summaryrefslogtreecommitdiff
path: root/board/socrates/socrates.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/socrates/socrates.c')
-rw-r--r--board/socrates/socrates.c118
1 files changed, 59 insertions, 59 deletions
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 0991177726..d83dc7d6a3 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -51,7 +51,7 @@ ulong flash_get_size (ulong base, int banknum);
int checkboard (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
char *src;
int f;
@@ -87,7 +87,7 @@ int checkboard (void)
int misc_init_r (void)
{
- volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
/*
* Adjust flash start and offset to detected values
@@ -98,20 +98,20 @@ int misc_init_r (void)
/*
* Check if boot FLASH isn't max size
*/
- if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {
- memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);
- memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);
+ if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) {
+ memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff);
+ memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff);
/*
* Re-check to get correct base address
*/
- flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
+ flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
}
/*
* Check if only one FLASH bank is available
*/
- if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
+ if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
memctl->or1 = 0;
memctl->br1 = 0;
@@ -120,24 +120,24 @@ int misc_init_r (void)
*/
flash_protect (FLAG_PROTECT_CLEAR,
gd->bd->bi_flashstart, 0xffffffff,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Monitor protection ON by default */
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Redundant environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR_REDUND,
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
}
return 0;
@@ -148,12 +148,12 @@ int misc_init_r (void)
*/
void local_bus_init (void)
{
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
sys_info_t sysinfo;
uint clkdiv;
uint lbc_mhz;
- uint lcrr = CFG_LBC_LCRR;
+ uint lcrr = CONFIG_SYS_LBC_LCRR;
get_sys_info (&sysinfo);
clkdiv = lbc->lcrr & 0x0f;
@@ -219,7 +219,7 @@ void pci_init_board (void)
#ifdef CONFIG_BOARD_EARLY_INIT_R
int board_early_init_r (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* set and reset the GPIO pin 2 which will reset the W83782G chip */
out_8((unsigned char*)&gur->gpoutdr, 0x3F );
@@ -246,19 +246,19 @@ ft_board_setup(void *blob, bd_t *bd)
val[i++] = gd->bd->bi_flashstart;
val[i++] = gd->bd->bi_flashsize;
- if (mb862xx.frameAdrs == CFG_LIME_BASE) {
+ if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) {
/* Fixup LIME mapping */
val[i++] = 2; /* chip select number */
val[i++] = 0; /* always 0 */
- val[i++] = CFG_LIME_BASE;
- val[i++] = CFG_LIME_SIZE;
+ val[i++] = CONFIG_SYS_LIME_BASE;
+ val[i++] = CONFIG_SYS_LIME_SIZE;
}
/* Fixup FPGA mapping */
val[i++] = 3; /* chip select number */
val[i++] = 0; /* always 0 */
- val[i++] = CFG_FPGA_BASE;
- val[i++] = CFG_FPGA_SIZE;
+ val[i++] = CONFIG_SYS_FPGA_BASE;
+ val[i++] = CONFIG_SYS_FPGA_SIZE;
rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
val, i * sizeof(u32), 1);
@@ -268,14 +268,14 @@ ft_board_setup(void *blob, bd_t *bd)
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-#define CFG_LIME_SRST ((CFG_LIME_BASE) + 0x01FC002C)
-#define CFG_LIME_CCF ((CFG_LIME_BASE) + 0x01FC0038)
-#define CFG_LIME_MMR ((CFG_LIME_BASE) + 0x01FCFFFC)
+#define CONFIG_SYS_LIME_SRST ((CONFIG_SYS_LIME_BASE) + 0x01FC002C)
+#define CONFIG_SYS_LIME_CCF ((CONFIG_SYS_LIME_BASE) + 0x01FC0038)
+#define CONFIG_SYS_LIME_MMR ((CONFIG_SYS_LIME_BASE) + 0x01FCFFFC)
/* Lime clock frequency */
-#define CFG_LIME_CLK_100MHZ 0x00000
-#define CFG_LIME_CLK_133MHZ 0x10000
+#define CONFIG_SYS_LIME_CLK_100MHZ 0x00000
+#define CONFIG_SYS_LIME_CLK_133MHZ 0x10000
/* SDRAM parameter */
-#define CFG_LIME_MMR_VALUE 0x4157BA63
+#define CONFIG_SYS_LIME_MMR_VALUE 0x4157BA63
#define DISPLAY_WIDTH 800
#define DISPLAY_HEIGHT 480
@@ -308,11 +308,11 @@ const gdc_regs *board_get_regs (void)
return init_regs;
}
-#define CFG_LIME_CID ((CFG_LIME_BASE) + 0x01FC00F0)
-#define CFG_LIME_REV ((CFG_LIME_BASE) + 0x01FF8084)
+#define CONFIG_SYS_LIME_CID ((CONFIG_SYS_LIME_BASE) + 0x01FC00F0)
+#define CONFIG_SYS_LIME_REV ((CONFIG_SYS_LIME_BASE) + 0x01FF8084)
int lime_probe(void)
{
- volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
uint cfg_br2;
uint cfg_or2;
uint reg;
@@ -323,14 +323,14 @@ int lime_probe(void)
/* Configure GPCM for CS2 */
memctl->br2 = 0;
memctl->or2 = 0xfc000410;
- memctl->br2 = (CFG_LIME_BASE) | 0x00001901;
+ memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901;
/* Try to access GDC ID/Revision registers */
- reg = in_be32((void *)CFG_LIME_CID);
- reg = in_be32((void *)CFG_LIME_CID);
+ reg = in_be32((void *)CONFIG_SYS_LIME_CID);
+ reg = in_be32((void *)CONFIG_SYS_LIME_CID);
if (reg == 0x303) {
- reg = in_be32((void *)CFG_LIME_REV);
- reg = in_be32((void *)CFG_LIME_REV);
+ reg = in_be32((void *)CONFIG_SYS_LIME_REV);
+ reg = in_be32((void *)CONFIG_SYS_LIME_REV);
reg = ((reg & ~0xff) == 0x20050100) ? 1 : 0;
} else
reg = 0;
@@ -351,22 +351,22 @@ unsigned int board_video_init (void)
/*
* Reset Lime controller
*/
- out_be32((void *)CFG_LIME_SRST, 0x1);
+ out_be32((void *)CONFIG_SYS_LIME_SRST, 0x1);
udelay(200);
/* Set Lime clock to 133MHz */
- out_be32((void *)CFG_LIME_CCF, CFG_LIME_CLK_133MHZ);
+ out_be32((void *)CONFIG_SYS_LIME_CCF, CONFIG_SYS_LIME_CLK_133MHZ);
/* Delay required */
udelay(300);
/* Set memory parameters */
- out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
+ out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE);
mb862xx.winSizeX = DISPLAY_WIDTH;
mb862xx.winSizeY = DISPLAY_HEIGHT;
mb862xx.gdfIndex = GDF_15BIT_555RGB;
mb862xx.gdfBytesPP = 2;
- return CFG_LIME_BASE;
+ return CONFIG_SYS_LIME_BASE;
}
#define W83782D_REG_CFG 0x40
@@ -381,22 +381,22 @@ static int w83782d_hwmon_init(void)
{
u8 buf;
- if (i2c_read(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG, 1, &buf, 1))
+ if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 1, &buf, 1))
return -1;
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG, 0x80);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_BANK_SEL, 0);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_ADCCLK, 0x40);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 0x80);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BANK_SEL, 0);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_ADCCLK, 0x40);
- buf = i2c_reg_read(CFG_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL,
+ buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL,
buf | 0x80);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL2, 0);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_PWMOUT1, 0x47);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_VBAT, 0x01);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL2, 0);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_PWMOUT1, 0x47);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_VBAT, 0x01);
- buf = i2c_reg_read(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG);
- i2c_reg_write(CFG_I2C_W83782G_ADDR, W83782D_REG_CFG,
+ buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG);
+ i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG,
(buf & 0xf4) | 0x01);
return 0;
}
@@ -408,37 +408,37 @@ static void board_backlight_brightness(int br)
u8 old_buf;
/* Select bank 0 */
- if (i2c_read(CFG_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
+ if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
goto err;
else
buf = old_buf & 0xf8;
- if (i2c_write(CFG_I2C_W83782G_ADDR, 0x4e, 1, &buf, 1))
+ if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &buf, 1))
goto err;
if (br > 0) {
/* PWMOUT1 duty cycle ctrl */
buf = 255 / (100 / br);
- if (i2c_write(CFG_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
+ if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
goto err;
/* LEDs on */
- reg = in_be32((void *)(CFG_FPGA_BASE + 0x0c));
+ reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
if (!(reg & BACKLIGHT_ENABLE));
- out_be32((void *)(CFG_FPGA_BASE + 0x0c),
+ out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c),
reg | BACKLIGHT_ENABLE);
} else {
buf = 0;
- if (i2c_write(CFG_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
+ if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
goto err;
/* LEDs off */
- reg = in_be32((void *)(CFG_FPGA_BASE + 0x0c));
+ reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
reg &= ~BACKLIGHT_ENABLE;
- out_be32((void *)(CFG_FPGA_BASE + 0x0c), reg);
+ out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c), reg);
}
/* Restore previous bank setting */
- if (i2c_write(CFG_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
+ if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
goto err;
return;
View Lorry Controller Status