diff options
| -rw-r--r-- | README | 2 | ||||
| -rw-r--r-- | cmd/Kconfig | 8 | ||||
| -rw-r--r-- | cmd/Makefile | 1 | ||||
| -rw-r--r-- | cmd/ide.c | 4 | ||||
| -rw-r--r-- | cmd/pcmcia.c | 341 | ||||
| -rw-r--r-- | common/board_r.c | 12 | ||||
| -rw-r--r-- | doc/README.marubun-pcmcia | 65 | ||||
| -rw-r--r-- | doc/README.ne2000 | 11 | ||||
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ne2000_base.c | 10 | ||||
| -rw-r--r-- | drivers/pcmcia/Kconfig | 0 | ||||
| -rw-r--r-- | drivers/pcmcia/Makefile | 6 | ||||
| -rw-r--r-- | drivers/pcmcia/marubun_pcmcia.c | 99 | ||||
| -rw-r--r-- | include/common.h | 2 | ||||
| -rw-r--r-- | include/pcmcia.h | 137 | ||||
| -rw-r--r-- | include/pcmcia/yenta.h | 156 | ||||
| -rw-r--r-- | scripts/config_whitelist.txt | 6 |
18 files changed, 1 insertions, 862 deletions
@@ -83,7 +83,7 @@ Where we come from: * Provide extended interface to Linux boot loader * S-Record download * network boot - * PCMCIA / CompactFlash / ATA disk / SCSI ... boot + * ATA disk / SCSI ... boot - create ARMBoot project (http://sourceforge.net/projects/armboot) - add other CPU families (starting with ARM) - create U-Boot project (http://sourceforge.net/projects/u-boot) diff --git a/cmd/Kconfig b/cmd/Kconfig index 22a3737b4e..041de1d831 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1042,14 +1042,6 @@ config CMD_PCI peripherals. Sub-commands allow bus enumeration, displaying and changing configuration space and a few other features. -config CMD_PCMCIA - bool "pinit - Set up PCMCIA device" - help - Provides a means to initialise a PCMCIA (Personal Computer Memory - Card International Association) device. This is an old standard from - about 1990. These devices are typically removable memory or network - cards using a standard 68-pin connector. - config CMD_PINMUX bool "pinmux - show pins muxing" default y if PINCTRL diff --git a/cmd/Makefile b/cmd/Makefile index 43a6b0ee21..58827b5679 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -106,7 +106,6 @@ obj-$(CONFIG_CMD_PART) += part.o ifdef CONFIG_PCI obj-$(CONFIG_CMD_PCI) += pci.o endif -obj-$(CONFIG_CMD_PCMCIA) += pcmcia.o obj-$(CONFIG_CMD_PINMUX) += pinmux.o obj-$(CONFIG_CMD_PXE) += pxe.o obj-$(CONFIG_CMD_WOL) += wol.o @@ -17,10 +17,6 @@ #include <asm/byteorder.h> #include <asm/io.h> -#if defined(CONFIG_IDE_PCMCIA) -# include <pcmcia.h> -#endif - #include <ide.h> #include <ata.h> diff --git a/cmd/pcmcia.c b/cmd/pcmcia.c deleted file mode 100644 index 3b7537b105..0000000000 --- a/cmd/pcmcia.c +++ /dev/null @@ -1,341 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - ******************************************************************** - * - * Lots of code copied from: - * - * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. - * (C) 1999-2000 Magnus Damm <damm@bitsmart.com> - * - * "The ExCA standard specifies that socket controllers should provide - * two IO and five memory windows per socket, which can be independently - * configured and positioned in the host address space and mapped to - * arbitrary segments of card address space. " - David A Hinds. 1999 - * - * This controller does _not_ meet the ExCA standard. - * - * m8xx pcmcia controller brief info: - * + 8 windows (attrib, mem, i/o) - * + up to two slots (SLOT_A and SLOT_B) - * + inputpins, outputpins, event and mask registers. - * - no offset register. sigh. - * - * Because of the lacking offset register we must map the whole card. - * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. - * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO - * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. - * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. - * They are maximum 64KByte each... - */ - -/* #define DEBUG 1 */ - -/* - * PCMCIA support - */ -#include <common.h> -#include <command.h> -#include <config.h> -#include <pcmcia.h> -#include <asm/io.h> - -/* -------------------------------------------------------------------- */ - -#if defined(CONFIG_CMD_PCMCIA) - -extern int pcmcia_on (void); -extern int pcmcia_off (void); - -int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 0; - - if (argc != 2) { - printf ("Usage: pinit {on | off}\n"); - return 1; - } - if (strcmp(argv[1],"on") == 0) { - rcode = pcmcia_on (); - } else if (strcmp(argv[1],"off") == 0) { - rcode = pcmcia_off (); - } else { - printf ("Usage: pinit {on | off}\n"); - return 1; - } - - return rcode; -} - -U_BOOT_CMD( - pinit, 2, 0, do_pinit, - "PCMCIA sub-system", - "on - power on PCMCIA socket\n" - "pinit off - power off PCMCIA socket" -); - -#endif - -/* -------------------------------------------------------------------- */ - -#undef CHECK_IDE_DEVICE - -#if defined(CONFIG_PXA_PCMCIA) -#define CHECK_IDE_DEVICE -#endif - -#ifdef CHECK_IDE_DEVICE - -int ide_devices_found; -static uchar *known_cards[] = { - (uchar *)"ARGOSY PnPIDE D5", - NULL -}; - -#define MAX_TUPEL_SZ 512 -#define MAX_FEATURES 4 - -#define MAX_IDENT_CHARS 64 -#define MAX_IDENT_FIELDS 4 - -#define indent "\t " - -static void print_funcid (int func) -{ - puts (indent); - switch (func) { - case CISTPL_FUNCID_MULTI: - puts (" Multi-Function"); - break; - case CISTPL_FUNCID_MEMORY: - puts (" Memory"); - break; - case CISTPL_FUNCID_SERIAL: - puts (" Serial Port"); - break; - case CISTPL_FUNCID_PARALLEL: - puts (" Parallel Port"); - break; - case CISTPL_FUNCID_FIXED: - puts (" Fixed Disk"); - break; - case CISTPL_FUNCID_VIDEO: - puts (" Video Adapter"); - break; - case CISTPL_FUNCID_NETWORK: - puts (" Network Adapter"); - break; - case CISTPL_FUNCID_AIMS: - puts (" AIMS Card"); - break; - case CISTPL_FUNCID_SCSI: - puts (" SCSI Adapter"); - break; - default: - puts (" Unknown"); - break; - } - puts (" Card\n"); -} - -static void print_fixed (volatile uchar *p) -{ - if (p == NULL) - return; - - puts(indent); - - switch (*p) { - case CISTPL_FUNCE_IDE_IFACE: - { uchar iface = *(p+2); - - puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown"); - puts (" interface "); - break; - } - case CISTPL_FUNCE_IDE_MASTER: - case CISTPL_FUNCE_IDE_SLAVE: - { uchar f1 = *(p+2); - uchar f2 = *(p+4); - - puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]"); - - if (f1 & CISTPL_IDE_UNIQUE) - puts (" [unique]"); - - puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]"); - - if (f2 & CISTPL_IDE_HAS_SLEEP) - puts (" [sleep]"); - - if (f2 & CISTPL_IDE_HAS_STANDBY) - puts (" [standby]"); - - if (f2 & CISTPL_IDE_HAS_IDLE) - puts (" [idle]"); - - if (f2 & CISTPL_IDE_LOW_POWER) - puts (" [low power]"); - - if (f2 & CISTPL_IDE_REG_INHIBIT) - puts (" [reg inhibit]"); - - if (f2 & CISTPL_IDE_HAS_INDEX) - puts (" [index]"); - - if (f2 & CISTPL_IDE_IOIS16) - puts (" [IOis16]"); - - break; - } - } - putc ('\n'); -} - -static int identify (volatile uchar *p) -{ - uchar id_str[MAX_IDENT_CHARS]; - uchar data; - uchar *t; - uchar **card; - int i, done; - - if (p == NULL) - return (0); /* Don't know */ - - t = id_str; - done =0; - - for (i=0; i<=4 && !done; ++i, p+=2) { - while ((data = *p) != '\0') { - if (data == 0xFF) { - done = 1; - break; - } - *t++ = data; - if (t == &id_str[MAX_IDENT_CHARS-1]) { - done = 1; - break; - } - p += 2; - } - if (!done) - *t++ = ' '; - } - *t = '\0'; - while (--t > id_str) { - if (*t == ' ') - *t = '\0'; - else - break; - } - puts ((char *)id_str); - putc ('\n'); - - for (card=known_cards; *card; ++card) { - debug ("## Compare against \"%s\"\n", *card); - if (strcmp((char *)*card, (char *)id_str) == 0) { /* found! */ - debug ("## CARD FOUND ##\n"); - return (1); - } - } - - return (0); /* don't know */ -} - -int check_ide_device (int slot) -{ - volatile uchar *ident = NULL; - volatile uchar *feature_p[MAX_FEATURES]; - volatile uchar *p, *start, *addr; - int n_features = 0; - uchar func_id = ~0; - uchar code, len; - ushort config_base = 0; - int found = 0; - int i; - - addr = (volatile uchar *)(CONFIG_SYS_PCMCIA_MEM_ADDR + - CONFIG_SYS_PCMCIA_MEM_SIZE * (slot * 4)); - debug ("PCMCIA MEM: %08lX\n", (ulong)addr); - - start = p = (volatile uchar *) addr; - - while ((p - start) < MAX_TUPEL_SZ) { - - code = *p; p += 2; - - if (code == 0xFF) { /* End of chain */ - break; - } - - len = *p; p += 2; -#if defined(DEBUG) && (DEBUG > 1) - { volatile uchar *q = p; - printf ("\nTuple code %02x length %d\n\tData:", - code, len); - - for (i = 0; i < len; ++i) { - printf (" %02x", *q); - q+= 2; - } - } -#endif /* DEBUG */ - switch (code) { - case CISTPL_VERS_1: - ident = p + 4; - break; - case CISTPL_FUNCID: - /* Fix for broken SanDisk which may have 0x80 bit set */ - func_id = *p & 0x7F; - break; - case CISTPL_FUNCE: - if (n_features < MAX_FEATURES) - feature_p[n_features++] = p; - break; - case CISTPL_CONFIG: - config_base = (*(p+6) << 8) + (*(p+4)); - debug ("\n## Config_base = %04x ###\n", config_base); - default: - break; - } - p += 2 * len; - } - - found = identify (ident); - - if (func_id != ((uchar)~0)) { - print_funcid (func_id); - - if (func_id == CISTPL_FUNCID_FIXED) - found = 1; - else - return (1); /* no disk drive */ - } - - for (i=0; i<n_features; ++i) { - print_fixed (feature_p[i]); - } - - if (!found) { - printf ("unknown card type\n"); - return (1); - } - - ide_devices_found |= (1 << slot); - - /* set I/O area in config reg -> only valid for ARGOSY D5!!! */ - *((uchar *)(addr + config_base)) = 1; -#if 0 - printf("\n## Config_base = %04x ###\n", config_base); - printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base); - printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2)); - printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4)); - printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6)); -#endif - return (0); -} - -#endif /* CHECK_IDE_DEVICE */ diff --git a/common/board_r.c b/common/board_r.c index 1dabf5a11c..b7f68bba4a 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -583,15 +583,6 @@ static int initr_post(void) } #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE) -static int initr_pcmcia(void) -{ - puts("PCMCIA:"); - pcmcia_init(); - return 0; -} -#endif - #if defined(CONFIG_IDE) && !defined(CONFIG_BLK) static int initr_ide(void) { @@ -820,9 +811,6 @@ static init_fnc_t init_sequence_r[] = { #ifdef CONFIG_POST initr_post, #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE) - initr_pcmcia, -#endif #if defined(CONFIG_IDE) && !defined(CONFIG_BLK) initr_ide, #endif diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia deleted file mode 100644 index 0a363b2ada..0000000000 --- a/doc/README.marubun-pcmcia +++ /dev/null @@ -1,65 +0,0 @@ - -U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver - Last update 21/11/2007 by Nobuhiro Iwamatsu - -======================================================================================== - -0. What's this? - This driver supports MARUBUN MR-SHPC-01. - url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html - (Sorry Japanese only.) - - This chip is used with SuperH well, and adopted by the - reference board. - ex. * MS7750SE01 - * MS7722SE01 - * other - - This chip doesn't support CardBus. - -1. base source code - The code is based on sources from the Linux kernel - ( arch/sh/kernel/cf-enabler.c ). - -2. How to use - The options you have to specify in the config file are (with the - value for my board as an example): - - * CONFIG_MARUBUN_PCCARD - If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD. - ex. #define CONFIG_MARUBUN_PCCARD - - * CONFIG_PCMCIA_SLOT_A - Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A . - ex. #define CONFIG_PCMCIA_SLOT_A 1 - - * CONFIG_SYS_MARUBUN_MRSHPC - This is MR-SHPC-01 PCMCIA controller base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0 - ( for MS7722SE01 environment ) - - * CONFIG_SYS_MARUBUN_MW1 - This is MR-SHPC-01 memory window base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000 - ( for MS7722SE01 environment ) - - * CONFIG_SYS_MARUBUN_MW1 - This is MR-SHPC-01 attribute window base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000 - ( for MS7722SE01 environment ) - - * CONFIG_SYS_MARUBUN_MW1 - This is MR-SHPC-01 I/O window base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_IO 0xb0600000 - ( for MS7722SE01 environment ) - -3. Other - * Check Compact Flash only. - * Maybe, NE2000 compatible NIC is sure to move. - -Copyright (c) 2007 - Nobuhiro Iwamatsu <iwamatsu@nigaur.org> diff --git a/doc/README.ne2000 b/doc/README.ne2000 index d5ae9a9eb1..0f6a2e04ff 100644 --- a/doc/README.ne2000 +++ b/doc/README.ne2000 @@ -21,17 +21,6 @@ value for my board as an example): - Address where the board is mapped -#define CONFIG_DRIVER_NE2000_CCR (0x28000000+0x3f8) - -- Address of the CCR (card configuration register). It could be found -by enabling DEBUG in cmd_pcmcia.c. If this is not defined nothing is -done as far as PCMCIA support is concerned. - -#define CONFIG_DRIVER_NE2000_VAL (0x20) - -- The value to be written in the CCR. It selects among different I/O -spaces that could be used by the card. - Enjoy! diff --git a/drivers/Kconfig b/drivers/Kconfig index 5a9d01b508..350acf81f3 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -70,8 +70,6 @@ source "drivers/pci_endpoint/Kconfig" source "drivers/pch/Kconfig" -source "drivers/pcmcia/Kconfig" - source "drivers/phy/Kconfig" source "drivers/phy/allwinner/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 41933605ce..a4bb5e4975 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -88,7 +88,6 @@ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_NVME) += nvme/ obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ -obj-y += pcmcia/ obj-y += dfu/ obj-$(CONFIG_PCH) += pch/ obj-y += phy/allwinner/ diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c index 819a246070..a240d06ad4 100644 --- a/drivers/net/ne2000_base.c +++ b/drivers/net/ne2000_base.c @@ -693,16 +693,6 @@ static int ne2k_setup_driver(struct eth_device *dev) } } -#ifdef CONFIG_DRIVER_NE2000_CCR - { - vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR; - - PRINTK("CCR before is %x\n", *p); - *p = CONFIG_DRIVER_NE2000_VAL; - PRINTK("CCR after is %x\n", *p); - } -#endif - nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE; nic.data = nic.base + DP_DATA; diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig deleted file mode 100644 index e69de29bb2..0000000000 --- a/drivers/pcmcia/Kconfig +++ /dev/null diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile deleted file mode 100644 index 8374a56c34..0000000000 --- a/drivers/pcmcia/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c deleted file mode 100644 index b2eea6c601..0000000000 --- a/drivers/pcmcia/marubun_pcmcia.c +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Marubun MR-SHPC-01 PCMCIA controller device driver - * - * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - */ - -#include <common.h> -#include <config.h> -#include <pcmcia.h> -#include <asm/io.h> - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_IDE) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_PCMCIA) - -/* MR-SHPC-01 register */ -#define MRSHPC_MODE (CONFIG_SYS_MARUBUN_MRSHPC + 4) -#define MRSHPC_OPTION (CONFIG_SYS_MARUBUN_MRSHPC + 6) -#define MRSHPC_CSR (CONFIG_SYS_MARUBUN_MRSHPC + 8) -#define MRSHPC_ISR (CONFIG_SYS_MARUBUN_MRSHPC + 10) -#define MRSHPC_ICR (CONFIG_SYS_MARUBUN_MRSHPC + 12) -#define MRSHPC_CPWCR (CONFIG_SYS_MARUBUN_MRSHPC + 14) -#define MRSHPC_MW0CR1 (CONFIG_SYS_MARUBUN_MRSHPC + 16) -#define MRSHPC_MW1CR1 (CONFIG_SYS_MARUBUN_MRSHPC + 18) -#define MRSHPC_IOWCR1 (CONFIG_SYS_MARUBUN_MRSHPC + 20) -#define MRSHPC_MW0CR2 (CONFIG_SYS_MARUBUN_MRSHPC + 22) -#define MRSHPC_MW1CR2 (CONFIG_SYS_MARUBUN_MRSHPC + 24) -#define MRSHPC_IOWCR2 (CONFIG_SYS_MARUBUN_MRSHPC + 26) -#define MRSHPC_CDCR (CONFIG_SYS_MARUBUN_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (CONFIG_SYS_MARUBUN_MRSHPC + 30) - -int pcmcia_on (void) -{ - printf("Enable PCMCIA " PCMCIA_SLOT_MSG "\n"); - - /* Init */ - outw( 0x0000 , MRSHPC_MODE ); - - if ((inw(MRSHPC_CSR) & 0x000c) == 0){ /* if card detect is true */ - if ((inw(MRSHPC_CSR) & 0x0080) == 0){ - outw(0x0674 ,MRSHPC_CPWCR); /* Card Vcc is 3.3v? */ - }else{ - outw(0x0678 ,MRSHPC_CPWCR); /* Card Vcc is 5V */ - } - udelay( 100000 ); /* wait for power on */ - }else{ - return 1; - } - /* - * PC-Card window open - * flag == COMMON/ATTRIBUTE/IO - */ - /* common window open */ - outw(0x8a84,MRSHPC_MW0CR1); /* window 0xb8400000 */ - if ((inw(MRSHPC_CSR) & 0x4000) != 0) - outw(0x0b00,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 1 */ - else - outw(0x0300,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 0 */ - - /* attribute window open */ - outw(0x8a85,MRSHPC_MW1CR1); /* window 0xb8500000 */ - if ((inw(MRSHPC_CSR) & 0x4000) != 0) - outw(0x0a00,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 1 */ - else - outw(0x0200,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 0 */ - - /* I/O window open */ - outw(0x8a86,MRSHPC_IOWCR1); /* I/O window 0xb8600000 */ - outw(0x0008,MRSHPC_CDCR); /* I/O card mode */ - if ((inw(MRSHPC_CSR) & 0x4000) != 0) - outw(0x0a00,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1 */ - else - outw(0x0200,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0 */ - - outw(0x0000,MRSHPC_ISR); - outw(0x2000,MRSHPC_ICR); - outb(0x00,(CONFIG_SYS_MARUBUN_MW2 + 0x206)); - outb(0x42,(CONFIG_SYS_MARUBUN_MW2 + 0x200)); - - return 0; -} - -int pcmcia_off (void) -{ - printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n"); - - return 0; -} - -#endif /* CONFIG_PCMCIA */ diff --git a/include/common.h b/include/common.h index f8afbc0d70..2645ac9615 100644 --- a/include/common.h +++ b/include/common.h @@ -339,8 +339,6 @@ static inline struct in_addr env_get_ip(char *var) return string_to_ip(env_get(var)); } -int pcmcia_init (void); - #ifdef CONFIG_LED_STATUS # include <status_led.h> #endif diff --git a/include/pcmcia.h b/include/pcmcia.h deleted file mode 100644 index 89e528efb9..0000000000 --- a/include/pcmcia.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#ifndef _PCMCIA_H -#define _PCMCIA_H - -#include <common.h> -#include <config.h> - -/* - * Allow configuration to select PCMCIA slot, - * or try to generate a useful default - */ -#if defined(CONFIG_CMD_PCMCIA) - -#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) -# error "PCMCIA Slot not configured" -#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */ - -/* Make sure exactly one slot is defined - we support only one for now */ -#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) -#error Neither CONFIG_PCMCIA_SLOT_A nor CONFIG_PCMCIA_SLOT_B configured -#endif -#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B) -#error Both CONFIG_PCMCIA_SLOT_A and CONFIG_PCMCIA_SLOT_B configured -#endif - -#ifndef PCMCIA_SOCKETS_NO -#define PCMCIA_SOCKETS_NO 1 -#endif -#ifndef PCMCIA_MEM_WIN_NO -#define PCMCIA_MEM_WIN_NO 4 -#endif -#define PCMCIA_IO_WIN_NO 2 - -/* define _slot_ to be able to optimize macros */ -#ifdef CONFIG_PCMCIA_SLOT_A -# define _slot_ 0 -# define PCMCIA_SLOT_MSG "slot A" -# define PCMCIA_SLOT_x PCMCIA_PSLOT_A -#else -# define _slot_ 1 -# define PCMCIA_SLOT_MSG "slot B" -# define PCMCIA_SLOT_x PCMCIA_PSLOT_B -#endif - -/* - * This structure is used to address each window in the PCMCIA controller. - * - * Keep in mind that we assume that pcmcia_win_t[n+1] is mapped directly - * after pcmcia_win_t[n]... - */ - -typedef struct { - ulong br; - ulong or; -} pcmcia_win_t; - -/**********************************************************************/ - -/* - * CIS Tupel codes - */ -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_INDIRECT 0x03 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_PWR_MGMNT 0x08 -#define CISTPL_EXTDEVICE 0x09 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* - * CIS Function ID codes - */ -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -/* - * Fixed Disk FUNCE codes - */ -#define CISTPL_IDE_INTERFACE 0x01 - -#define CISTPL_FUNCE_IDE_IFACE 0x01 -#define CISTPL_FUNCE_IDE_MASTER 0x02 -#define CISTPL_FUNCE_IDE_SLAVE 0x03 - -/* First feature byte */ -#define CISTPL_IDE_SILICON 0x04 -#define CISTPL_IDE_UNIQUE 0x08 -#define CISTPL_IDE_DUAL 0x10 - -/* Second feature byte */ -#define CISTPL_IDE_HAS_SLEEP 0x01 -#define CISTPL_IDE_HAS_STANDBY 0x02 -#define CISTPL_IDE_HAS_IDLE 0x04 -#define CISTPL_IDE_LOW_POWER 0x08 -#define CISTPL_IDE_REG_INHIBIT 0x10 -#define CISTPL_IDE_HAS_INDEX 0x20 -#define CISTPL_IDE_IOIS16 0x40 - -#endif - -#endif /* _PCMCIA_H */ diff --git a/include/pcmcia/yenta.h b/include/pcmcia/yenta.h deleted file mode 100644 index 5cd58a7da3..0000000000 --- a/include/pcmcia/yenta.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * yenta.h 1.20 2001/08/24 12:15:34 - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use - * your version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#ifndef _LINUX_YENTA_H -#define _LINUX_YENTA_H - -/* PCI Configuration Registers */ - -#define PCI_STATUS_CAPLIST 0x10 -#define PCI_CB_CAPABILITY_POINTER 0x14 /* 8 bit */ -#define PCI_CAPABILITY_ID 0x00 /* 8 bit */ -#define PCI_CAPABILITY_PM 0x01 -#define PCI_NEXT_CAPABILITY 0x01 /* 8 bit */ -#define PCI_PM_CAPABILITIES 0x02 /* 16 bit */ -#define PCI_PMCAP_PME_D3COLD 0x8000 -#define PCI_PMCAP_PME_D3HOT 0x4000 -#define PCI_PMCAP_PME_D2 0x2000 -#define PCI_PMCAP_PME_D1 0x1000 -#define PCI_PMCAP_PME_D0 0x0800 -#define PCI_PMCAP_D2_CAP 0x0400 -#define PCI_PMCAP_D1_CAP 0x0200 -#define PCI_PMCAP_DYN_DATA 0x0100 -#define PCI_PMCAP_DSI 0x0020 -#define PCI_PMCAP_AUX_PWR 0x0010 -#define PCI_PMCAP_PMECLK 0x0008 -#define PCI_PMCAP_VERSION_MASK 0x0007 -#define PCI_PM_CONTROL_STATUS 0x04 /* 16 bit */ -#define PCI_PMCS_PME_STATUS 0x8000 -#define PCI_PMCS_DATASCALE_MASK 0x6000 -#define PCI_PMCS_DATASCALE_SHIFT 13 -#define PCI_PMCS_DATASEL_MASK 0x1e00 -#define PCI_PMCS_DATASEL_SHIFT 9 -#define PCI_PMCS_PME_ENABLE 0x0100 -#define PCI_PMCS_PWR_STATE_MASK 0x0003 -#define PCI_PMCS_PWR_STATE_D0 0x0000 -#define PCI_PMCS_PWR_STATE_D1 0x0001 -#define PCI_PMCS_PWR_STATE_D2 0x0002 -#define PCI_PMCS_PWR_STATE_D3 0x0003 -#define PCI_PM_BRIDGE_EXT 0x06 /* 8 bit */ -#define PCI_PM_DATA 0x07 /* 8 bit */ - -#define CB_PRIMARY_BUS 0x18 /* 8 bit */ -#define CB_CARDBUS_BUS 0x19 /* 8 bit */ -#define CB_SUBORD_BUS 0x1a /* 8 bit */ -#define CB_LATENCY_TIMER 0x1b /* 8 bit */ - -#define CB_MEM_BASE(m) (0x1c + 8*(m)) -#define CB_MEM_LIMIT(m) (0x20 + 8*(m)) -#define CB_IO_BASE(m) (0x2c + 8*(m)) -#define CB_IO_LIMIT(m) (0x30 + 8*(m)) - -#define CB_BRIDGE_CONTROL 0x3e /* 16 bit */ -#define CB_BCR_PARITY_ENA 0x0001 -#define CB_BCR_SERR_ENA 0x0002 -#define CB_BCR_ISA_ENA 0x0004 -#define CB_BCR_VGA_ENA 0x0008 -#define CB_BCR_MABORT 0x0020 -#define CB_BCR_CB_RESET 0x0040 -#define CB_BCR_ISA_IRQ 0x0080 -#define CB_BCR_PREFETCH(m) (0x0100 << (m)) -#define CB_BCR_WRITE_POST 0x0400 - -#define CB_LEGACY_MODE_BASE 0x44 - -/* Memory mapped registers */ - -#define CB_SOCKET_EVENT 0x0000 -#define CB_SE_CSTSCHG 0x00000001 -#define CB_SE_CCD 0x00000006 -#define CB_SE_CCD1 0x00000002 -#define CB_SE_CCD2 0x00000004 -#define CB_SE_PWRCYCLE 0x00000008 - -#define CB_SOCKET_MASK 0x0004 -#define CB_SM_CSTSCHG 0x00000001 -#define CB_SM_CCD 0x00000006 -#define CB_SM_PWRCYCLE 0x00000008 - -#define CB_SOCKET_STATE 0x0008 -#define CB_SS_CSTSCHG 0x00000001 -#define CB_SS_CCD 0x00000006 -#define CB_SS_CCD1 0x00000002 -#define CB_SS_CCD2 0x00000004 -#define CB_SS_PWRCYCLE 0x00000008 -#define CB_SS_16BIT 0x00000010 -#define CB_SS_32BIT 0x00000020 -#define CB_SS_CINT 0x00000040 -#define CB_SS_BADCARD 0x00000080 -#define CB_SS_DATALOST 0x00000100 -#define CB_SS_BADVCC 0x00000200 -#define CB_SS_5VCARD 0x00000400 -#define CB_SS_3VCARD 0x00000800 -#define CB_SS_XVCARD 0x00001000 -#define CB_SS_YVCARD 0x00002000 -#define CB_SS_VSENSE 0x00003c86 -#define CB_SS_5VSOCKET 0x10000000 -#define CB_SS_3VSOCKET 0x20000000 -#define CB_SS_XVSOCKET 0x40000000 -#define CB_SS_YVSOCKET 0x80000000 - -#define CB_SOCKET_FORCE 0x000c -#define CB_SF_CVSTEST 0x00004000 - -#define CB_SOCKET_CONTROL 0x0010 -#define CB_SC_VPP_MASK 0x00000007 -#define CB_SC_VPP_OFF 0x00000000 -#define CB_SC_VPP_12V 0x00000001 -#define CB_SC_VPP_5V 0x00000002 -#define CB_SC_VPP_3V 0x00000003 -#define CB_SC_VPP_XV 0x00000004 -#define CB_SC_VPP_YV 0x00000005 -#define CB_SC_VCC_MASK 0x00000070 -#define CB_SC_VCC_OFF 0x00000000 -#define CB_SC_VCC_5V 0x00000020 -#define CB_SC_VCC_3V 0x00000030 -#define CB_SC_VCC_XV 0x00000040 -#define CB_SC_VCC_YV 0x00000050 -#define CB_SC_CCLK_STOP 0x00000080 - -#define CB_SOCKET_POWER 0x0020 -#define CB_SP_CLK_CTRL 0x00000001 -#define CB_SP_CLK_CTRL_ENA 0x00010000 -#define CB_SP_CLK_MODE 0x01000000 -#define CB_SP_ACCESS 0x02000000 - -/* Address bits 31..24 for memory windows for 16-bit cards, - accessable only by memory mapping the 16-bit register set */ -#define CB_MEM_PAGE(map) (0x40 + (map)) - -#endif /* _LINUX_YENTA_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 53db749a65..d484a4bc2f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -362,8 +362,6 @@ CONFIG_DRIVER_DM9000 CONFIG_DRIVER_EP93XX_MAC CONFIG_DRIVER_NE2000 CONFIG_DRIVER_NE2000_BASE -CONFIG_DRIVER_NE2000_CCR -CONFIG_DRIVER_NE2000_VAL CONFIG_DRIVER_SMC911X_BASE CONFIG_DRIVER_TI_EMAC_USE_RMII CONFIG_DSP_CLUSTER_START @@ -1357,9 +1355,6 @@ CONFIG_PCI_SKIP_HOST_BRIDGE CONFIG_PCI_SYS_BUS CONFIG_PCI_SYS_PHYS CONFIG_PCI_SYS_SIZE -CONFIG_PCMCIA -CONFIG_PCMCIA_SLOT_A -CONFIG_PCMCIA_SLOT_B CONFIG_PCNET CONFIG_PCNET_79C973 CONFIG_PCNET_79C975 @@ -3704,7 +3699,6 @@ CONFIG_SYS_PCI_TBATR3 CONFIG_SYS_PCI_TBATR4 CONFIG_SYS_PCI_TBATR5 CONFIG_SYS_PCI_VIRT -CONFIG_SYS_PCMCIA_MEM_SIZE CONFIG_SYS_PDCNT CONFIG_SYS_PEHLPAR CONFIG_SYS_PEPAR |