diff options
Diffstat (limited to 'board/ti/am335x/mux.c')
| -rw-r--r-- | board/ti/am335x/mux.c | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index acb8ff3e5c..8437ef515a 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -69,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = { {-1}, }; +static struct module_pin_mux mmc0_no_cd_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -250,6 +261,15 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } + } else if (!strncmp(header->config, "SKU#02", 6)) { + /* + * Industrial Motor Control (IDK) + * note: IDK console is on UART3 by default. + * So u-boot mus be build with CONFIG_SERIAL4 and + * CONFIG_CONS_INDEX=4 + */ + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_no_cd_pin_mux); } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); |