summaryrefslogtreecommitdiff
path: root/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts')
-rw-r--r--arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts46
1 files changed, 3 insertions, 43 deletions
diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
index 763cb03033..e2bfe00588 100644
--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -73,8 +73,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bpi_m1p>;
green {
label = "bananapi-m1-plus:green:usr";
@@ -90,15 +88,11 @@
mmc3_pwrseq: mmc3_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -134,7 +128,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
@@ -156,8 +150,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -175,13 +167,11 @@
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
+ pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -191,8 +181,6 @@
&mmc3 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
@@ -209,11 +197,6 @@
};
};
-&mmc3_pins_a {
- /* AP6210 requires pull-up */
- bias-pull-up;
-};
-
&ohci0 {
status = "okay";
};
@@ -226,29 +209,6 @@
status = "okay";
};
-&pio {
- gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
- pins = "PH23";
- function = "gpio_out";
- };
-
- led_pins_bpi_m1p: led_pins@0 {
- pins = "PH24", "PH25";
- function = "gpio_out";
- };
-
- mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
- pins = "PH10";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
- pins = "PH22";
- function = "gpio_out";
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -280,7 +240,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};