 --- a/board/ti/am3517crane/am3517crane.c +++ b/board/ti/am3517crane/am3517crane.c @@ -7,19 +7,7 @@ * * Copyright (C) 2011 Mistral Solutions Pvt Ltd * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/board/ti/am3517crane/am3517crane.h b/board/ti/am3517crane/am3517crane.h index 71335a3fc5..e131c8fb99 100644 --- a/board/ti/am3517crane/am3517crane.h +++ b/board/ti/am3517crane/am3517crane.h @@ -7,19 +7,7 @@ * * Copyright (C) 2011 Mistral Solutions Pvt Ltd * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _AM3517CRANE_H_ diff --git a/board/ti/beagle/Makefile b/board/ti/beagle/Makefile index a07cb25feb..3018f6c63a 100644 --- a/board/ti/beagle/Makefile +++ b/board/ti/beagle/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index c686f40a93..62e9beaef3 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -11,23 +11,7 @@ * Syed Mohammed Khasim <khasim@ti.com> * * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #ifdef CONFIG_STATUS_LED @@ -182,8 +166,7 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; break; } - case REVISION_XM_A: - case REVISION_XM_B: + case REVISION_XM_AB: case REVISION_XM_C: if (pop_mfr == 0) { /* 256MB DDR */ @@ -256,8 +239,7 @@ static void beagle_display_init(void) case REVISION_C4: omap3_dss_panel_config(&dvid_cfg); break; - case REVISION_XM_A: - case REVISION_XM_B: + case REVISION_XM_AB: case REVISION_XM_C: default: omap3_dss_panel_config(&dvid_cfg_xm); @@ -276,12 +258,11 @@ static void beagle_dvi_pup(void) case REVISION_AXBX: case REVISION_CX: case REVISION_C4: - case REVISION_XM_A: gpio_request(170, ""); gpio_direction_output(170, 0); gpio_set_value(170, 1); break; - case REVISION_XM_B: + case REVISION_XM_AB: case REVISION_XM_C: default: #define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3) @@ -359,19 +340,9 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break; - case REVISION_XM_A: - printf("Beagle xM Rev A\n"); - setenv("beaglerev", "xMA"); - MUX_BEAGLE_XM(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); - break; - case REVISION_XM_B: - printf("Beagle xM Rev B\n"); - setenv("beaglerev", "xMB"); + case REVISION_XM_AB: + printf("Beagle xM Rev A/B\n"); + setenv("beaglerev", "xMAB"); MUX_BEAGLE_XM(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -484,8 +455,7 @@ int misc_init_r(void) twl4030_power_init(); switch (get_board_revision()) { - case REVISION_XM_A: - case REVISION_XM_B: + case REVISION_XM_AB: twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); break; default: diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index 6d71bbc79d..6dd2ffe558 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -2,23 +2,7 @@ * (C) Copyright 2008 * Dirk Behme <dirk.behme@gmail.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _BEAGLE_H_ #define _BEAGLE_H_ @@ -39,8 +23,7 @@ const omap3_sysinfo sysinfo = { #define REVISION_AXBX 0x7 #define REVISION_CX 0x6 #define REVISION_C4 0x5 -#define REVISION_XM_A 0x0 -#define REVISION_XM_B 0x1 +#define REVISION_XM_AB 0x0 #define REVISION_XM_C 0x2 /* diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c index ac21a95732..89b8dd3c3c 100644 --- a/board/ti/beagle/led.c +++ b/board/ti/beagle/led.c @@ -2,20 +2,7 @@ * Copyright (c) 2010 Texas Instruments, Inc. * Jason Kridner <jkridner@beagleboard.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <status_led.h> diff --git a/board/ti/dra7xx/Makefile b/board/ti/dra7xx/Makefile index db6da5ba21..e558f4c89f 100644 --- a/board/ti/dra7xx/Makefile +++ b/board/ti/dra7xx/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2013 # Texas Instruments, <www.ti.com> # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index bf7e091966..9a114e2a75 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -8,23 +8,7 @@ * Aneesh V <aneesh@ti.com> * Steve Sakoman <steve@sakoman.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <palmas.h> @@ -39,12 +23,53 @@ #include <asm/ehci-omap.h> #endif +#ifdef CONFIG_DRIVER_TI_CPSW +#include <cpsw.h> +#endif + DECLARE_GLOBAL_DATA_PTR; const struct omap_sysinfo sysinfo = { "Board: DRA7xx\n" }; +/* + * Adjust I/O delays on the Tx control and data lines of each MAC port. This + * is a workaround in order to work properly with the DP83865 PHYs on the EVM. + * In 3COM RGMII mode this PHY applies it's own internal clock delay, so we + * essentially need to counteract the DRA7xx internal delay, and we do this + * by delaying the control and data lines. If not using this PHY, you probably + * don't need to do this stuff! + */ +static void dra7xx_adj_io_delay(const struct io_delay *io_dly) +{ + int i = 0; + u32 reg_val; + u32 delta; + u32 coarse; + u32 fine; + + writel(CFG_IO_DELAY_UNLOCK_KEY, CFG_IO_DELAY_LOCK); + + while(io_dly[i].addr) { + writel(CFG_IO_DELAY_ACCESS_PATTERN & ~CFG_IO_DELAY_LOCK_MASK, + io_dly[i].addr); + delta = io_dly[i].dly; + reg_val = readl(io_dly[i].addr) & 0x3ff; + coarse = ((reg_val >> 5) & 0x1F) + ((delta >> 5) & 0x1F); + coarse = (coarse > 0x1F) ? (0x1F) : (coarse); + fine = (reg_val & 0x1F) + (delta & 0x1F); + fine = (fine > 0x1F) ? (0x1F) : (fine); + reg_val = CFG_IO_DELAY_ACCESS_PATTERN | + CFG_IO_DELAY_LOCK_MASK | + ((coarse << 5) | (fine)); + writel(reg_val, io_dly[i].addr); + i++; + } + + writel(CFG_IO_DELAY_LOCK_KEY, CFG_IO_DELAY_LOCK); +} + /** * @brief board_init * @@ -58,11 +83,6 @@ int board_init(void) return 0; } -int board_eth_init(bd_t *bis) -{ - return 0; -} - /** * @brief misc_init_r - Configure EVM board specific configurations * such as power configurations, ethernet initialization as phase2 of @@ -101,3 +121,107 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +#ifdef CONFIG_DRIVER_TI_CPSW + +/* Delay value to add to calibrated value */ +#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8) +#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8) +#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2) +#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0) +#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0) +#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8) +#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8) +#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2) +#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) +#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0) + +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + int ret; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + uint32_t ctrl_val; + const struct io_delay io_dly[] = { + {CFG_RGMII0_TXCTL, RGMII0_TXCTL_DLY_VAL}, + {CFG_RGMII0_TXD0, RGMII0_TXD0_DLY_VAL}, + {CFG_RGMII0_TXD1, RGMII0_TXD1_DLY_VAL}, + {CFG_RGMII0_TXD2, RGMII0_TXD2_DLY_VAL}, + {CFG_RGMII0_TXD3, RGMII0_TXD3_DLY_VAL}, + {CFG_VIN2A_D13, VIN2A_D13_DLY_VAL}, + {CFG_VIN2A_D17, VIN2A_D17_DLY_VAL}, + {CFG_VIN2A_D16, VIN2A_D16_DLY_VAL}, + {CFG_VIN2A_D15, VIN2A_D15_DLY_VAL}, + {CFG_VIN2A_D14, VIN2A_D14_DLY_VAL}, + {0} + }; + + /* Adjust IO delay for RGMII tx path */ + dra7xx_adj_io_delay(io_dly); + + /* try reading mac address from efuse */ + mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); + mac_hi = readl((*ctrl)->control_core_mac_id_0_hi); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = mac_lo & 0xFF; + mac_addr[4] = (mac_lo & 0xFF00) >> 8; + mac_addr[5] = (mac_lo & 0xFF0000) >> 16; + + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC\n"); + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); + ctrl_val |= 0x22; + writel(ctrl_val, (*ctrl)->control_core_control_io1); + + ret = cpsw_register(&cpsw_data); + if (ret < 0) + printf("Error %d registering CPSW switch\n", ret); + + return ret; +} +#endif diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 338a241ce7..0a86594c6b 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -5,23 +5,7 @@ * Sricharan R <r.sricharan@ti.com> * Nishant Kamat <nskamat@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _MUX_DATA_DRA7XX_H_ #define _MUX_DATA_DRA7XX_H_ @@ -53,5 +37,19 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {UART1_RTSN, (IEN | PTU | PDIS | M3)}, /* UART1_RTSN */ {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */ {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */ + {MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */ + {MDIO_D, (IEN | PTU | PEN | M0)}, /* MDIO_D */ + {RGMII0_TXC, (M0) }, + {RGMII0_TXCTL, (M0) }, + {RGMII0_TXD3, (M0) }, + {RGMII0_TXD2, (M0) }, + {RGMII0_TXD1, (M0) }, + {RGMII0_TXD0, (M0) }, + {RGMII0_RXC, (IEN | M0) }, + {RGMII0_RXCTL, (IEN | M0) }, + {RGMII0_RXD3, (IEN | M0) }, + {RGMII0_RXD2, (IEN | M0) }, + {RGMII0_RXD1, (IEN | M0) }, + {RGMII0_RXD0, (IEN | M0) }, }; #endif /* _MUX_DATA_DRA7XX_H_ */ diff --git a/board/ti/evm/Makefile b/board/ti/evm/Makefile index 229214f764..0f8cf446ba 100644 --- a/board/ti/evm/Makefile +++ b/board/ti/evm/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 3c2dcab68c..c71c218529 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -9,23 +9,7 @@ * Richard Woodruff <r-woodruff2@ti.com> * Syed Mohammed Khasim <khasim@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <netdev.h> diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h index 623cf1bb18..f50193d99a 100644 --- a/board/ti/evm/evm.h +++ b/board/ti/evm/evm.h @@ -2,23 +2,7 @@ * (C) Copyright 2008 * Nishanth Menon <menon.nishanth@gmail.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _EVM_H_ #define _EVM_H_ diff --git a/board/ti/omap1510inn/Makefile b/board/ti/omap1510inn/Makefile index 00de43947d..ad5a7eb94e 100644 --- a/board/ti/omap1510inn/Makefile +++ b/board/ti/omap1510inn/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/omap1510inn/lowlevel_init.S b/board/ti/omap1510inn/lowlevel_init.S index 0e01841229..4d3ec39a65 100644 --- a/board/ti/omap1510inn/lowlevel_init.S +++ b/board/ti/omap1510inn/lowlevel_init.S @@ -7,23 +7,7 @@ * -- Some bits of code used from rrload's head_OMAP1510.s -- * Copyright (C) 2002 RidgeRun, Inc. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <config.h> diff --git a/board/ti/omap1510inn/omap1510innovator.c b/board/ti/omap1510inn/omap1510innovator.c index 2cb6062228..a2a33a050b 100644 --- a/board/ti/omap1510inn/omap1510innovator.c +++ b/board/ti/omap1510inn/omap1510innovator.c @@ -10,23 +10,7 @@ * Texas Instruments, <www.ti.com> * Kshitij Gupta <Kshitij@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/board/ti/omap5912osk/Makefile b/board/ti/omap5912osk/Makefile index c5520cb4b7..b2727de687 100644 --- a/board/ti/omap5912osk/Makefile +++ b/board/ti/omap5912osk/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S index ca7361e05a..cad0a5acd8 100644 --- a/board/ti/omap5912osk/lowlevel_init.S +++ b/board/ti/omap5912osk/lowlevel_init.S @@ -8,23 +8,7 @@ * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 * * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004 - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <config.h> diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c index 95140719aa..e402649132 100644 --- a/board/ti/omap5912osk/omap5912osk.c +++ b/board/ti/omap5912osk/omap5912osk.c @@ -14,23 +14,7 @@ * Texas Instruments, <www.ti.com> * Rishi Bhattacharya <rishi@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/board/ti/omap5_uevm/Makefile b/board/ti/omap5_uevm/Makefile index fa81d64bee..2ab40e3ecf 100644 --- a/board/ti/omap5_uevm/Makefile +++ b/board/ti/omap5_uevm/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 90046e896e..2c00648470 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -4,28 +4,13 @@ * Aneesh V <aneesh@ti.com> * Steve Sakoman <steve@sakoman.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <palmas.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> +#include <tca642x.h> #include "mux_data.h" @@ -36,6 +21,25 @@ const struct omap_sysinfo sysinfo = { }; /** + * @brief tca642x_init - uEVM default values for the GPIO expander + * input reg, output reg, polarity reg, configuration reg + */ +struct tca642x_bank_info tca642x_init[] = { + { .input_reg = 0x00, + .output_reg = 0x04, + .polarity_reg = 0x00, + .configuration_reg = 0x80 }, + { .input_reg = 0x00, + .output_reg = 0x00, + .polarity_reg = 0x00, + .configuration_reg = 0xff }, + { .input_reg = 0x00, + .output_reg = 0x00, + .polarity_reg = 0x00, + .configuration_reg = 0x40 }, +}; + +/** * @brief board_init * * @return 0 @@ -46,6 +50,8 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init); + return 0; } diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h index a82795dc13..612c13e479 100644 --- a/board/ti/omap5_uevm/mux_data.h +++ b/board/ti/omap5_uevm/mux_data.h @@ -4,23 +4,7 @@ * * Sricharan R <r.sricharan@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _EVM5430_MUX_DATA_H #define _EVM5430_MUX_DATA_H @@ -56,6 +40,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */ {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */ {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ + {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ + {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ }; diff --git a/board/ti/omap730p2/Makefile b/board/ti/omap730p2/Makefile index af019b87ee..37a4d3418b 100644 --- a/board/ti/omap730p2/Makefile +++ b/board/ti/omap730p2/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c index a292627466..56f981c47b 100644 --- a/board/ti/omap730p2/flash.c +++ b/board/ti/omap730p2/flash.c @@ -9,23 +9,7 @@ * Texas Instruments, <www.ti.com> * Kshitij Gupta <Kshitij@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/board/ti/omap730p2/lowlevel_init.S b/board/ti/omap730p2/lowlevel_init.S index 6c574f1ed6..795c495372 100644 --- a/board/ti/omap730p2/lowlevel_init.S +++ b/board/ti/omap730p2/lowlevel_init.S @@ -14,23 +14,7 @@ * TODO : Tidy up and change to use system register defines * from omap730.h where possible. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <config.h> diff --git a/board/ti/omap730p2/omap730p2.c b/board/ti/omap730p2/omap730p2.c index 36204b2c88..48dc82699e 100644 --- a/board/ti/omap730p2/omap730p2.c +++ b/board/ti/omap730p2/omap730p2.c @@ -10,23 +10,7 @@ * Texas Instruments, <www.ti.com> * Kshitij Gupta <Kshitij@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile index b299e2fff8..1e489d20b6 100644 --- a/board/ti/panda/Makefile +++ b/board/ti/panda/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 1da5b359c0..e838ffd954 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -3,23 +3,7 @@ * Texas Instruments Incorporated, <www.ti.com> * Steve Sakoman <steve@sakoman.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <asm/arch/sys_proto.h> diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h index 5939257ff1..fb83eac9be 100644 --- a/board/ti/panda/panda_mux_data.h +++ b/board/ti/panda/panda_mux_data.h @@ -5,23 +5,7 @@ * Balaji Krishnamoorthy <balajitk@ti.com> * Aneesh V <aneesh@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _PANDA_MUX_DATA_H_ #define _PANDA_MUX_DATA_H_ diff --git a/board/ti/sdp3430/Makefile b/board/ti/sdp3430/Makefile index 9660a4e279..e72485c4b4 100644 --- a/board/ti/sdp3430/Makefile +++ b/board/ti/sdp3430/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/sdp3430/config.mk b/board/ti/sdp3430/config.mk index be4629897a..e4d9be13e3 100644 --- a/board/ti/sdp3430/config.mk +++ b/board/ti/sdp3430/config.mk @@ -5,23 +5,7 @@ # OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu # see http://www.ti.com/ for more information on Texas Instruments # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # # Physical Address: # 8000'0000 (bank0) diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 052efc589f..957940d53f 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -3,23 +3,7 @@ * Texas Instruments Incorporated, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <netdev.h> diff --git a/board/ti/sdp3430/sdp.h b/board/ti/sdp3430/sdp.h index 3526e94672..2acb302591 100644 --- a/board/ti/sdp3430/sdp.h +++ b/board/ti/sdp3430/sdp.h @@ -3,23 +3,7 @@ * Texas Instruments Incorporated * Richard Woodruff <r-woodruff2@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _BOARD_SDP_H_ #define _BOARD_SDP_H_ diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile index 72ad3eb07f..c522a2b84e 100644 --- a/board/ti/sdp4430/Makefile +++ b/board/ti/sdp4430/Makefile @@ -2,23 +2,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/sdp4430/cmd_bat.c b/board/ti/sdp4430/cmd_bat.c index fe3353896d..7e8dbb1b00 100644 --- a/board/ti/sdp4430/cmd_bat.c +++ b/board/ti/sdp4430/cmd_bat.c @@ -1,23 +1,7 @@ /* * Copyright (C) 2010 Texas Instruments * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 5dd1ba3cb4..25daaa9ffb 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -4,23 +4,7 @@ * Aneesh V <aneesh@ti.com> * Steve Sakoman <steve@sakoman.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <twl6030.h> diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h index 0760dad620..4394dbaa48 100644 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ b/board/ti/sdp4430/sdp4430_mux_data.h @@ -5,23 +5,7 @@ * Balaji Krishnamoorthy <balajitk@ti.com> * Aneesh V <aneesh@ti.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _SDP4430_MUX_DATA_H #define _SDP4430_MUX_DATA_H diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile index 09d24222f3..6059e203f3 100644 --- a/board/ti/ti814x/Makefile +++ b/board/ti/ti814x/Makefile @@ -3,15 +3,7 @@ # # Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed "as is" WITHOUT ANY WARRANTY of any -# kind, whether express or implied; without even the implied warranty -# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index 6ad3dd8fc7..c469645ff3 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -5,15 +5,7 @@ * * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -215,6 +207,7 @@ static struct cpsw_platform_data cpsw_data = { .ale_entries = 1024, .host_port_reg_ofs = 0x28, .hw_stats_reg_ofs = 0x400, + .bd_ram_ofs = 0x2000, .mac_control = (1 << 5), .control = cpsw_control, .host_port_num = 0, diff --git a/board/ti/tnetv107xevm/Makefile b/board/ti/tnetv107xevm/Makefile index baa53e3eb7..5b82e483b5 100644 --- a/board/ti/tnetv107xevm/Makefile +++ b/board/ti/tnetv107xevm/Makefile @@ -1,20 +1,5 @@ # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk diff --git a/board/ti/tnetv107xevm/config.mk b/board/ti/tnetv107xevm/config.mk index 79b8304cfb..51c2886b34 100644 --- a/board/ti/tnetv107xevm/config.mk +++ b/board/ti/tnetv107xevm/config.mk @@ -1,20 +1,5 @@ # -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# SPDX-License-Identifier: GPL-2.0+ # CONFIG_SYS_TEXT_BASE = 0x83FC0000 diff --git a/board/ti/tnetv107xevm/sdb_board.c b/board/ti/tnetv107xevm/sdb_board.c index 3ed1cfd18c..a95434b5ef 100644 --- a/board/ti/tnetv107xevm/sdb_board.c +++ b/board/ti/tnetv107xevm/sdb_board.c @@ -1,22 +1,7 @@ /* * TNETV107X-EVM: Board initialization * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> |