diff options
-rw-r--r-- | doc/README.x86 | 37 | ||||
-rw-r--r-- | doc/board/intel/edison.rst | 41 | ||||
-rw-r--r-- | doc/board/intel/index.rst | 1 |
3 files changed, 42 insertions, 37 deletions
diff --git a/doc/README.x86 b/doc/README.x86 index 5e85b57665..28d6ae00c0 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -47,16 +47,6 @@ on other architectures, like below: $ make coreboot_defconfig $ make all -Build Instructions for U-Boot as main bootloader ------------------------------------------------- - -Intel Edison instructions: - -Simple you can build U-Boot and obtain u-boot.bin - -$ make edison_defconfig -$ make all - Build Instructions for U-Boot as BIOS replacement (bare mode) ------------------------------------------------------------- Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a @@ -346,33 +336,6 @@ are missing in the 64-bit world. One notable feature is the VGA console support which is currently missing, so that you must specify '-nographic' to get 64-bit U-Boot up and running. -Updating U-Boot on Edison -------------------------- -By default Intel Edison boards are shipped with preinstalled heavily -patched U-Boot v2014.04. Though it supports DFU which we may be able to -use. - -1. Prepare u-boot.bin as described in chapter above. You still need one -more step (if and only if you have original U-Boot), i.e. run the -following command: - -$ truncate -s %4096 u-boot.bin - -2. Run your board and interrupt booting to U-Boot console. In the console -call: - - => run do_force_flash_os - -3. Wait for few seconds, it will prepare environment variable and runs -DFU. Run DFU command from the host system: - -$ dfu-util -v -d 8087:0a99 --alt u-boot0 -D u-boot.bin - -4. Return to U-Boot console and following hint. i.e. push Ctrl+C, and -reset the board: - - => reset - CPU Microcode ------------- Modern CPUs usually require a special bit stream called microcode [8] to be diff --git a/doc/board/intel/edison.rst b/doc/board/intel/edison.rst new file mode 100644 index 0000000000..1aee2a1fc0 --- /dev/null +++ b/doc/board/intel/edison.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +Edison +====== + +Build Instructions for U-Boot as main bootloader +------------------------------------------------ + +Simple you can build U-Boot and obtain u-boot.bin:: + + $ make edison_defconfig + $ make all + +Updating U-Boot on Edison +------------------------- + +By default Intel Edison boards are shipped with preinstalled heavily +patched U-Boot v2014.04. Though it supports DFU which we may be able to +use. + +1. Prepare u-boot.bin as described in chapter above. You still need one + more step (if and only if you have original U-Boot), i.e. run the + following command:: + + $ truncate -s %4096 u-boot.bin + +2. Run your board and interrupt booting to U-Boot console. In the console + call:: + + => run do_force_flash_os + +3. Wait for few seconds, it will prepare environment variable and runs + DFU. Run DFU command from the host system:: + + $ dfu-util -v -d 8087:0a99 --alt u-boot0 -D u-boot.bin + +4. Return to U-Boot console and following hint. i.e. push Ctrl+C, and + reset the board:: + + => reset diff --git a/doc/board/intel/index.rst b/doc/board/intel/index.rst index 521e6e6baa..482e01b425 100644 --- a/doc/board/intel/index.rst +++ b/doc/board/intel/index.rst @@ -10,4 +10,5 @@ Intel cherryhill cougarcanyon2 crownbay + edison minnowmax |