diff options
Diffstat (limited to 'board/overo')
| -rw-r--r-- | board/overo/overo.c | 14 | ||||
| -rw-r--r-- | board/overo/overo.h | 8 |
2 files changed, 8 insertions, 14 deletions
diff --git a/board/overo/overo.c b/board/overo/overo.c index 850dfeecd9..3c60b06ae7 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -118,10 +118,6 @@ int get_board_revision(void) revision = gpio_get_value(115) << 2 | gpio_get_value(113) << 1 | gpio_get_value(112); - - gpio_free(112); - gpio_free(113); - gpio_free(115); } else { printf("Error: unable to acquire board revision GPIOs\n"); revision = -1; @@ -153,8 +149,7 @@ int get_sdio2_config(void) sdio_direct = 0; } - gpio_free(130); - gpio_free(139); + gpio_direction_input(130); } else { printf("Error: unable to acquire sdio2 clk GPIOs\n"); sdio_direct = -1; @@ -233,6 +228,9 @@ int misc_init_r(void) printf("Recognized Tobi Duo expansion board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); + /* second lan chip */ + enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], + 0x2B000000, GPMC_SIZE_16M); break; case GUMSTIX_PALO35: printf("Recognized Palo35 expansion board (rev %d %s)\n", @@ -310,10 +308,6 @@ static void setup_net_chip(void) enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, GPMC_SIZE_16M); - /* second lan chip */ - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], 0x2B000000, - GPMC_SIZE_16M); - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ diff --git a/board/overo/overo.h b/board/overo/overo.h index d394f902a1..915f15bf10 100644 --- a/board/overo/overo.h +++ b/board/overo/overo.h @@ -160,10 +160,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ /*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M0)) /*CAM_VS */\ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M0)) /*CAM_PCLK*/\ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ @@ -290,7 +290,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\ MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\ |