diff options
| -rw-r--r-- | board/sunxi/gmac.c | 4 | ||||
| -rw-r--r-- | configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 | ||||
| -rw-r--r-- | configs/A20-OLinuXino_MICRO_defconfig | 1 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 8 |
4 files changed, 14 insertions, 0 deletions
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 69eb8ff2d9..826650c89b 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -33,7 +33,11 @@ void eth_init_board(void) #ifndef CONFIG_MACH_SUN6I /* Configure pin mux settings for GMAC */ +#ifdef CONFIG_SUN7I_GMAC_FORCE_TXERR + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) { +#else for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { +#endif #ifdef CONFIG_RGMII /* skip unused pins in RGMII mode */ if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index 2ff2723065..43bcea92a5 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SUN7I_GMAC_FORCE_TXERR=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 1a0ad5a6d4..22eacb370e 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SUN7I_GMAC_FORCE_TXERR=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 52555da4b3..d42d915f17 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -244,6 +244,14 @@ config SUN7I_GMAC help Enable the support for Sun7i GMAC Ethernet controller +config SUN7I_GMAC_FORCE_TXERR + bool "Force PA17 as gmac function" + depends on SUN7I_GMAC + help + Some ethernet phys needs TXERR control. Since the GMAC + doesn't have such signal, setting PA17 as GMAC function + makes the pin output low, which enables data transmission. + config SUN4I_EMAC bool "Allwinner Sun4i Ethernet MAC support" depends on DM_ETH |