summaryrefslogtreecommitdiff
path: root/board/ifm
diff options
context:
space:
mode:
Diffstat (limited to 'board/ifm')
-rw-r--r--board/ifm/ac14xx/Kconfig12
-rw-r--r--board/ifm/ac14xx/MAINTAINERS6
-rw-r--r--board/ifm/ac14xx/Makefile7
-rw-r--r--board/ifm/ac14xx/ac14xx.c569
-rw-r--r--board/ifm/o2dnt2/Kconfig77
-rw-r--r--board/ifm/o2dnt2/MAINTAINERS20
-rw-r--r--board/ifm/o2dnt2/Makefile8
-rw-r--r--board/ifm/o2dnt2/o2dnt2.c388
8 files changed, 0 insertions, 1087 deletions
diff --git a/board/ifm/ac14xx/Kconfig b/board/ifm/ac14xx/Kconfig
deleted file mode 100644
index 97e80d5ddd..0000000000
--- a/board/ifm/ac14xx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_AC14XX
-
-config SYS_BOARD
- default "ac14xx"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "ac14xx"
-
-endif
diff --git a/board/ifm/ac14xx/MAINTAINERS b/board/ifm/ac14xx/MAINTAINERS
deleted file mode 100644
index 8fd74e516e..0000000000
--- a/board/ifm/ac14xx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-AC14XX BOARD
-M: Anatolij Gustschin <agust@denx.de>
-S: Maintained
-F: board/ifm/ac14xx/
-F: include/configs/ac14xx.h
-F: configs/ac14xx_defconfig
diff --git a/board/ifm/ac14xx/Makefile b/board/ifm/ac14xx/Makefile
deleted file mode 100644
index 55def60417..0000000000
--- a/board/ifm/ac14xx/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := ac14xx.o
diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c
deleted file mode 100644
index cd79e804a0..0000000000
--- a/board/ifm/ac14xx/ac14xx.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
- * (C) Copyright 2009 Dave Srl www.dave.eu
- * (C) Copyright 2010 ifm ecomatic GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/bitops.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mpc512x.h>
-#include <fdt_support.h>
-#ifdef CONFIG_MISC_INIT_R
-#include <i2c.h>
-#endif
-
-static int mac_diag;
-static int gpio_diag;
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void gpio_configure(void)
-{
- immap_t *im;
- gpio512x_t *gpioregs;
-
- im = (immap_t *) CONFIG_SYS_IMMR;
- gpioregs = &im->gpio;
- out_be32(&gpioregs->gpodr, 0x00290000); /* open drain */
- out_be32(&gpioregs->gpdat, 0x80001040); /* data (when output) */
-
- /*
- * out_be32(&gpioregs->gpdir, 0xC2293020);
- * workaround for a hardware effect: configure direction in pieces,
- * setting all outputs at once drops the reset line too low and
- * makes us lose the MII connection (breaks ethernet for us)
- */
- out_be32(&gpioregs->gpdir, 0x02003060); /* direction */
- setbits_be32(&gpioregs->gpdir, 0x00200000); /* += reset asi */
- udelay(10);
- setbits_be32(&gpioregs->gpdir, 0x00080000); /* += reset safety */
- udelay(10);
- setbits_be32(&gpioregs->gpdir, 0x00010000); /* += reset comm */
- udelay(10);
- setbits_be32(&gpioregs->gpdir, 0xC0000000); /* += backlight, KB sel */
-
- /* to turn from red to yellow when U-Boot runs */
- setbits_be32(&gpioregs->gpdat, 0x00002020);
- out_be32(&gpioregs->gpimr, 0x00000000); /* interrupt mask */
- out_be32(&gpioregs->gpicr1, 0x00000004); /* interrupt sense part 1 */
- out_be32(&gpioregs->gpicr2, 0x00A80000); /* interrupt sense part 2 */
- out_be32(&gpioregs->gpier, 0xFFFFFFFF); /* interrupt events, clear */
-}
-
-/* the physical location of the pins */
-#define GPIOKEY_ROW_BITMASK 0x40000000
-#define GPIOKEY_ROW_UPPER 0
-#define GPIOKEY_ROW_LOWER 1
-
-#define GPIOKEY_COL0_BITMASK 0x20000000
-#define GPIOKEY_COL1_BITMASK 0x10000000
-#define GPIOKEY_COL2_BITMASK 0x08000000
-
-/* the logical presentation of pressed keys */
-#define GPIOKEY_BIT_FNLEFT (1 << 5)
-#define GPIOKEY_BIT_FNRIGHT (1 << 4)
-#define GPIOKEY_BIT_DIRUP (1 << 3)
-#define GPIOKEY_BIT_DIRLEFT (1 << 2)
-#define GPIOKEY_BIT_DIRRIGHT (1 << 1)
-#define GPIOKEY_BIT_DIRDOWN (1 << 0)
-
-/* the hotkey combination which starts recovery */
-#define GPIOKEY_BITS_RECOVERY (GPIOKEY_BIT_FNLEFT | GPIOKEY_BIT_DIRUP | \
- GPIOKEY_BIT_DIRDOWN)
-
-static void gpio_selectrow(gpio512x_t *gpioregs, u32 row)
-{
-
- if (row)
- setbits_be32(&gpioregs->gpdat, GPIOKEY_ROW_BITMASK);
- else
- clrbits_be32(&gpioregs->gpdat, GPIOKEY_ROW_BITMASK);
- udelay(10);
-}
-
-static u32 gpio_querykbd(void)
-{
- immap_t *im;
- gpio512x_t *gpioregs;
- u32 keybits;
- u32 input;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- gpioregs = &im->gpio;
- keybits = 0;
-
- /* query upper row */
- gpio_selectrow(gpioregs, GPIOKEY_ROW_UPPER);
- input = in_be32(&gpioregs->gpdat);
- if ((input & GPIOKEY_COL0_BITMASK) == 0)
- keybits |= GPIOKEY_BIT_FNLEFT;
- if ((input & GPIOKEY_COL1_BITMASK) == 0)
- keybits |= GPIOKEY_BIT_DIRUP;
- if ((input & GPIOKEY_COL2_BITMASK) == 0)
- keybits |= GPIOKEY_BIT_FNRIGHT;
-
- /* query lower row */
- gpio_selectrow(gpioregs, GPIOKEY_ROW_LOWER);
- input = in_be32(&gpioregs->gpdat);
- if ((input & GPIOKEY_COL0_BITMASK) == 0)
- keybits |= GPIOKEY_BIT_DIRLEFT;
- if ((input & GPIOKEY_COL1_BITMASK) == 0)
- keybits |= GPIOKEY_BIT_DIRRIGHT;
- if ((input & GPIOKEY_COL2_BITMASK) == 0)
- keybits |= GPIOKEY_BIT_DIRDOWN;
-
- /* return bit pattern for keys */
- return keybits;
-}
-
-/* excerpt from the recovery's hw_info.h */
-
-struct __attribute__ ((__packed__)) eeprom_layout {
- char magic[3]; /** 'ifm' */
- u8 len[2]; /** content length without magic/len fields */
- u8 version[3]; /** structure version */
- u8 type; /** type of PCB */
- u8 reserved[0x37]; /** padding up to offset 0x40 */
- u8 macaddress[6]; /** ethernet MAC (for the mainboard) @0x40 */
-};
-
-#define HW_COMP_MAINCPU 2
-
-static struct eeprom_layout eeprom_content;
-static int eeprom_is_valid;
-static int eeprom_version;
-
-#define get_eeprom_field_int(name) ({ \
- int value; \
- int idx; \
- value = 0; \
- for (idx = 0; idx < sizeof(name); idx++) { \
- value <<= 8; \
- value |= name[idx]; \
- } \
- value; \
-})
-
-static int read_eeprom(void)
-{
- return -ENOSYS;
-}
-
-int mac_read_from_eeprom(void)
-{
- const u8 *mac;
- const char *mac_txt;
-
- if (read_eeprom()) {
- printf("I2C EEPROM read failed.\n");
- return -1;
- }
-
- if (!eeprom_is_valid) {
- printf("I2C EEPROM content not valid\n");
- return -1;
- }
-
- mac = NULL;
- switch (eeprom_version) {
- case 1:
- case 2:
- mac = (const u8 *)&eeprom_content.macaddress;
- break;
- }
-
- if (mac && is_valid_ethaddr(mac)) {
- eth_setenv_enetaddr("ethaddr", mac);
- if (mac_diag) {
- mac_txt = getenv("ethaddr");
- if (mac_txt)
- printf("DIAG: MAC value [%s]\n", mac_txt);
- else
- printf("DIAG: failed to setup MAC env\n");
- }
- }
-
- return 0;
-}
-
-/*
- * BEWARE!
- * this board uses DDR1(!) Micron SDRAM, *NOT* the DDR2
- * which the ADS, Aria or PDM360NG boards are using
- * (the steps outlined here refer to the Micron datasheet)
- */
-u32 sdram_init_seq[] = {
- /* item 6, at least one NOP after CKE went high */
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- /* item 7, precharge all; item 8, tRP (20ns) */
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_NOP,
- /* item 9, extended mode register; item 10, tMRD 10ns) */
- CONFIG_SYS_MICRON_EMODE | CONFIG_SYS_MICRON_EMODE_PARAM,
- CONFIG_SYS_DDRCMD_NOP,
- /*
- * item 11, (base) mode register _with_ reset DLL;
- * item 12, tMRD (10ns)
- */
- CONFIG_SYS_MICRON_BMODE | CONFIG_SYS_MICRON_BMODE_RSTDLL |
- CONFIG_SYS_MICRON_BMODE_PARAM,
- CONFIG_SYS_DDRCMD_NOP,
- /* item 13, precharge all; item 14, tRP (20ns) */
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_NOP,
- /*
- * item 15, auto refresh (i.e. refresh with CKE held high);
- * item 16, tRFC (70ns)
- */
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- /*
- * item 17, auto refresh (i.e. refresh with CKE held high);
- * item 18, tRFC (70ns)
- */
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- /* item 19, optional, unassert DLL reset; item 20, tMRD (20ns) */
- CONFIG_SYS_MICRON_BMODE | CONFIG_SYS_MICRON_BMODE_PARAM,
- CONFIG_SYS_DDRCMD_NOP,
- /*
- * item 21, "actually done", but make sure 200 DRAM clock cycles
- * have passed after DLL reset before READ requests are issued
- * (200 cycles at 160MHz -> 1.25 usec)
- */
- /* EMPTY, optional, we don't do it */
-};
-
-int dram_init(void)
-{
- gd->ram_size = fixed_sdram(NULL, sdram_init_seq,
- ARRAY_SIZE(sdram_init_seq));
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- u32 keys;
- char *s;
- int want_recovery;
-
- /* setup GPIO directions and initial values */
- gpio_configure();
-
- /*
- * enforce the start of the recovery system when
- * - the appropriate keys were pressed
- * - "some" external software told us to
- * - a previous installation was aborted or has failed
- */
- want_recovery = 0;
- keys = gpio_querykbd();
- if (gpio_diag)
- printf("GPIO keyboard status [0x%02X]\n", keys);
- if ((keys & GPIOKEY_BITS_RECOVERY) == GPIOKEY_BITS_RECOVERY) {
- printf("detected recovery request (keyboard)\n");
- want_recovery = 1;
- }
- s = getenv("want_recovery");
- if ((s != NULL) && (*s != '\0')) {
- printf("detected recovery request (environment)\n");
- want_recovery = 1;
- }
- s = getenv("install_in_progress");
- if ((s != NULL) && (*s != '\0')) {
- printf("previous installation has not completed\n");
- want_recovery = 1;
- }
- s = getenv("install_failed");
- if ((s != NULL) && (*s != '\0')) {
- printf("previous installation has failed\n");
- want_recovery = 1;
- }
- if (want_recovery) {
- printf("enforced start of the recovery system\n");
- setenv("bootcmd", "run recovery");
- }
-
- /*
- * boot the recovery system without waiting; boot the
- * production system without waiting by default, only
- * insert a pause (to provide a chance to get a prompt)
- * when GPIO keys were pressed during power on
- */
- if (want_recovery)
- setenv("bootdelay", "0");
- else if (!keys)
- setenv("bootdelay", "0");
- else
- setenv("bootdelay", "2");
-
- /* get the ethernet MAC from I2C EEPROM */
- mac_read_from_eeprom();
-
- return 0;
-}
-
-/* setup specific IO pad configuration */
-static iopin_t ioregs_init[] = {
- { /* LPC CS3 */
- offsetof(struct ioctrl512x, io_control_nfc_ce0), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- { /* LPC CS1 */
- offsetof(struct ioctrl512x, io_control_lpc_cs1), 1,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- { /* LPC CS2 */
- offsetof(struct ioctrl512x, io_control_lpc_cs2), 1,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- { /* LPC CS4, CS5 */
- offsetof(struct ioctrl512x, io_control_pata_ce1), 2,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- { /* SDHC CLK, CMD, D0, D1, D2, D3 */
- offsetof(struct ioctrl512x, io_control_pata_ior), 6,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- { /* GPIO keyboard */
- offsetof(struct ioctrl512x, io_control_pci_ad30), 4,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO DN1 PF, LCD power, DN2 PF */
- offsetof(struct ioctrl512x, io_control_pci_ad26), 3,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO reset AS-i */
- offsetof(struct ioctrl512x, io_control_pci_ad21), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO reset safety */
- offsetof(struct ioctrl512x, io_control_pci_ad19), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO reset netX */
- offsetof(struct ioctrl512x, io_control_pci_ad16), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO ma2 en */
- offsetof(struct ioctrl512x, io_control_pci_ad15), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO SD CD, SD WP */
- offsetof(struct ioctrl512x, io_control_pci_ad08), 2,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* FEC RX DV */
- offsetof(struct ioctrl512x, io_control_pci_ad06), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(2),
- },
- { /* GPIO AS-i prog, AS-i done, LCD backlight */
- offsetof(struct ioctrl512x, io_control_pci_ad05), 3,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO AS-i wdg */
- offsetof(struct ioctrl512x, io_control_pci_req2), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO safety wdg */
- offsetof(struct ioctrl512x, io_control_pci_req1), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO netX wdg */
- offsetof(struct ioctrl512x, io_control_pci_req0), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO IRQ powerfail */
- offsetof(struct ioctrl512x, io_control_pci_inta), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO AS-i PWRD */
- offsetof(struct ioctrl512x, io_control_pci_frame), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO LED0, LED1 */
- offsetof(struct ioctrl512x, io_control_pci_idsel), 2,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* GPIO IRQ AS-i 1, IRQ AS-i 2, IRQ safety */
- offsetof(struct ioctrl512x, io_control_pci_irdy), 3,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /* DIU clk */
- offsetof(struct ioctrl512x, io_control_spdif_txclk), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(2),
- },
- { /* FEC TX ER, CRS */
- offsetof(struct ioctrl512x, io_control_spdif_tx), 2,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- { /* GPIO/GPT */ /* to *NOT* have the EXT IRQ0 float */
- offsetof(struct ioctrl512x, io_control_irq0), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- { /*
- * FEC col, tx en, tx clk, txd 0-3, mdc, rx er,
- * rdx 3-0, mdio, rx clk
- */
- offsetof(struct ioctrl512x, io_control_psc0_0), 15,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- /* optional: make sure PSC3 remains the serial console */
- { /* LPC CS6 */
- offsetof(struct ioctrl512x, io_control_psc3_4), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- /* make sure PSC4 remains available for SPI,
- *BUT* PSC4_1 is a GPIO kind of SS! */
- { /* enforce drive strength on the SPI pin */
- offsetof(struct ioctrl512x, io_control_psc4_0), 5,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- {
- offsetof(struct ioctrl512x, io_control_psc4_1), 1,
- IO_PIN_OVER_FMUX,
- IO_PIN_FMUX(3),
- },
- /* optional: make sure PSC5 remains available for SPI */
- { /* enforce drive strength on the SPI pin */
- offsetof(struct ioctrl512x, io_control_psc5_0), 5,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(1),
- },
- { /* LPC TSIZ1 */
- offsetof(struct ioctrl512x, io_control_psc6_0), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(1) | IO_PIN_DS(2),
- },
- { /* DIU hsync */
- offsetof(struct ioctrl512x, io_control_psc6_1), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(1),
- },
- { /* DIU vsync */
- offsetof(struct ioctrl512x, io_control_psc6_4), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(1),
- },
- { /* PSC7, part of DIU RGB */
- offsetof(struct ioctrl512x, io_control_psc7_0), 2,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(1),
- },
- { /* PSC7, safety UART */
- offsetof(struct ioctrl512x, io_control_psc7_2), 2,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(0) | IO_PIN_DS(1),
- },
- { /* DIU (part of) RGB[] */
- offsetof(struct ioctrl512x, io_control_psc8_3), 16,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(1),
- },
- { /* DIU data enable */
- offsetof(struct ioctrl512x, io_control_psc11_4), 1,
- IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR,
- IO_PIN_FMUX(2) | IO_PIN_DS(1),
- },
- /* reduce LPB drive strength for improved EMI */
- { /* LPC OE, LPC RW */
- offsetof(struct ioctrl512x, io_control_lpc_oe), 2,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- { /* LPC AX03 through LPC AD00 */
- offsetof(struct ioctrl512x, io_control_lpc_ax03), 36,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- { /* LPC CS5 */
- offsetof(struct ioctrl512x, io_control_pata_ce2), 1,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- { /* SDHC CLK */
- offsetof(struct ioctrl512x, io_control_nfc_wp), 1,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
- { /* SDHC DATA */
- offsetof(struct ioctrl512x, io_control_nfc_ale), 4,
- IO_PIN_OVER_DRVSTR,
- IO_PIN_DS(2),
- },
-};
-
-int checkboard(void)
-{
- puts("Board: ifm AC14xx\n");
-
- /* initialize function mux & slew rate IO inter alia on IO Pins */
- iopin_initialize_bits(ioregs_init, ARRAY_SIZE(ioregs_init));
-
- return 0;
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/ifm/o2dnt2/Kconfig b/board/ifm/o2dnt2/Kconfig
deleted file mode 100644
index e9d32ddc54..0000000000
--- a/board/ifm/o2dnt2/Kconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-if TARGET_O2D
-
-config SYS_BOARD
- default "o2dnt2"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "o2d"
-
-endif
-
-if TARGET_O2D300
-
-config SYS_BOARD
- default "o2dnt2"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "o2d300"
-
-endif
-
-if TARGET_O2DNT2
-
-config SYS_BOARD
- default "o2dnt2"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "o2dnt2"
-
-endif
-
-if TARGET_O2I
-
-config SYS_BOARD
- default "o2dnt2"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "o2i"
-
-endif
-
-if TARGET_O2MNT
-
-config SYS_BOARD
- default "o2dnt2"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "o2mnt"
-
-endif
-
-if TARGET_O3DNT
-
-config SYS_BOARD
- default "o2dnt2"
-
-config SYS_VENDOR
- default "ifm"
-
-config SYS_CONFIG_NAME
- default "o3dnt"
-
-endif
diff --git a/board/ifm/o2dnt2/MAINTAINERS b/board/ifm/o2dnt2/MAINTAINERS
deleted file mode 100644
index 002f89e729..0000000000
--- a/board/ifm/o2dnt2/MAINTAINERS
+++ /dev/null
@@ -1,20 +0,0 @@
-O2DNT2 BOARD
-M: Anatolij Gustschin <agust@denx.de>
-S: Maintained
-F: board/ifm/o2dnt2/
-F: include/configs/o2d.h
-F: configs/O2D_defconfig
-F: include/configs/o2d300.h
-F: configs/O2D300_defconfig
-F: include/configs/o2dnt2.h
-F: configs/O2DNT2_defconfig
-F: configs/O2DNT2_RAMBOOT_defconfig
-F: include/configs/o2i.h
-F: configs/O2I_defconfig
-F: include/configs/o2mnt.h
-F: configs/O2MNT_defconfig
-F: configs/O2MNT_O2M110_defconfig
-F: configs/O2MNT_O2M112_defconfig
-F: configs/O2MNT_O2M113_defconfig
-F: include/configs/o3dnt.h
-F: configs/O3DNT_defconfig
diff --git a/board/ifm/o2dnt2/Makefile b/board/ifm/o2dnt2/Makefile
deleted file mode 100644
index 64d6ba8c55..0000000000
--- a/board/ifm/o2dnt2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2005-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := o2dnt2.o
diff --git a/board/ifm/o2dnt2/o2dnt2.c b/board/ifm/o2dnt2/o2dnt2.c
deleted file mode 100644
index 7770806bd2..0000000000
--- a/board/ifm/o2dnt2/o2dnt2.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * Partially derived from board code for digsyMTC,
- * (C) Copyright 2009
- * Grzegorz Bernacki, Semihalf, gjb@semihalf.com
- *
- * (C) Copyright 2012
- * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <net.h>
-#include <pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xD2322800
-#define SDRAM_CONFIG2 0x8AD70000
-
-enum ifm_sensor_type {
- O2DNT = 0x00, /* !< O2DNT 32MB */
- O2DNT2 = 0x01, /* !< O2DNT2 64MB */
- O3DNT = 0x02, /* !< O3DNT 32MB */
- O3DNT_MIN = 0x40, /* !< O3DNT Minerva 32MB */
- UNKNOWN = 0xff, /* !< Unknow sensor */
-};
-
-static enum ifm_sensor_type gt_ifm_sensor_type;
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start(int hi_addr)
-{
- struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
- long control = SDRAM_CONTROL | hi_addr_bit;
-
- /* unlock mode register */
- out_be32(&sdram->ctrl, control | 0x80000000);
-
- /* precharge all banks */
- out_be32(&sdram->ctrl, control | 0x80000002);
-
- /* auto refresh */
- out_be32(&sdram->ctrl, control | 0x80000004);
-
- /* set mode register */
- out_be32(&sdram->mode, SDRAM_MODE);
-
- /* normal operation */
- out_be32(&sdram->ctrl, control);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced dram_init does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if
- * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
- */
-int dram_init(void)
-{
- struct mpc5xxx_mmap_ctl *mmap_ctl =
- (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
- struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
- ulong dramsize = 0;
- ulong dramsize2 = 0;
- uint svr, pvr;
-
- if (gt_ifm_sensor_type == O2DNT2) {
- /* activate SDRAM CS1 */
- setbits_be32((void *)MPC5XXX_GPS_PORT_CONFIG, 0x80000000);
- }
-
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- out_be32(&mmap_ctl->sdram0, 0x0000001E); /* 2 GB at 0x0 */
- out_be32(&mmap_ctl->sdram1, 0x00000000); /* disabled */
-
- /* setup config registers */
- out_be32(&sdram->config1, SDRAM_CONFIG1);
- out_be32(&sdram->config2, SDRAM_CONFIG2);
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20))
- dramsize = 0;
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32(&mmap_ctl->sdram0,
- (0x13 + __builtin_ffs(dramsize >> 20) - 1));
- } else {
- out_be32(&mmap_ctl->sdram0, 0); /* disabled */
- }
-
- /* let SDRAM CS1 start right after CS0 */
- out_be32(&mmap_ctl->sdram1, dramsize + 0x0000001E); /* 2G */
-
- /* find RAM size using SDRAM CS1 only */
- if (!dramsize)
- sdram_start(0);
-
- test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize),
- 0x80000000);
- if (!dramsize) {
- sdram_start(1);
- test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize),
- 0x80000000);
- }
-
- if (test1 > test2) {
- sdram_start(0);
- dramsize2 = test1;
- } else {
- dramsize2 = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize2 < (1 << 20))
- dramsize2 = 0;
-
- /* set SDRAM CS1 size according to the amount of RAM found */
- if (dramsize2 > 0) {
- out_be32(&mmap_ctl->sdram1, (dramsize |
- (0x13 + __builtin_ffs(dramsize2 >> 20) - 1)));
- } else {
- out_be32(&mmap_ctl->sdram1, dramsize); /* disabled */
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32(&mmap_ctl->sdram0) & 0xFF;
- if (dramsize >= 0x13)
- dramsize = (1 << (dramsize - 0x13)) << 20;
- else
- dramsize = 0;
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = in_be32(&mmap_ctl->sdram1) & 0xFF;
- if (dramsize2 >= 0x13)
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- else
- dramsize2 = 0;
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
- * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
- *
- * "The SDelay should be written to a value of 0x00000004. It is
- * required to account for changes caused by normal wafer processing
- * parameters."
- */
- svr = get_svr();
- pvr = get_pvr();
- if ((SVR_MJREV(svr) >= 2) &&
- (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
- out_be32(&sdram->sdelay, 0x04);
-
- gd->ram_size = dramsize + dramsize2;
-
- return 0;
-}
-
-
-#define GPT_GPIO_IN 0x4
-
-int checkboard(void)
-{
- struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT;
- unsigned char board_config = 0;
- int i;
-
- /* switch gpt0 - gpt7 to input */
- for (i = 0; i < 7; i++)
- out_be32(&gpt[i].emsr, GPT_GPIO_IN);
-
- /* get configuration byte on timer-port */
- for (i = 0; i < 7; i++)
- board_config |= (in_be32(&gpt[i].sr) & 0x100) >> (8 - i);
-
- puts("Board: ");
-
- switch (board_config) {
- case 0:
- puts("O2DNT\n");
- gt_ifm_sensor_type = O2DNT;
- break;
- case 1:
- puts("O3DNT\n");
- gt_ifm_sensor_type = O3DNT;
- break;
- case 2:
- puts("O2DNT2\n");
- gt_ifm_sensor_type = O2DNT2;
- break;
- case 64:
- puts("O3DNT Minerva\n");
- gt_ifm_sensor_type = O3DNT_MIN;
- break;
- default:
- puts("Unknown\n");
- gt_ifm_sensor_type = UNKNOWN;
- break;
- }
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- struct mpc5xxx_lpb *lpb_regs = (struct mpc5xxx_lpb *)MPC5XXX_LPB;
-
- /*
- * Now, when we are in RAM, enable flash write access for detection
- * process. Note that CS_BOOT cannot be cleared when executing in flash.
- */
- clrbits_be32(&lpb_regs->cs0_cfg, 1); /* clear RO */
- /* disable CS_BOOT */
- clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25));
- /* enable CS0 */
- setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16));
-
- return 0;
-}
-
-#define MIIM_LXT971_LED_CFG_REG 0x14
-#define LXT971_LED_CFG_LINK_STATUS 0x4000
-#define LXT971_LED_CFG_RX_TX_ACTIVITY 0x0700
-#define LXT971_LED_CFG_LINK_ACTIVITY 0x00D0
-#define LXT971_LED_CFG_PULSE_STRETCH 0x0002
-/*
- * Additional PHY intialization after reset in mpc5xxx_fec_init_phy()
- */
-void reset_phy(void)
-{
- /*
- * Set LED configuration bits.
- * It can't be done in misc_init_r() since FEC is not
- * initialized at this time. Therefore we do it here.
- */
- miiphy_write("FEC", CONFIG_PHY_ADDR, MIIM_LXT971_LED_CFG_REG,
- LXT971_LED_CFG_LINK_STATUS |
- LXT971_LED_CFG_RX_TX_ACTIVITY |
- LXT971_LED_CFG_LINK_ACTIVITY |
- LXT971_LED_CFG_PULSE_STRETCH);
-}
-
-#if defined(CONFIG_POST)
-/*
- * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3
- * is left open, no keypress is detected.
- */
-int post_hotkeys_pressed(void)
-{
- struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
-
- /*
- * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in
- * CODEC or UART mode. Consumer IrDA should still be possible.
- */
- clrbits_be32(&gpio->port_config, 0x07000000);
- setbits_be32(&gpio->port_config, 0x03000000);
-
- /* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */
- setbits_be32(&gpio->simple_gpioe, 0x20000000);
-
- /* Configure GPIO_IRDA_1 as input */
- clrbits_be32(&gpio->simple_ddr, 0x20000000);
-
- return (in_be32(&gpio->simple_ival) & 0x20000000) ? 0 : 1;
-}
-#endif
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#ifdef CONFIG_OF_BOARD_SETUP
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-static void ft_adapt_flash_base(void *blob)
-{
- flash_info_t *dev = &flash_info[0];
- int off;
- struct fdt_property *prop;
- int len;
- u32 *reg, *reg2;
-
- off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb");
- if (off < 0) {
- printf("Could not find fsl,mpc5200b-lpb node.\n");
- return;
- }
-
- /* found compatible property */
- prop = fdt_get_property_w(blob, off, "ranges", &len);
- if (prop) {
- reg = reg2 = (u32 *)&prop->data[0];
-
- reg[2] = dev->start[0];
- reg[3] = dev->size;
- fdt_setprop(blob, off, "ranges", reg2, len);
- } else
- printf("Could not find ranges\n");
-}
-
-extern ulong flash_get_size(phys_addr_t base, int banknum);
-
-/* Update the flash baseaddr settings */
-int update_flash_size(int flash_size)
-{
- struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
- flash_info_t *dev;
- int i;
- int size = 0;
- unsigned long base = 0x0;
- u32 *cs_reg = (u32 *)&mm->cs0_start;
-
- for (i = 0; i < 2; i++) {
- dev = &flash_info[i];
-
- if (dev->size) {
- /* calculate new base addr for this chipselect */
- base -= dev->size;
- out_be32(cs_reg, START_REG(base));
- cs_reg++;
- out_be32(cs_reg, STOP_REG(base, dev->size));
- cs_reg++;
- /* recalculate the sectoraddr in the cfi driver */
- size += flash_get_size(base, i);
- }
- }
- flash_protect_default();
- gd->bd->bi_flashstart = base;
- return 0;
-}
-#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- int phy_addr = CONFIG_PHY_ADDR;
- char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
-
- ft_cpu_setup(blob, bd);
-
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
- /* Update reg property in all nor flash nodes too */
- fdt_fixup_nor_flash_size(blob);
-#endif
- ft_adapt_flash_base(blob);
-#endif
- /* fix up the phy address */
- do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
-
- return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
View Lorry Controller Status