diff options
Diffstat (limited to 'board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg')
| -rw-r--r-- | board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg | 74 |
1 files changed, 0 insertions, 74 deletions
diff --git a/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg b/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg deleted file mode 100644 index 40747abbdb..0000000000 --- a/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2013 SolidRun ltd. - * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ZQ Calibrations */ -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -/* write leveling */ -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x005a0057 -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x004a0052 -/* - * DQS gating, read delay, write delay calibration values - * based on calibration compare of 0x00ffff00 - */ -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x02480240 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02340230 -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40404440 -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x38343034 -/* read data bit delay */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -/* Complete calibration by forced measurement */ -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 - -/* - * MMDC init: - * in DDR3, 32-bit mode, only MMDC0 is initiated: - */ -DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d -DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 - -DATA 4, MX6_MMDC_P0_MDCFG0, 0x3f435313 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8b63 - -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db -DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2 -DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -/* CS0_END - 0x2fffffff, 512M */ -DATA 4, MX6_MMDC_P0_MDASP, 0x00000017 - -/* MMDC0_MAARCR ADOPT optimized priorities. Dyn jump disabled */ -DATA 4, 0x021b0400, 0x11420000 - -/* MMDC0_MDCTL- row-14bits; col-10bits; burst length 8;32-bit data bus */ -DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000 - -/* - * Initialize 2GB DDR3 - Hynix H5TQ2G63BFR-H9C - * MR2 - */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008032 -/* MR3 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -/* MR1 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031 -/* MR0 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -/* ZQ calibration */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -/* final DDR setup */ -DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007 -DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 |