diff options
Diffstat (limited to 'board/freescale/mx7dsabresd/mx7dsabresd.c')
-rw-r--r-- | board/freescale/mx7dsabresd/mx7dsabresd.c | 64 |
1 files changed, 1 insertions, 63 deletions
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index f1120d67e3..835eed3316 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -16,7 +16,6 @@ #include <fsl_esdhc_imx.h> #include <mmc.h> #include <miiphy.h> -#include <netdev.h> #include <power/pmic.h> #include <power/pfuze3000_pmic.h> #include "../common/pfuze.h" @@ -29,11 +28,6 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) -#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) - -#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) - #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ PAD_CTL_DSE_3P3V_49OHM) @@ -170,30 +164,6 @@ static int setup_lcd(void) } #endif -#ifdef CONFIG_FEC_MXC -static iomux_v3_cfg_t const fec1_pads[] = { - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_GPIO1_IO10__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX7D_PAD_GPIO1_IO11__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), -}; - -static void setup_iomux_fec(void) -{ - imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); -} -#endif - static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); @@ -216,37 +186,6 @@ int mmc_map_to_kernel_blk(int dev_no) } #ifdef CONFIG_FEC_MXC -int board_eth_init(bd_t *bis) -{ - int ret; - unsigned int gpio; - - ret = gpio_lookup_name("gpio_spi@0_5", NULL, NULL, &gpio); - if (ret) { - printf("GPIO: 'gpio_spi@0_5' not found\n"); - return -ENODEV; - } - - ret = gpio_request(gpio, "fec_rst"); - if (ret && ret != -EBUSY) { - printf("gpio: requesting pin %u failed\n", gpio); - return ret; - } - - gpio_direction_output(gpio, 0); - udelay(500); - gpio_direction_output(gpio, 1); - - setup_iomux_fec(); - - ret = fecmxc_initialize_multi(bis, 0, - CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); - if (ret) - printf("FEC1 MXC: %s:failed\n", __func__); - - return ret; -} - static int setup_fec(void) { struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs @@ -260,7 +199,6 @@ static int setup_fec(void) return set_clk_enet(ENET_125MHZ); } - int board_phy_config(struct phy_device *phydev) { /* enable rgmii rxc skew and phy mode select to RGMII copper */ @@ -326,7 +264,7 @@ int power_init_board(void) struct udevice *dev; int ret, dev_id, rev_id; - ret = pmic_get("pfuze3000", &dev); + ret = pmic_get("pfuze3000@08", &dev); if (ret == -ENODEV) return 0; if (ret != 0) |