nand: mxc: Add support for i.MX5

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

1 files changed, 65 insertions, 2 deletions

diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index 615e820bb6..1096727aed 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -30,12 +30,18 @@
 #include <asm/io.h>
 #include <fsl_nfc.h>
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
+#elif defined(MXC_NFC_V3_2)
+static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
+static struct fsl_nfc_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
+#endif
 
 static void nfc_wait_ready(void)
 {
 	uint32_t tmp;
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT))
 		;
 
@@ -43,11 +49,56 @@ static void nfc_wait_ready(void)
 	tmp = readnfc(&nfc->config2);
 	tmp &= ~NFC_V1_V2_CONFIG2_INT;
 	writenfc(tmp, &nfc->config2);
+#elif defined(MXC_NFC_V3_2)
+	while (!(readnfc(&nfc_ip->ipc) & NFC_V3_IPC_INT))
+		;
+
+	/* Reset interrupt flag */
+	tmp = readnfc(&nfc_ip->ipc);
+	tmp &= ~NFC_V3_IPC_INT;
+	writenfc(tmp, &nfc_ip->ipc);
+#endif
 }
 
 static void nfc_nand_init(void)
 {
-#if defined(MXC_NFC_V2_1)
+#if defined(MXC_NFC_V3_2)
+	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+	int tmp;
+
+	tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
+			NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
+		NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_SPARE_SIZE / 2) |
+		NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
+		NFC_V3_CONFIG2_ONE_CYCLE;
+	if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
+		tmp |= NFC_V3_CONFIG2_PS_4096;
+	else if (CONFIG_SYS_NAND_PAGE_SIZE == 2048)
+		tmp |= NFC_V3_CONFIG2_PS_2048;
+	else if (CONFIG_SYS_NAND_PAGE_SIZE == 512)
+		tmp |= NFC_V3_CONFIG2_PS_512;
+	/*
+	 * if spare size is larger that 16 bytes per 512 byte hunk
+	 * then use 8 symbol correction instead of 4
+	 */
+	if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+		tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
+	else
+		tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
+	writenfc(tmp, &nfc_ip->config2);
+
+	tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+#ifndef CONFIG_SYS_NAND_BUSWIDTH_16
+	tmp |= NFC_V3_CONFIG3_FW8;
+#endif
+	writenfc(tmp, &nfc_ip->config3);
+
+	writenfc(0, &nfc_ip->delay_line);
+#elif defined(MXC_NFC_V2_1)
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 	int config1;
 
@@ -123,7 +174,13 @@ static void nfc_nand_data_output(void)
 	int i;
 #endif
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	writenfc(0, &nfc->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	int config1 = readnfc(&nfc->config1);
+	config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(config1, &nfc->config1);
+#endif
 	writenfc(NFC_OUTPUT, &nfc->operation);
 	nfc_wait_ready();
 #ifdef NAND_MXC_2K_MULTI_CYCLE
@@ -144,7 +201,7 @@ static int nfc_nand_check_ecc(void)
 #if defined(MXC_NFC_V1)
 	u16 ecc_status = readw(&nfc->ecc_status_result);
 	return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2;
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 	u32 ecc_status = readl(&nfc->ecc_status_result);
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 	int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;
@@ -163,7 +220,13 @@ static int nfc_nand_check_ecc(void)
 static void nfc_nand_read_page(unsigned int page_address)
 {
 	/* read in first 0 buffer */
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	writenfc(0, &nfc->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	int config1 = readnfc(&nfc->config1);
+	config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(config1, &nfc->config1);
+#endif
 	nfc_nand_command(NAND_CMD_READ0);
 	nfc_nand_page_address(page_address);