1 files changed, 154 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/cache_uniphier.c b/arch/arm/mach-uniphier/cache_uniphier.c
new file mode 100644
index 0000000000..52f3c7c7a6
--- /dev/null
+++ b/arch/arm/mach-uniphier/cache_uniphier.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7.h>
+#include <mach/ssc-regs.h>
+
+#ifdef CONFIG_UNIPHIER_L2CACHE_ON
+static void uniphier_cache_maint_all(u32 operation)
+{
+	/* try until the command is successfully set */
+	do {
+		writel(SSCOQM_S_ALL | SSCOQM_CE | operation, SSCOQM);
+	} while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE));
+
+	/* wait until the operation is completed */
+	while (readl(SSCOLPQS) != SSCOLPQS_EF)
+		;
+
+	/* clear the complete notification flag */
+	writel(SSCOLPQS_EF, SSCOLPQS);
+
+	writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */
+	readl(SSCOPE); /* need a read back to confirm */
+}
+
+void v7_outer_cache_flush_all(void)
+{
+	uniphier_cache_maint_all(SSCOQM_CM_WB_INV);
+}
+
+void v7_outer_cache_inval_all(void)
+{
+	uniphier_cache_maint_all(SSCOQM_CM_INV);
+}
+
+static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation)
+{
+	/* try until the command is successfully set */
+	do {
+		writel(SSCOQM_S_ADDRESS | SSCOQM_CE | operation, SSCOQM);
+		writel(start, SSCOQAD);
+		writel(size, SSCOQSZ);
+
+	} while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE));
+
+	/* wait until the operation is completed */
+	while (readl(SSCOLPQS) != SSCOLPQS_EF)
+		;
+
+	/* clear the complete notification flag */
+	writel(SSCOLPQS_EF, SSCOLPQS);
+}
+
+static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation)
+{
+	u32 size;
+
+	/*
+	 * If start address is not aligned to cache-line,
+	 * do cache operation for the first cache-line
+	 */
+	start = start & ~(SSC_LINE_SIZE - 1);
+
+	if (start == 0 && end >= (u32)(-SSC_LINE_SIZE)) {
+		/* this means cache operation for all range */
+		uniphier_cache_maint_all(operation);
+		return;
+	}
+
+	/*
+	 * If end address is not aligned to cache-line,
+	 * do cache operation for the last cache-line
+	 */
+	size = (end - start + SSC_LINE_SIZE - 1) & ~(SSC_LINE_SIZE - 1);
+
+	while (size) {
+		u32 chunk_size = size > SSC_RANGE_OP_MAX_SIZE ?
+						SSC_RANGE_OP_MAX_SIZE : size;
+		__uniphier_cache_maint_range(start, chunk_size, operation);
+
+		start += chunk_size;
+		size -= chunk_size;
+	}
+
+	writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */
+	readl(SSCOPE); /* need a read back to confirm */
+}
+
+void v7_outer_cache_flush_range(u32 start, u32 end)
+{
+	uniphier_cache_maint_range(start, end, SSCOQM_CM_WB_INV);
+}
+
+void v7_outer_cache_inval_range(u32 start, u32 end)
+{
+	uniphier_cache_maint_range(start, end, SSCOQM_CM_INV);
+}
+
+void v7_outer_cache_enable(void)
+{
+	u32 tmp;
+	tmp = readl(SSCC);
+	tmp |= SSCC_ON;
+	writel(tmp, SSCC);
+}
+#endif
+
+void v7_outer_cache_disable(void)
+{
+	u32 tmp;
+	tmp = readl(SSCC);
+	tmp &= ~SSCC_ON;
+	writel(tmp, SSCC);
+}
+
+void wakeup_secondary(void);
+
+void enable_caches(void)
+{
+	uint32_t reg;
+
+#ifdef CONFIG_UNIPHIER_SMP
+	/*
+	 * The secondary CPU must move to DDR,
+	 * before L2 disable.
+	 * On SPL, the Page Table is located on the L2.
+	 */
+	wakeup_secondary();
+#endif
+	/*
+	 * UniPhier SoCs must use L2 cache for init stack pointer.
+	 * We disable L2 and L1 in this order.
+	 * If CONFIG_SYS_DCACHE_OFF is not defined,
+	 * caches are enabled again with a new page table.
+	 */
+
+	/* L2 disable */
+	v7_outer_cache_disable();
+
+	/* L1 disable */
+	reg = get_cr();
+	reg &= ~(CR_C | CR_M);
+	set_cr(reg);
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+	dcache_enable();
+#endif
+}