diff options
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sunxi/spl_spi_sunxi.c | 41 |
2 files changed, 33 insertions, 10 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index eb046160e6..be0822bfb7 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -994,7 +994,7 @@ config SPL_STACK_R_ADDR config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 help Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 357953cfce..a3997b2590 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -72,7 +72,12 @@ /*****************************************************************************/ #define CCM_AHB_GATING0 (0x01C20000 + 0x60) +#define CCM_H6_SPI_BGR_REG (0x03001000 + 0x96c) +#ifdef CONFIG_MACH_SUN50I_H6 +#define CCM_SPI0_CLK (0x03001000 + 0x940) +#else #define CCM_SPI0_CLK (0x01C20000 + 0xA0) +#endif #define SUN6I_BUS_SOFT_RST_REG0 (0x01C20000 + 0x2C0) #define AHB_RESET_SPI0_SHIFT 20 @@ -86,14 +91,21 @@ /* * Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting * from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3. + * The H6 uses PC0, PC2, PC3, PC5. */ static void spi0_pinmux_setup(unsigned int pin_function) { - unsigned int pin; + /* All chips use PC0 and PC2. */ + sunxi_gpio_set_cfgpin(SUNXI_GPC(0), pin_function); + sunxi_gpio_set_cfgpin(SUNXI_GPC(2), pin_function); - for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++) - sunxi_gpio_set_cfgpin(pin, pin_function); + /* All chips except H6 use PC1, and only H6 uses PC5. */ + if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + sunxi_gpio_set_cfgpin(SUNXI_GPC(1), pin_function); + else + sunxi_gpio_set_cfgpin(SUNXI_GPC(5), pin_function); + /* Older generations use PC23 for CS, newer ones use PC3. */ if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I) || IS_ENABLED(CONFIG_MACH_SUN8I_R40)) sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function); @@ -103,7 +115,8 @@ static void spi0_pinmux_setup(unsigned int pin_function) static bool is_sun6i_gen_spi(void) { - return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I); + return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) || + IS_ENABLED(CONFIG_MACH_SUN50I_H6); } static uintptr_t spi0_base_address(void) @@ -111,6 +124,9 @@ static uintptr_t spi0_base_address(void) if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) return 0x01C05000; + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + return 0x05010000; + if (!is_sun6i_gen_spi()) return 0x01C05000; @@ -125,12 +141,15 @@ static void spi0_enable_clock(void) uintptr_t base = spi0_base_address(); /* Deassert SPI0 reset on SUN6I */ - if (is_sun6i_gen_spi()) + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + setbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1); + else if (is_sun6i_gen_spi()) setbits_le32(SUN6I_BUS_SOFT_RST_REG0, (1 << AHB_RESET_SPI0_SHIFT)); /* Open the SPI0 gate */ - setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); + if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); /* Divide by 4 */ writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ? @@ -170,10 +189,13 @@ static void spi0_disable_clock(void) writel(0, CCM_SPI0_CLK); /* Close the SPI0 gate */ - clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); + if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); /* Assert SPI0 reset on SUN6I */ - if (is_sun6i_gen_spi()) + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + clrbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1); + else if (is_sun6i_gen_spi()) clrbits_le32(SUN6I_BUS_SOFT_RST_REG0, (1 << AHB_RESET_SPI0_SHIFT)); } @@ -182,7 +204,8 @@ static void spi0_init(void) { unsigned int pin_function = SUNXI_GPC_SPI0; - if (IS_ENABLED(CONFIG_MACH_SUN50I)) + if (IS_ENABLED(CONFIG_MACH_SUN50I) || + IS_ENABLED(CONFIG_MACH_SUN50I_H6)) pin_function = SUN50I_GPC_SPI0; spi0_pinmux_setup(pin_function); |