diff options
Diffstat (limited to 'board/phytium/durian/README')
| -rw-r--r-- | board/phytium/durian/README | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/board/phytium/durian/README b/board/phytium/durian/README new file mode 100644 index 0000000000..4443133e1a --- /dev/null +++ b/board/phytium/durian/README @@ -0,0 +1,59 @@ +Here is the step-by-step to boot U-Boot on phytium durian board. + +Compile U-Boot +============== + > make durian_defconfig + > make + +Get the prebuild binary about BPF +================================= + > cd ../ + > git clone https://github.com/phytium-durian/bpf.git + +Package the image +================= + > cd bpf + > cp ../u-boot/u-boot.bin ./ + > ./dopack + + The fip-all.bin is the final image. + +Flash the image into the spi nor-flash +====================================== + Any spi nor-flash and appropriate tool can be used to flash. + For example, we choose the S25FL256 chip that produced from + SPANSION company and EZP_XPro V1.2. + +Reset the board, you can get U-Boot log message from boot console: + +Power on... +Start pcie setup! +End pcie setup! +Start ddr setup! +End ddr setup! +Jump to entrypoint: 0x500000 + +U-Boot 2019.10-00594-g9ccc1b17ea-dirty (Oct 18 2019 - 00:17:09 +0800) + +DRAM: 1.9 GiB +In: uart@28001000 +Out: uart@28001000 +Err: uart@28001000 +scanning bus for devices... +Target spinup took 0 ms. +SATA link 1 timeout. +SATA link 2 timeout. +SATA link 3 timeout. +AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode +flags: 64bit ncq led only pmp fbss pio slum part sxs + Device 0: (0:0) Vendor: ATA Prod.: ST1000DM010-2EP1 Rev: CC43 + Type: Hard Disk + Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512) +SATA link 0 timeout. +SATA link 1 timeout. +SATA link 2 timeout. +SATA link 3 timeout. +AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode +flags: 64bit ncq led only pmp fbss pio slum part sxs +Hit any key to stop autoboot: 0 +durian# |