diff options
Diffstat (limited to 'arch/arm/dts/sun50i-a64-pinephone.dtsi')
| -rw-r--r-- | arch/arm/dts/sun50i-a64-pinephone.dtsi | 90 |
1 files changed, 75 insertions, 15 deletions
diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi index 25150aba74..9f69d489a8 100644 --- a/arch/arm/dts/sun50i-a64-pinephone.dtsi +++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &rtl8723cs; serial0 = &uart0; }; @@ -20,6 +21,7 @@ compatible = "pwm-backlight"; pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + power-supply = <®_ps>; /* Backlight configuration differs per PinePhone revision. */ }; @@ -30,25 +32,51 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_BLUE>; gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ }; - green { + led-1 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ }; - red { + led-2 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_RED>; gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ }; }; + reg_ps: ps-regulator { + compatible = "regulator-fixed"; + regulator-name = "ps"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + reg_vbat_wifi: vbat-wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vbat-wifi"; + }; + + sgm3140: led-controller { + compatible = "sgmicro,sgm3140"; + vin-supply = <®_dcdc1>; + + sgm3140_flash: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ @@ -142,15 +170,23 @@ status = "okay"; /* Magnetometer */ - lis3mdl: lis3mdl@1e { + lis3mdl: magnetometer@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; vddio-supply = <®_dldo1>; }; + /* Light/proximity sensor */ + light-sensor@48 { + compatible = "sensortek,stk3311"; + reg = <0x48>; + interrupt-parent = <&pio>; + interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ + }; + /* Accelerometer/gyroscope */ - mpu6050@68 { + accelerometer@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&pio>; @@ -167,6 +203,7 @@ &lradc { vref-supply = <®_aldo3>; + wakeup-source; status = "okay"; button-200 { @@ -195,6 +232,20 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vbat_wifi>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -251,10 +302,6 @@ #include "axp803.dtsi" -&ac_power_supply { - status = "okay"; -}; - &battery_power_supply { status = "okay"; }; @@ -274,8 +321,8 @@ ®_aldo3 { regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-name = "vcc-pll-avcc"; }; @@ -392,10 +439,10 @@ "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone", "MBIAS", "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", @@ -408,6 +455,19 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723cs-bt"; + device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */ + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; +}; + /* Connected to the modem (hardware flow control can't be used) */ &uart3 { pinctrl-names = "default"; |