diff options
| author | Stefano Babic <sbabic@denx.de> | 2014-07-16 08:51:30 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-07-16 08:51:30 +0200 |
| commit | dab5e3469d294a4e1ffed8407d296a78e02cc01f (patch) | |
| tree | c6378034591210b3142ca3add806d52c6ea22b3b /include | |
| parent | 14a1613140519a8d0a88e6054c302a8cb3e067a5 (diff) | |
| parent | 524123a70761110c5cf3ccc5f52f6d4da071b959 (diff) | |
| download | u-boot-dab5e3469d294a4e1ffed8407d296a78e02cc01f.tar.gz | |
Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
Conflicts:
boards.cfg
Diffstat (limited to 'include')
160 files changed, 2307 insertions, 10141 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index e98b661e35..2850ed8a69 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -65,7 +65,7 @@ typedef struct global_data { struct global_data *new_gd; /* relocated global data */ #ifdef CONFIG_DM - struct device *dm_root; /* Root instance for Driver Model */ + struct udevice *dm_root;/* Root instance for Driver Model */ struct list_head uclass_root; /* Head of core tree */ #endif diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index e325df40d9..a6e52a0de6 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -86,7 +86,7 @@ enum { GPIOF_UNKNOWN, }; -struct device; +struct udevice; /** * struct struct dm_gpio_ops - Driver model GPIO operations @@ -116,15 +116,15 @@ struct device; * all devices. Be careful not to confuse offset with gpio in the parameters. */ struct dm_gpio_ops { - int (*request)(struct device *dev, unsigned offset, const char *label); - int (*free)(struct device *dev, unsigned offset); - int (*direction_input)(struct device *dev, unsigned offset); - int (*direction_output)(struct device *dev, unsigned offset, + int (*request)(struct udevice *dev, unsigned offset, const char *label); + int (*free)(struct udevice *dev, unsigned offset); + int (*direction_input)(struct udevice *dev, unsigned offset); + int (*direction_output)(struct udevice *dev, unsigned offset, int value); - int (*get_value)(struct device *dev, unsigned offset); - int (*set_value)(struct device *dev, unsigned offset, int value); - int (*get_function)(struct device *dev, unsigned offset); - int (*get_state)(struct device *dev, unsigned offset, char *state, + int (*get_value)(struct udevice *dev, unsigned offset); + int (*set_value)(struct udevice *dev, unsigned offset, int value); + int (*get_function)(struct udevice *dev, unsigned offset); + int (*get_state)(struct udevice *dev, unsigned offset, char *state, int maxlen); }; @@ -166,7 +166,7 @@ struct gpio_dev_priv { * @offset_count: Returns number of GPIOs within this bank * @return bank name of this device */ -const char *gpio_get_bank_info(struct device *dev, int *offset_count); +const char *gpio_get_bank_info(struct udevice *dev, int *offset_count); /** * gpio_lookup_name - Look up a GPIO name and return its details @@ -179,7 +179,7 @@ const char *gpio_get_bank_info(struct device *dev, int *offset_count); * @offsetp: Returns the offset number within this device * @gpiop: Returns the absolute GPIO number, numbered from 0 */ -int gpio_lookup_name(const char *name, struct device **devp, +int gpio_lookup_name(const char *name, struct udevice **devp, unsigned int *offsetp, unsigned int *gpiop); #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/include/autoboot.h b/include/autoboot.h new file mode 100644 index 0000000000..3a9059a0b9 --- /dev/null +++ b/include/autoboot.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Add to readline cmdline-editing by + * (C) Copyright 2005 + * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __AUTOBOOT_H +#define __AUTOBOOT_H + +#ifdef CONFIG_BOOTDELAY +/** + * bootdelay_process() - process the bootd delay + * + * Process the boot delay, boot limit, then get the value of either + * bootcmd, failbootcmd or altbootcmd depending on the current state. + * Return this command so it can be executed. + * + * @return command to executed + */ +const char *bootdelay_process(void); + +/** + * autoboot_command() - run the autoboot command + * + * If enabled, run the autoboot command returned from bootdelay_process(). + * Also do the CONFIG_MENUKEY processing if enabled. + * + * @cmd: Command to run + */ +void autoboot_command(const char *cmd); +#else +static inline const char *bootdelay_process(void) +{ + return NULL; +} + +static inline void autoboot_command(const char *s) +{ +} +#endif + +#endif diff --git a/include/bootm.h b/include/bootm.h new file mode 100644 index 0000000000..4a308d8115 --- /dev/null +++ b/include/bootm.h @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOOTM_H +#define _BOOTM_H + +#include <command.h> +#include <image.h> + +#define BOOTM_ERR_RESET (-1) +#define BOOTM_ERR_OVERLAP (-2) +#define BOOTM_ERR_UNIMPLEMENTED (-3) + +/* + * Continue booting an OS image; caller already has: + * - copied image header to global variable `header' + * - checked header magic number, checksums (both header & image), + * - verified image architecture (PPC) and type (KERNEL or MULTI), + * - loaded (first part of) image to header load address, + * - disabled interrupts. + * + * @flag: Flags indicating what to do (BOOTM_STATE_...) + * @argc: Number of arguments. Note that the arguments are shifted down + * so that 0 is the first argument not processed by U-Boot, and + * argc is adjusted accordingly. This avoids confusion as to how + * many arguments are available for the OS. + * @images: Pointers to os/initrd/fdt + * @return 1 on error. On success the OS boots so this function does + * not return. + */ +typedef int boot_os_fn(int flag, int argc, char * const argv[], + bootm_headers_t *images); + +extern boot_os_fn do_bootm_linux; +int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +void lynxkdi_boot(image_header_t *hdr); + +boot_os_fn *bootm_os_get_boot_func(int os); + +int bootm_host_load_images(const void *fit, int cfg_noffset); + +int boot_selected_os(int argc, char * const argv[], int state, + bootm_headers_t *images, boot_os_fn *boot_fn); + +ulong bootm_disable_interrupts(void); + +/* This is a special function used by bootz */ +int bootm_find_ramdisk_fdt(int flag, int argc, char * const argv[]); + +int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int states, bootm_headers_t *images, int boot_progress); + +#endif diff --git a/include/bootretry.h b/include/bootretry.h new file mode 100644 index 0000000000..2ecd7a48b0 --- /dev/null +++ b/include/bootretry.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BOOTRETRY_H +#define __BOOTRETRY_H + +#ifdef CONFIG_BOOT_RETRY_TIME +/** + * bootretry_tstc_timeout() - ensure we get a keypress before timeout + * + * Check for a keypress repeatedly, resetting the watchdog each time. If a + * keypress is not received within the command timeout, return an error. + * + * @return 0 if a key is received in time, -ETIMEDOUT if not + */ +int bootretry_tstc_timeout(void); + +/** + * bootretry_init_cmd_timeout() - set up command timeout + * + * Get the required command timeout from the environment. + */ +void bootretry_init_cmd_timeout(void); + +/** + * bootretry_reset_cmd_timeout() - reset command timeout + * + * Reset the command timeout so that the user has a fresh start. This is + * typically used when input is received from the user. + */ +void bootretry_reset_cmd_timeout(void); + +/** bootretry_dont_retry() - Indicate that we should not retry the boot */ +void bootretry_dont_retry(void); +#else +static inline int bootretry_tstc_timeout(void) +{ + return 0; +} + +static inline void bootretry_init_cmd_timeout(void) +{ +} + +static inline void bootretry_reset_cmd_timeout(void) +{ +} + +static inline void bootretry_dont_retry(void) +{ +} + +#endif + +#endif diff --git a/include/cli.h b/include/cli.h new file mode 100644 index 0000000000..699426252c --- /dev/null +++ b/include/cli.h @@ -0,0 +1,149 @@ +/* + * (C) Copyright 2014 Google, Inc + * Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CLI_H +#define __CLI_H + +/** + * Go into the command loop + * + * This will return if we get a timeout waiting for a command. See + * CONFIG_BOOT_RETRY_TIME. + */ +void cli_simple_loop(void); + +/** + * cli_simple_run_command() - Execute a command with the simple CLI + * + * @cmd: String containing the command to execute + * @flag Flag value - see CMD_FLAG_... + * @return 1 - command executed, repeatable + * 0 - command executed but not repeatable, interrupted commands are + * always considered not repeatable + * -1 - not executed (unrecognized, bootd recursion or too many args) + * (If cmd is NULL or "" or longer than CONFIG_SYS_CBSIZE-1 it is + * considered unrecognized) + */ +int cli_simple_run_command(const char *cmd, int flag); + +/** + * cli_simple_run_command_list() - Execute a list of command + * + * The commands should be separated by ; or \n and will be executed + * by the built-in parser. + * + * This function cannot take a const char * for the command, since if it + * finds newlines in the string, it replaces them with \0. + * + * @param cmd String containing list of commands + * @param flag Execution flags (CMD_FLAG_...) + * @return 0 on success, or != 0 on error. + */ +int cli_simple_run_command_list(char *cmd, int flag); + +/** + * cli_readline() - read a line into the console_buffer + * + * This is a convenience function which calls cli_readline_into_buffer(). + * + * @prompt: Prompt to display + * @return command line length excluding terminator, or -ve on error + */ +int cli_readline(const char *const prompt); + +/** + * readline_into_buffer() - read a line into a buffer + * + * Display the prompt, then read a command line into @buffer. The + * maximum line length is CONFIG_SYS_CBSIZE including a \0 terminator, which + * will always be added. + * + * The command is echoed as it is typed. Command editing is supported if + * CONFIG_CMDLINE_EDITING is defined. Tab auto-complete is supported if + * CONFIG_AUTO_COMPLETE is defined. If CONFIG_BOOT_RETRY_TIME is defined, + * then a timeout will be applied. + * + * If CONFIG_BOOT_RETRY_TIME is defined and retry_time >= 0, + * time out when time goes past endtime (timebase time in ticks). + * + * @prompt: Prompt to display + * @buffer: Place to put the line that is entered + * @timeout: Timeout in milliseconds, 0 if none + * @return command line length excluding terminator, or -ve on error: of the + * timeout is exceeded (either CONFIG_BOOT_RETRY_TIME or the timeout + * parameter), then -2 is returned. If a break is detected (Ctrl-C) then + * -1 is returned. + */ +int cli_readline_into_buffer(const char *const prompt, char *buffer, + int timeout); + +/** + * parse_line() - split a command line down into separate arguments + * + * The argv[] array is filled with pointers into @line, and each argument + * is terminated by \0 (i.e. @line is changed in the process unless there + * is only one argument). + * + * #argv is terminated by a NULL after the last argument pointer. + * + * At most CONFIG_SYS_MAXARGS arguments are permited - if there are more + * than that then an error is printed, and this function returns + * CONFIG_SYS_MAXARGS, with argv[] set up to that point. + * + * @line: Command line to parse + * @args: Array to hold arguments + * @return number of arguments + */ +int cli_simple_parse_line(char *line, char *argv[]); + +#ifdef CONFIG_OF_CONTROL +/** + * cli_process_fdt() - process the boot command from the FDT + * + * If bootcmmd is defined in the /config node of the FDT, we use that + * as the boot command. Further, if bootsecure is set to 1 (in the same + * node) then we return true, indicating that the command should be executed + * as securely as possible, avoiding the CLI parser. + * + * @cmdp: On entry, the command that will be executed if the FDT does + * not have a command. Returns the command to execute after + * checking the FDT. + * @return true to execute securely, else false + */ +bool cli_process_fdt(const char **cmdp); + +/** cli_secure_boot_cmd() - execute a command as securely as possible + * + * This avoids using the parser, thus executing the command with the + * smallest amount of code. Parameters are not supported. + */ +void cli_secure_boot_cmd(const char *cmd); +#else +static inline bool cli_process_fdt(const char **cmdp) +{ + return false; +} + +static inline void cli_secure_boot_cmd(const char *cmd) +{ +} +#endif /* CONFIG_OF_CONTROL */ + +/** + * Go into the command loop + * + * This will return if we get a timeout waiting for a command, but only for + * the simple parser (not hush). See CONFIG_BOOT_RETRY_TIME. + */ +void cli_loop(void); + +/** Set up the command line interpreter ready for action */ +void cli_init(void); + +#define endtick(seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk()) + +#endif diff --git a/include/hush.h b/include/cli_hush.h index 595303a652..4951eef572 100644 --- a/include/hush.h +++ b/include/cli_hush.h @@ -5,8 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef _HUSH_H_ -#define _HUSH_H_ +#ifndef _CLI_HUSH_H_ +#define _CLI_HUSH_H_ #define FLAG_EXIT_FROM_LOOP 1 #define FLAG_PARSE_SEMICOLON (1 << 1) /* symbol ';' is special for parser */ diff --git a/include/command.h b/include/command.h index d3f700fc3c..6f06db1cc3 100644 --- a/include/command.h +++ b/include/command.h @@ -11,7 +11,6 @@ #ifndef __COMMAND_H #define __COMMAND_H -#include <config.h> #include <linker_lists.h> #ifndef NULL diff --git a/include/common.h b/include/common.h index 232136c0cd..82c0a5a9a6 100644 --- a/include/common.h +++ b/include/common.h @@ -28,10 +28,8 @@ typedef volatile unsigned char vu_char; #endif #if defined(CONFIG_8xx) #include <asm/8xx_immap.h> -#if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \ - defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ - defined(CONFIG_MPC859DSL) || \ - defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \ +#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ + defined(CONFIG_MPC866) || \ defined(CONFIG_MPC866P) # define CONFIG_MPC866_FAMILY 1 #elif defined(CONFIG_MPC870) \ @@ -54,8 +52,6 @@ typedef volatile unsigned char vu_char; #include <asm/immap_512x.h> #elif defined(CONFIG_MPC8260) #if defined(CONFIG_MPC8247) \ - || defined(CONFIG_MPC8248) \ - || defined(CONFIG_MPC8271) \ || defined(CONFIG_MPC8272) #define CONFIG_MPC8272_FAMILY 1 #endif @@ -273,6 +269,7 @@ int print_buffer(ulong addr, const void *data, uint width, uint count, /* common/main.c */ void main_loop (void); int run_command(const char *cmd, int flag); +int run_command_repeatable(const char *cmd, int flag); /** * Run a list of commands separated by ; or even \0 @@ -286,12 +283,6 @@ int run_command(const char *cmd, int flag); * @return 0 on success, or != 0 on error. */ int run_command_list(const char *cmd, int len, int flag); -int readline (const char *const prompt); -int readline_into_buffer(const char *const prompt, char *buffer, - int timeout); -int parse_line (char *, char *[]); -void init_cmd_timeout(void); -void reset_cmd_timeout(void); extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ @@ -305,6 +296,7 @@ extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ int set_cpu_clk_info(void); +int mdm_init(void); #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void); #else @@ -505,8 +497,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -void rpxlite_init (void); - #ifdef CONFIG_HERMES /* $(BOARD)/hermes.c */ void hermes_start_lxt980 (int speed); @@ -693,9 +683,6 @@ ulong get_PERCLK3(void); ulong get_bus_freq (ulong); int get_serial_clock(void); -#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) -ulong get_ddr_freq(ulong); -#endif #if defined(CONFIG_MPC85xx) typedef MPC85xx_SYS_INFO sys_info_t; void get_sys_info ( sys_info_t * ); @@ -711,6 +698,8 @@ static inline ulong get_ddr_freq(ulong dummy) { return get_bus_freq(dummy); } +#else +ulong get_ddr_freq(ulong); #endif #if defined(CONFIG_4xx) diff --git a/include/commproc.h b/include/commproc.h index 29a3e61e80..52ac4caf5a 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -531,45 +531,6 @@ typedef struct scc_enet { #endif -/*** FADS860T********************************************************/ - -#if defined(CONFIG_FADS) && defined(CONFIG_MPC86x) -/* - * This ENET stuff is for the MPC86xFADS/MPC8xxADS with ethernet on SCC1. - */ -#ifdef CONFIG_SCC1_ENET - -#define SCC_ENET 0 - -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 - -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0200) - -#define PB_ENET_TENA ((uint)0x00001000) - -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) - -#endif /* CONFIG_SCC1_ETHERNET */ - -/* - * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS - * with ethernet on FEC. - */ - -#ifdef CONFIG_FEC_ENET -#define FEC_ENET /* Use FEC for Ethernet */ -#endif /* CONFIG_FEC_ENET */ - -#endif /* CONFIG_FADS && CONFIG_MPC86x */ - /*** FPS850L, FPS860L ************************************************/ #if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L) @@ -900,86 +861,6 @@ typedef struct scc_enet { #endif /* CONFIG_NETVIA */ -/*** QS850/QS823 ***************************************************/ - -#if defined(CONFIG_QS850) || defined(CONFIG_QS823) -#undef FEC_ENET /* Don't use FEC for EThernet */ - -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 - -#define PA_ENET_RXD ((ushort)0x0004) /* RXD on PA13 (Pin D9) */ -#define PA_ENET_TXD ((ushort)0x0008) /* TXD on PA12 (Pin D7) */ -#define PC_ENET_RENA ((ushort)0x0080) /* RENA on PC8 (Pin D12) */ -#define PC_ENET_CLSN ((ushort)0x0040) /* CLSN on PC9 (Pin C12) */ -#define PA_ENET_TCLK ((ushort)0x0200) /* TCLK on PA6 (Pin D8) */ -#define PA_ENET_RCLK ((ushort)0x0800) /* RCLK on PA4 (Pin D10) */ -#define PB_ENET_TENA ((uint)0x00002000) /* TENA on PB18 (Pin D11) */ -#define PC_ENET_LBK ((ushort)0x0010) /* Loopback control on PC11 (Pin B14) */ -#define PC_ENET_LI ((ushort)0x0020) /* Link Integrity control PC10 (A15) */ -#define PC_ENET_SQE ((ushort)0x0100) /* SQE Disable control PC7 (B15) */ - -/* SCC2 TXCLK from CLK2 - * SCC2 RXCLK from CLK4 - * SCC2 Connected to NMSI */ -#define SICR_ENET_MASK ((uint)0x00007F00) -#define SICR_ENET_CLKRT ((uint)0x00003D00) - -#endif /* CONFIG_QS850/QS823 */ - -/*** QS860T ***************************************************/ - -#ifdef CONFIG_QS860T -#ifdef CONFIG_FEC_ENET -#define FEC_ENET /* use FEC for EThernet */ -#endif /* CONFIG_FEC_ETHERNET */ - -/* This ENET stuff is for GTH 10 Mbit ( SCC ) */ -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 - -#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */ -#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */ -#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA6 */ -#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */ -#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */ -#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */ - -#define SICR_ENET_MASK ((uint)0x000000ff) -/* RCLK PA4 -->CLK4, TCLK PA6 -->CLK2 */ -#define SICR_ENET_CLKRT ((uint)0x0000003D) - -#endif /* CONFIG_QS860T */ - -/*** RPXLITE ********************************************************/ - -#ifdef CONFIG_RPXLITE -/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of - * this may be unique to the RPX-Lite configuration. - * Note TENA is on Port B. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#if defined(CONFIG_RMU) -#define PC_ENET_TENA ((uint)0x00000002) /* PC14 */ -#else -#define PB_ENET_TENA ((uint)0x00002000) -#endif -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003d00) -#endif /* CONFIG_RPXLITE */ - /*** SM850 *********************************************************/ /* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */ @@ -1048,7 +929,7 @@ typedef struct scc_enet { /*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/ #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ - defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \ + defined(CONFIG_R360MPI) || \ defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \ defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \ defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \ @@ -1142,29 +1023,6 @@ typedef struct scc_enet { # endif /* CONFIG_FEC_ENET */ #endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */ -/*** V37 **********************************************************/ - -#ifdef CONFIG_V37 -/* This ENET stuff is for the MPC823 with ethernet on SCC2. Some of - * this may be unique to the Marel V37 configuration. - * Note TENA is on Port B. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0400) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002e00) -#endif /* CONFIG_V37 */ - - /*********************************************************************/ /* SCC Event register as used by Ethernet. diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index b304a4103d..76818f673f 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -83,4 +83,12 @@ #define CONFIG_SYS_HZ 1000 #endif +#ifndef CONFIG_FIT_SIGNATURE +#define CONFIG_IMAGE_FORMAT_LEGACY +#endif + +#ifdef CONFIG_DISABLE_IMAGE_LEGACY +#undef CONFIG_IMAGE_FORMAT_LEGACY +#endif + #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/Adder.h b/include/configs/Adder.h deleted file mode 100644 index 140f4439c1..0000000000 --- a/include/configs/Adder.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (C) 2004-2005 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * - * Support for Analogue&Micro Adder boards family. - * Tested on AdderII and Adder87x. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#if !defined(CONFIG_MPC875) && !defined(CONFIG_MPC852T) -#define CONFIG_MPC875 -#endif - -#define CONFIG_ADDER /* Analogue&Micro Adder board */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_ETHER_ON_FEC1 -#define CONFIG_ETHER_ON_FEC2 -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 - -#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII_INIT 1 -#define FEC_ENET -#endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */ - -#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ -#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 -#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 -#ifdef CONFIG_MPC852T -#define CONFIG_SYS_8xx_CPUCLK_MAX 50000000 -#else -#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 -#endif /* CONFIG_MPC852T */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=1M(ROM)ro,-(root)" - -#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* #undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */ - -/*----------------------------------------------------------------------- - * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_MAX_SIZE 0x01000000 /* Up to 16 Mbyte */ - -#define CONFIG_SYS_MAMR 0x00002114 - -/* - * 4096 Up to 4096 SDRAM rows - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - */ -#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ - -#define CONFIG_SYS_RESET_ADDRESS 0x09900000 - -/*----------------------------------------------------------------------- - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -/*----------------------------------------------------------------------- - * Flash organisation - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ - -/* Environment is in flash */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SYS_OR0_PRELIM 0xFF000774 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V) - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*----------------------------------------------------------------------- - * Internal Memory Map Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Configuration registers - */ -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ - SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ - SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ - SYPCR_SWF | SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) - -/* TBSCR - Time Base Status and Control Register */ -#define CONFIG_SYS_TBSCR (TBSCR_TBF | TBSCR_TBE) - -/* PISCR - Periodic Interrupt Status and Control */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/* PLPRCR - PLL, Low-Power, and Reset Control Register */ -/* #define CONFIG_SYS_PLPRCR PLPRCR_TEXPS */ - -/* SCCR - System Clock and reset Control Register */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR SCCR_RTSEL - -#define CONFIG_SYS_DER 0 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx chips */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h deleted file mode 100644 index e0a233b28a..0000000000 --- a/include/configs/HIDDEN_DRAGON.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * (C) Copyright 2004 - * Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com - * - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_HIDDEN_DRAGON 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#if 0 -#define USE_DINK32 1 -#else -#undef USE_DINK32 -#endif - -#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */ -#define CONFIG_BAUDRATE 9600 -#define CONFIG_DRAM_SPEED 100 /* MHz */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 - -#define CONFIG_RTL8139 - -/* Make sure the ethaddr can be overwritten - TODO: Remove this on final product -*/ -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x02000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined (USE_DINK32) -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE 0x00090000 -#define CONFIG_SYS_RAMBOOT 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#endif - -#define CONFIG_SYS_FLASH_BASE 0xFFE00000 -#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* Unity has onboard 1MByte flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_ISA_MEM 0xFD000000 -#define CONFIG_SYS_ISA_IO 0xFE000000 - -#define CONFIG_SYS_FLASH_RANGE_BASE 0xFFE00000 /* flash memory address range */ -#define CONFIG_SYS_FLASH_RANGE_SIZE 0x00200000 -#define FLASH_BASE0_PRELIM 0xFFE00000 /* processor board flash */ - -/* - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#ifdef CONFIG_SYS_I2C_SOFT -#error "Soft I2C is not configured properly. Please review!" -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM } - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - - -/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */ -#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */ -#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */ -#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */ - -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ - -/* TODO: Change this to VIA686A */ - -/* - * NS87308 Configuration - */ -#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */ - -#define CONFIG_SYS_NS87308_BADDR_10 1 - -#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \ - CONFIG_SYS_NS87308_UART2 | \ - CONFIG_SYS_NS87308_POWRMAN | \ - CONFIG_SYS_NS87308_RTC_APC ) - -#undef CONFIG_SYS_NS87308_PS2MOD - -#define CONFIG_SYS_NS87308_CS0_BASE 0x0076 -#define CONFIG_SYS_NS87308_CS0_CONF 0x30 -#define CONFIG_SYS_NS87308_CS1_BASE 0x0075 -#define CONFIG_SYS_NS87308_CS1_CONF 0x30 -#define CONFIG_SYS_NS87308_CS2_BASE 0x0074 -#define CONFIG_SYS_NS87308_CS2_CONF 0x30 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#if (CONFIG_CONS_INDEX > 2) -#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000 -#else -#define CONFIG_SYS_NS16550_CLK 1843200 -#endif - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - -#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ - -#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */ - -/* the following are for SDRAM only*/ -#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#if 0 -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */ -#endif - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - - -/* memory bank settings*/ -/* - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 -/* - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#if defined(USE_DINK32) -#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 ) -#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K ) -#else -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#endif - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 36 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#undef NR_8259_INTS -#define NR_8259_INTS 1 - -#define CONFIG_DISK_SPINUP_TIME 1000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h deleted file mode 100644 index a2fdfd3274..0000000000 --- a/include/configs/ISPAN.h +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * - * Support for Interphase iSPAN Communications Controllers - * (453x and others). Tested on 4532. - * - * Derived from iSPAN 4539 port (iphase4539) by - * Wolfgang Grandegger <wg@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_SYS_TEXT_BASE 0xFE7A0000 - -/*----------------------------------------------------------------------- - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * If CONFIG_CONS_NONE is defined, then the serial console routines must be - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#define CONFIG_CONS_ON_SMC /* Define if console on SMC */ -#undef CONFIG_CONS_ON_SCC /* Define if console on SCC */ -#undef CONFIG_CONS_NONE /* Define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* Which serial channel for console */ - -/*----------------------------------------------------------------------- - * Select Ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC). - * - * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must - * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */ -#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */ -#undef CONFIG_ETHER_NONE /* Define if Ethernet on something else */ -#define CONFIG_ETHER_INDEX 3 /* Which channel for Ethernrt */ - -#ifdef CONFIG_ETHER_ON_FCC - -#if CONFIG_ETHER_INDEX == 3 - -#define CONFIG_SYS_PHY_ADDR 0 -#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16) -#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) - -#endif /* CONFIG_ETHER_INDEX == 3 */ - -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* Bit-bang MII PHY management */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 3 /* Port D */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - - -#define CONFIG_SYS_MDIO_PIN 0x00040000 /* PD13 */ -#define CONFIG_SYS_MDC_PIN 0x00080000 /* PD12 */ - -#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN) -#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN) -#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDIO_PIN - -#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDC_PIN - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - -#define CONFIG_8260_CLKIN 65536000 /* in Hz */ -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" - -#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* #undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* Default load address */ - -#define CONFIG_SYS_RESET_ADDRESS 0x09900000 - -#define CONFIG_MISC_INIT_R /* We need misc_init_r() */ - -/*----------------------------------------------------------------------- - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 142 /* Max num of sects on one chip */ - -/* Environment is in flash, there is little space left in Serial EEPROM */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * If you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -/* 0x1686B245 */ -#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\ - HRCW_L2CPC10 | HRCW_ISB110 |\ - HRCW_BMS | HRCW_MMR11 | HRCW_APPC10 |\ - HRCW_CS10PC01 | HRCW_MODCK_H0101 \ - ) -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0F00000 -#ifdef CONFIG_SYS_REV_B -#define CONFIG_SYS_DEFAULT_IMMR 0xFF000000 -#endif /* CONFIG_SYS_REV_B */ -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ - HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR RMR_CSRE - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_BCR 0xA01C0000 - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR 0x42250000/* 0x4205C000 */ - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#if defined (CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/*----------------------------------------------------------------------- - * Init Memory Controller: - * - * Bank Bus Machine PortSize Device - * ---- --- ------- ----------------------------- ------ - * 0 60x GPCM 8 bit (Rev.B)/16 bit (Rev.D) Flash - * 1 60x SDRAM 64 bit SDRAM - * 2 Local SDRAM 32 bit SDRAM - */ -#define CONFIG_SYS_USE_FIRMWARE /* If defined - do not initialise memory - controller, rely on initialisation - performed by the Interphase boot firmware. - */ - -#define CONFIG_SYS_OR0_PRELIM 0xFE000882 -#ifdef CONFIG_SYS_REV_B -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_8 | BRx_V) -#else /* Rev. D */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V) -#endif /* CONFIG_SYS_REV_B */ - -#define CONFIG_SYS_MPTPR 0x7F00 - -/* Please note that 60x SDRAM MUST start at 0 */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_60x_BR 0x00000041 -#define CONFIG_SYS_60x_OR 0xF0002CD0 -#define CONFIG_SYS_PSDMR 0x0049929A -#define CONFIG_SYS_PSRT 0x07 - -#define CONFIG_SYS_LSDRAM_BASE 0xF7000000 -#define CONFIG_SYS_LOC_BR 0x00001861 -#define CONFIG_SYS_LOC_OR 0xFF803280 -#define CONFIG_SYS_LSDMR 0x8285A552 -#define CONFIG_SYS_LSRT 0x07 - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h deleted file mode 100644 index 39f7564b74..0000000000 --- a/include/configs/MPC8260ADS.h +++ /dev/null @@ -1,549 +0,0 @@ -/* - * (C) Copyright 2001 - * Stuart Hughes <stuarth@lineo.com> - * This file is based on similar values for other boards found in other - * U-Boot config files, and some that I found in the mpc8260ads manual. - * - * Note: my board is a PILOT rev. - * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address. - * - * (C) Copyright 2003-2004 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2. - * Ported to PQ2FADS-ZU and PQ2FADS-VR boards. - * Ported to MPC8272ADS board. - * - * Copyright (c) 2005 MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - * Added support for PCI bridge on MPC8272ADS - * - * Copyright (C) Freescale Semiconductor, Inc. 2006-2009. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ -#endif - -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -/* - * Figure out if we are booting low via flash HRCW or high via the BCSR. - */ -#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) /* Boot low (flash HRCW) */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* ADS flavours */ -#define CONFIG_SYS_8260ADS 1 /* MPC8260ADS */ -#define CONFIG_SYS_8266ADS 2 /* MPC8266ADS */ -#define CONFIG_SYS_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */ -#define CONFIG_SYS_8272ADS 4 /* MPC8272ADS */ - -#ifndef CONFIG_ADSTYPE -#define CONFIG_ADSTYPE CONFIG_SYS_8260ADS -#endif /* CONFIG_ADSTYPE */ - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_MPC8272 1 -#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -/* - * Actually MPC8275, but the code is littered with ifdefs that - * apply to both, or which use this ifdef to assume board-specific - * details. :-( - */ -#define CONFIG_MPC8272 1 -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -/* allow serial and ethaddr to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ - -#ifdef CONFIG_ETHER_ON_FCC - -#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ - -#if CONFIG_ETHER_INDEX == 1 - -# define CONFIG_SYS_PHY_ADDR 0 -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10) -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) - -#elif CONFIG_ETHER_INDEX == 2 - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS /* RxCLK is CLK15, TxCLK is CLK16 */ -# define CONFIG_SYS_PHY_ADDR 3 -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16) -#else /* RxCLK is CLK13, TxCLK is CLK14 */ -# define CONFIG_SYS_PHY_ADDR 0 -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 /* BDs and buffers on 60x bus */ -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) /* Full duplex */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_SYS_MDIO_PIN 0x00002000 /* PC18 */ -#define CONFIG_SYS_MDC_PIN 0x00001000 /* PC19 */ -#else -#define CONFIG_SYS_MDIO_PIN 0x00400000 /* PC9 */ -#define CONFIG_SYS_MDC_PIN 0x00200000 /* PC10 */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ - -#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN) -#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN) -#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDIO_PIN - -#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDC_PIN - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#undef CONFIG_SPD_EEPROM /* On new boards, SDRAM is soldered */ -#else -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR) -#define CONFIG_SPD_ADDR 0x50 -#endif -#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */ - -/*PCI*/ -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_PNP -#define CONFIG_PCI_BOOTDELAY 0 -#define CONFIG_PCI_SCAN_SHOW -#endif - -#ifndef CONFIG_SDRAM_PBI -#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */ -#endif - -#ifndef CONFIG_8260_CLKIN -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#define CONFIG_8260_CLKIN 100000000 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 66000000 /* in Hz */ -#endif -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#if defined(CONFIG_OF_LIBFDT) -#define OF_TBCLK (bd->bi_busfreq / 4) -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM - -#undef CONFIG_CMD_XIMG - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS - #undef CONFIG_CMD_SDRAM - #undef CONFIG_CMD_I2C - -#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS - #undef CONFIG_CMD_SDRAM - #undef CONFIG_CMD_I2C - -#else - #undef CONFIG_CMD_PCI - -#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */ - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock2" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_FLASH_BASE 0xff800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -/* - * JFFS2 partitions - * - * Note: fake mtd_id used, no linux mtd map file - */ -#define MTDIDS_DEFAULT "nor0=mpc8260ads-0" -#define MTDPARTS_DEFAULT "mtdparts=mpc8260ads-0:-@1m(jffs2)" -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS - -/* this is stuff came out of the Motorola docs */ -#ifndef CONFIG_SYS_LOWBOOT -#define CONFIG_SYS_DEFAULT_IMMR 0x0F010000 -#endif - -#define CONFIG_SYS_IMMR 0xF0000000 -#define CONFIG_SYS_BCSR 0xF4500000 -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS -#define CONFIG_SYS_PCI_INT 0xF8200000 -#endif -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_LSDRAM_BASE 0xFD000000 - -#define RS232EN_1 0x02000002 -#define RS232EN_2 0x01000001 -#define FETHIEN1 0x08000008 -#define FETH1_RST 0x04000004 -#define FETHIEN2 0x10000000 -#define FETH2_RST 0x08000000 -#define BCSR_PCI_MODE 0x01000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#ifdef CONFIG_SYS_LOWBOOT -/* PQ2FADS flash HRCW = 0x0EB4B645 */ -#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ - ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 ) |\ - ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\ - ( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \ - ) -#else -/* PQ2FADS BCSR HRCW = 0x0CB23645 */ -#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ - ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 ) |\ - ( HRCW_BMS | HRCW_APPC10 ) |\ - ( HRCW_MODCK_H0101 ) \ - ) -#endif -/* no slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -#ifndef CONFIG_SYS_RAMBOOT -# define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_SECT_SIZE 0x40000 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE) -#else -# define CONFIG_ENV_IS_IN_NVRAM 1 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -# define CONFIG_ENV_SIZE 0x200 -#endif /* CONFIG_SYS_RAMBOOT */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SYPCR 0xFFFFFFC3 -#define CONFIG_SYS_BCR 0x100C0000 -#define CONFIG_SYS_SIUMCR 0x0A200000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801) -#define CONFIG_SYS_OR0_PRELIM 0xFF800876 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00001801) -#define CONFIG_SYS_OR1_PRELIM 0xFFFF8010 - -/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8010 -#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -#define CONFIG_SYS_BR8_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */ -#define CONFIG_SYS_OR8_PRELIM 0xFFFF8010 -#endif - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#if (CONFIG_ADSTYPE == CONFIG_SYS_8266ADS) || (CONFIG_ADSTYPE == CONFIG_SYS_8272ADS) -#undef CONFIG_SYS_LSDRAM_BASE /* No local bus SDRAM on these boards */ -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8266ADS */ - -#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS -#define CONFIG_SYS_OR2 0xFE002EC0 -#define CONFIG_SYS_PSDMR 0x824B36A3 -#define CONFIG_SYS_PSRT 0x13 -#define CONFIG_SYS_LSDMR 0x828737A3 -#define CONFIG_SYS_LSRT 0x13 -#define CONFIG_SYS_MPTPR 0x2800 -#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_SYS_OR2 0xFC002CC0 -#define CONFIG_SYS_PSDMR 0x834E24A3 -#define CONFIG_SYS_PSRT 0x13 -#define CONFIG_SYS_MPTPR 0x2800 -#else -#define CONFIG_SYS_OR2 0xFF000CA0 -#define CONFIG_SYS_PSDMR 0x016EB452 -#define CONFIG_SYS_PSRT 0x21 -#define CONFIG_SYS_LSDMR 0x0086A522 -#define CONFIG_SYS_LSRT 0x21 -#define CONFIG_SYS_MPTPR 0x1900 -#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */ - -#define CONFIG_SYS_RESET_ADDRESS 0x04400000 - -#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS - -/* PCI Memory map (if different from default map */ -#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */ -#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ -#define CONFIG_SYS_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ - PICMR_PREFETCH_EN) - -/* - * These are the windows that allow the CPU to access PCI address space. - * All three PCI master windows, which allow the CPU to access PCI - * prefetch, non prefetch, and IO space (see below), must all fit within - * these windows. - */ - -/* - * Master window that allows the CPU to access PCI Memory (prefetch). - * This window will be setup with the second set of Outbound ATU registers - * in the bridge. - */ - -#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define CONFIG_SYS_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define CONFIG_SYS_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL -#define CONFIG_SYS_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ -#define CONFIG_SYS_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) - -/* - * Master window that allows the CPU to access PCI Memory (non-prefetch). - * This window will be setup with the second set of Outbound ATU registers - * in the bridge. - */ - -#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define CONFIG_SYS_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL -#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ -#define CONFIG_SYS_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) - -/* - * Master window that allows the CPU to access PCI IO space. - * This window will be setup with the first set of Outbound ATU registers - * in the bridge. - */ - -#define CONFIG_SYS_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */ -#define CONFIG_SYS_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define CONFIG_SYS_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL -#define CONFIG_SYS_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */ -#define CONFIG_SYS_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO) - - -/* PCIBR0 - for PCI IO*/ -#define CONFIG_SYS_PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL /* Local base */ -#define CONFIG_SYS_PCIMSK0_MASK ~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U) /* Size of window */ -/* PCIBR1 - prefetch and non-prefetch regions joined together */ -#define CONFIG_SYS_PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL -#define CONFIG_SYS_PCIMSK1_MASK ~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U) - -#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/ - -#define CONFIG_HAS_ETH0 - -#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS -#define CONFIG_HAS_ETH1 -#endif - -#define CONFIG_NETDEV eth0 -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" __stringify(CONFIG_NETDEV) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "fdtaddr=400000\0" \ - "console=ttyCPM0\0" \ - "setbootargs=setenv bootargs " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 3dd52ce30f..98e907245a 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -15,14 +15,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */ -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#endif /* CONFIG_NAND_SPL */ -#endif /* CONFIG_NAND_U_BOOT */ - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFE000000 #endif @@ -93,10 +85,6 @@ */ #define CONFIG_SYS_IMMR 0xE0000000 -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR -#endif - /* * Arbiter Setup */ @@ -281,17 +269,10 @@ | OR_FCM_EHTR) /* 0xFFFF8396 */ -#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#endif #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) @@ -459,16 +440,7 @@ /* * Environment */ -#if defined(CONFIG_NAND_U_BOOT) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_OFFSET (512 * 1024) - #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) - #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_RANGE) -#elif !defined(CONFIG_SYS_RAMBOOT) +#if !defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) @@ -503,7 +475,7 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI -#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) +#if defined(CONFIG_SYS_RAMBOOT) #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 72f5fde16a..27221648e4 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -19,18 +19,6 @@ #define CONFIG_PHYS_64BIT 1 #endif -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ -#endif - #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 @@ -222,8 +210,7 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \ - defined(CONFIG_RAMBOOT_SPIFLASH) +#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #else @@ -352,17 +339,10 @@ | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif #define CONFIG_SYS_BR4_PRELIM \ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ @@ -625,12 +605,7 @@ */ #if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) -#elif defined(CONFIG_RAMBOOT_SPIFLASH) +#if defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 5165a456aa..4da247c51a 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -49,18 +49,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xfff80000 #endif @@ -180,12 +168,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else #undef CONFIG_SYS_RAMBOOT -#endif #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI @@ -228,17 +211,10 @@ extern unsigned long get_clock_freq(void); | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */ -#define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ @@ -476,11 +452,6 @@ extern unsigned long get_clock_freq(void); * Environment */ #if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#endif #else #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 48ae9d4cae..0b07876e78 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -20,18 +20,6 @@ #define CONFIG_PHYS_64BIT #endif -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_RAMBOOT_NAND -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif @@ -208,12 +196,7 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else #undef CONFIG_SYS_RAMBOOT -#endif #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI @@ -353,17 +336,10 @@ | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ @@ -600,12 +576,6 @@ */ #if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024)\ - + CONFIG_SYS_NAND_BLOCK_SIZE) -#endif #else #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h deleted file mode 100644 index beada7ee2a..0000000000 --- a/include/configs/MPC86xADS.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Motorola MPC8xxADS board. Copied from the FADS config. - * - * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) - * - * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com - * - * Values common to all FADS family boards are in board/fads/fads.h - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -/* board type */ -#define CONFIG_MPC86xADS 1 /* new ADS */ -#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ - -/* CPU type - pick one of these */ -#define CONFIG_MPC866T 1 -#undef CONFIG_MPC866P -#undef CONFIG_MPC859T -#undef CONFIG_MPC859DSL -#undef CONFIG_MPC852T - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */ -#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 -#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 -#define CONFIG_SYS_8xx_CPUCLK_MAX 80000000 - -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ 1 - -#include "../../board/fads/fads.h" - -#define CONFIG_SYS_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ -#define CONFIG_SYS_BR5_PRELIM (CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V) - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h deleted file mode 100644 index eeb2355b9f..0000000000 --- a/include/configs/MPC885ADS.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Motorola MPC885ADS board. Values common to all FADS family boards - * are in board/fads/fads.h - * - * Copyright (C) 2003-2004 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC885ADS 1 /* MPC885ADS board */ -#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ - -#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ -#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 -#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 -#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 - -#define CONFIG_SDRAM_50MHZ 1 - -#include "../../board/fads/fads.h" - -#define CONFIG_SYS_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ -#define CONFIG_SYS_BR5_PRELIM (CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V) - -#define CONFIG_HAS_ETH1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h deleted file mode 100644 index 08cfc9e4bc..0000000000 --- a/include/configs/NETPHONE.h +++ /dev/null @@ -1,701 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2 -#error Unsupported CONFIG_NETPHONE version -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC870 1 /* This is a MPC885 CPU */ -#define CONFIG_NETPHONE 1 /* ...on a NetPhone board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -/* #define CONFIG_XIN 10000000 */ -#define CONFIG_XIN 50000000 -/* #define MPC8XX_HZ 120000000 */ -#define MPC8XX_HZ 66666666 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" - -#define CONFIG_SOURCE -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_RMII 1 /* use RMII interface */ - -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 8 /* phy address of FEC */ -#define CONFIG_FEC1_PHY_NORXERR 1 - -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 4 -#define CONFIG_FEC2_PHY_NORXERR 1 - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CDP - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#if CONFIG_NETPHONE_VERSION == 2 -#define CONFIG_SYS_FLASH_BASE4 0x40080000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#if CONFIG_NETPHONE_VERSION == 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#elif CONFIG_NETPHONE_VERSION == 2 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 25000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 40000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 75000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif - -#elif CONFIG_XIN == 50000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 66666666 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 50MHz -#endif - -#else - -#error unsupported XIN freq -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#if CONFIG_NETPHONE_VERSION == 2 - -#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */ - -#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#endif - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#define CONFIG_SYS_MAMR_PTA 234 - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/****************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define NAND_SIZE 0x00010000 /* 64K */ - -#define DSP_BASE 0xF1000000 -#define NAND_BASE 0xF1010000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*****************************************************************************/ - -#if CONFIG_NETPHONE_VERSION == 1 -#define STATUS_LED_BIT 0x00000008 /* bit 28 */ -#elif CONFIG_NETPHONE_VERSION == 2 -#define STATUS_LED_BIT 0x00000080 /* bit 24 */ -#endif - -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#ifndef __ASSEMBLY__ - -/* LEDs */ - -/* led_id_t is unsigned int mask */ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \ - else \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \ - } while(0) - -#define __led_init(msk, st) __led_set(msk, st) - -#endif - -/*********************************************************************************************************** - - ---------------------------------------------------------------------------------------------- - - (V1) version 1 of the board - (V2) version 2 of the board - - ---------------------------------------------------------------------------------------------- - - Pin definitions: - - +------+----------------+--------+------------------------------------------------------------ - | # | Name | Type | Comment - +------+----------------+--------+------------------------------------------------------------ - | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select - | PA7 | DSP_INT | Output | DSP interrupt - | PA10 | DSP_RESET | Output | DSP reset - | PA14 | USBOE | Output | USB (1) - | PA15 | USBRXD | Output | USB (1) - | PB19 | BT_RTS | Output | Bluetooth (0) - | PB23 | BT_CTS | Output | Bluetooth (0) - | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select - | PB27 | SPICS_DISP | Output | Display chip select - | PB28 | SPI_RXD_3V | Input | SPI Data Rx - | PB29 | SPI_TXD | Output | SPI Data Tx - | PB30 | SPI_CLK | Output | SPI Clock - | PC10 | DISPA0 | Output | Display A0 - | PC11 | BACKLIGHT | Output | Display backlit - | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD - | | IO_RESET | Output | (V2) General I/O reset - | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1) - | | HOOK | Input | (V2) Hook input interrupt - | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK - | | F_RY_BY | Input | (V2) NAND F_RY_BY - | PE17 | F_ALE | Output | NAND F_ALE - | PE18 | F_CLE | Output | NAND F_CLE - | PE20 | F_CE | Output | NAND F_CE - | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select - | | LED | Output | (V2) LED - | PE27 | SPICS_ER | Output | External serial register CS - | PE28 | LEDIO1 | Output | (V1) LED - | | BKBR1 | Input | (V2) Keyboard input scan - | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2) - | | BKBR2 | Input | (V2) Keyboard input scan - | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2) - | | BKBR3 | Input | (V2) Keyboard input scan - | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY - | | BKBR4 | Input | (V2) Keyboard input scan - +------+----------------+--------+--------------------------------------------------- - - ---------------------------------------------------------------------------------------------- - - Serial register input: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | 0 | BKBR1 | (V1) Keyboard input scan - | 1 | BKBR3 | (V1) Keyboard input scan - | 2 | BKBR4 | (V1) Keyboard input scan - | 3 | BKBR2 | (V1) Keyboard input scan - | 4 | HOOK | (V1) Hook switch - | 5 | BT_LINK | (V1) Bluetooth link status - | 6 | HOST_WAKE | (V1) Bluetooth host wake up - | 7 | OK_ETH | (V1) Cisco inline power OK status - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Serial register output: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | 0 | KEY1 | Keyboard output scan - | 1 | KEY2 | Keyboard output scan - | 2 | KEY3 | Keyboard output scan - | 3 | KEY4 | Keyboard output scan - | 4 | KEY5 | Keyboard output scan - | 5 | KEY6 | Keyboard output scan - | 6 | KEY7 | Keyboard output scan - | 7 | BT_WAKE | Bluetooth wake up - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Chip selects: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | CS0 | CS0 | Boot flash - | CS1 | CS_FLASH | NAND flash - | CS2 | CS_DSP | DSP - | CS3 | DCS_DRAM | DRAM - | CS4 | CS_FLASH2 | (V2) 2nd flash - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IRQ1 | IRQ_DSP | DSP interrupt - | IRQ3 | S_INTER | DUSLIC ??? - | IRQ4 | F_RY_BY | NAND - | IRQ7 | IRQ_MAX | MAX 3100 interrupt - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts on PCMCIA pins: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface - | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface - | IP_A2| RMII1_MDINT | PHY interrupt for #1 - | IP_A3| RMII2_MDINT | PHY interrupt for #2 - | IP_A5| HOST_WAKE | (V2) Bluetooth host wake - | IP_A6| OK_ETH | (V2) Cisco inline power OK - +------+----------------+------------------------------------------------------------ - -*************************************************************************************************/ - -#define CONFIG_SED156X 1 /* use SED156X */ -#define CONFIG_SED156X_PG12864Q 1 /* type of display used */ - -/* serial interfacing macros */ - -#define SED156X_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_SPI_RXD_MASK 0x00000008 - -#define SED156X_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_SPI_TXD_MASK 0x00000004 - -#define SED156X_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_SPI_CLK_MASK 0x00000002 - -#define SED156X_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_CS_MASK 0x00000010 - -#define SED156X_A0_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) -#define SED156X_A0_MASK 0x0020 - -/*************************************************************************************************/ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 - -/*************************************************************************************************/ - -/* use board specific hardware */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG -#define CONFIG_SHOW_ACTIVITY - -/*************************************************************************************************/ - -/* phone console configuration */ - -#define PHONE_CONSOLE_POLL_HZ (CONFIG_SYS_HZ/200) /* poll every 5ms */ - -/*************************************************************************************************/ - -#define CONFIG_CDP_DEVICE_ID 20 -#define CONFIG_CDP_DEVICE_ID_PREFIX "NP" /* netphone */ -#define CONFIG_CDP_PORT_ID "eth%d" -#define CONFIG_CDP_CAPABILITIES 0x00000010 -#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME -#define CONFIG_CDP_PLATFORM "Intracom NetPhone" -#define CONFIG_CDP_TRIGGER 0x20020001 -#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */ -#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone */ - -/*************************************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 - -/*************************************************************************************************/ - -#define CONFIG_CRC32_VERIFY 1 - -/*************************************************************************************************/ - -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*************************************************************************************************/ -#endif /* __CONFIG_H */ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h deleted file mode 100644 index 800a922678..0000000000 --- a/include/configs/NETTA.h +++ /dev/null @@ -1,666 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC885 1 /* This is a MPC885 CPU */ -#define CONFIG_NETTA 1 /* ...on a NetTA board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -/* #define CONFIG_XIN 10000000 */ -#define CONFIG_XIN 50000000 -#define MPC8XX_HZ 120000000 -/* #define MPC8XX_HZ 100000000 */ -/* #define MPC8XX_HZ 50000000 */ -/* #define MPC8XX_HZ 80000000 */ - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY /* do not discover phys */ -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_RMII 1 /* use RMII interface */ - -#if defined(CONFIG_NETTA_ISDN) -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */ -#define CONFIG_FEC1_PHY_NORXERR 1 -#undef CONFIG_ETHER_ON_FEC2 -#else -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */ -#define CONFIG_FEC1_PHY_NORXERR 1 -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */ -#define CONFIG_FEC2_PHY_NORXERR 1 -#endif - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CODEC | \ - CONFIG_SYS_POST_DSP ) - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCMCIA -#define CONFIG_CMD_PING - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 25000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 40000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 75000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif - -#elif CONFIG_XIN == 50000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 80000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 50MHz -#endif - -#else - -#error unsupported XIN freq -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_MAMR_PTA 234 -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_MAMR_PTA 195 -#elif MPC8XX_HZ == 80000000 -#define CONFIG_SYS_MAMR_PTA 156 -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_MAMR_PTA 98 -#else -#error Unknown frequency -#endif - - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/*********************************************************************************************************** - - Pin definitions: - - +------+----------------+--------+------------------------------------------------------------ - | # | Name | Type | Comment - +------+----------------+--------+------------------------------------------------------------ - | PA3 | OK_ETH_3V | Input | CISCO Ethernet power OK - | | | | (NetRoute: FEC1, TA: FEC2) (0=power OK) - | PA6 | P_VCCD1 | Output | TPS2211A PCMCIA - | PA7 | DCL1_3V | Periph | IDL1 PCM clock - | PA8 | DSP_DR1 | Periph | IDL1 PCM Data Rx - | PA9 | L1TXDA | Periph | IDL1 PCM Data Tx - | PA10 | P_VCCD0 | Output | TPS2211A PCMCIA - | PA12 | P_SHDN | Output | TPS2211A PCMCIA - | PA13 | ETH_LOOP | Output | CISCO Loopback remote power - | | | | (NetRoute: FEC1, TA: FEC2) (1=NORMAL) - | PA14 | P_VPPD0 | Output | TPS2211A PCMCIA - | PA15 | P_VPPD1 | Output | TPS2211A PCMCIA - | PB14 | SPIEN_FXO | Output | SPI CS for FXO daughter-board - | PB15 | SPIEN_S1 | Output | SPI CS for S-interface 1 (NetRoute only) - | PB16 | DREQ1 | Output | D channel request for S-interface chip 1. - | PB17 | L1ST3 | Periph | IDL1 timeslot enable signal for PPC - | PB18 | L1ST2 | Periph | IDL1 timeslot enable signal for PPC - | PB19 | SPIEN_S2 | Output | SPI CS for S-interface 2 (NetRoute only) - | PB20 | SPIEN_SEEPROM | Output | SPI CS for serial eeprom - | PB21 | LEDIO | Output | Led mode indication for PHY - | PB22 | UART_CTS | Input | UART CTS - | PB23 | UART_RTS | Output | UART RTS - | PB24 | UART_RX | Periph | UART Data Rx - | PB25 | UART_TX | Periph | UART Data Tx - | PB26 | RMII-MDC | Periph | Free for future use (MII mgt clock) - | PB27 | RMII-MDIO | Periph | Free for future use (MII mgt data) - | PB28 | SPI_RXD_3V | Input | SPI Data Rx - | PB29 | SPI_TXD | Output | SPI Data Tx - | PB30 | SPI_CLK | Output | SPI Clock - | PB31 | RMII1-REFCLK | Periph | RMII reference clock for FEC1 - | PC4 | PHY1_LINK | Input | PHY link state FEC1 (interrupt) - | PC5 | PHY2_LINK | Input | PHY link state FEC2 (interrupt) - | PC6 | RMII1-MDINT | Input | PHY prog interrupt FEC1 (interrupt) - | PC7 | RMII2-MDINT | Input | PHY prog interrupt FEC1 (interrupt) - | PC8 | P_OC | Input | TPS2211A PCMCIA overcurrent (interrupt) (1=OK) - | PC9 | COM_HOOK1 | Input | Codec interrupt chip #1 (interrupt) - | PC10 | COM_HOOK2 | Input | Codec interrupt chip #2 (interrupt) - | PC11 | COM_HOOK4 | Input | Codec interrupt chip #4 (interrupt) - | PC12 | COM_HOOK3 | Input | Codec interrupt chip #3 (interrupt) - | PC13 | F_RY_BY | Input | NAND ready signal (interrupt) - | PC14 | FAN_OK | Input | Fan status signal (interrupt) (1=OK) - | PC15 | PC15_DIRECT0 | Periph | PCMCIA DMA request. - | PD3 | F_ALE | Output | NAND - | PD4 | F_CLE | Output | NAND - | PD5 | F_CE | Output | NAND - | PD6 | DSP_INT | Output | DSP debug interrupt - | PD7 | DSP_RESET | Output | DSP reset - | PD8 | RMII_MDC | Periph | MII mgt clock - | PD9 | SPIEN_C1 | Output | SPI CS for codec #1 - | PD10 | SPIEN_C2 | Output | SPI CS for codec #2 - | PD11 | SPIEN_C3 | Output | SPI CS for codec #3 - | PD12 | FSC2 | Periph | IDL2 frame sync - | PD13 | DGRANT2 | Input | D channel grant from S #2 - | PD14 | SPIEN_C4 | Output | SPI CS for codec #4 - | PD15 | TP700 | Output | Testpoint for software debugging - | PE14 | RMII2-TXD0 | Periph | FEC2 transmit data - | PE15 | RMII2-TXD1 | Periph | FEC2 transmit data - | PE16 | RMII2-REFCLK | Periph | TA: RMII ref clock for - | | DCL2 | Periph | NetRoute: PCM clock #2 - | PE17 | TP703 | Output | Testpoint for software debugging - | PE18 | DGRANT1 | Input | D channel grant from S #1 - | PE19 | RMII2-TXEN | Periph | TA: FEC2 tx enable - | | PCM2OUT | Periph | NetRoute: Tx data for IDL2 - | PE20 | FSC1 | Periph | IDL1 frame sync - | PE21 | RMII2-RXD0 | Periph | FEC2 receive data - | PE22 | RMII2-RXD1 | Periph | FEC2 receive data - | PE23 | L1ST1 | Periph | IDL1 timeslot enable signal for PPC - | PE24 | U-N1 | Output | Select user/network for S #1 (0=user) - | PE25 | U-N2 | Output | Select user/network for S #2 (0=user) - | PE26 | RMII2-RXDV | Periph | FEC2 valid - | PE27 | DREQ2 | Output | D channel request for S #2. - | PE28 | FPGA_DONE | Input | FPGA done signal - | PE29 | FPGA_INIT | Output | FPGA init signal - | PE30 | UDOUT2_3V | Input | IDL2 PCM input - | PE31 | | | Free - +------+----------------+--------+--------------------------------------------------- - - Chip selects: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | CS0 | CS0 | Boot flash - | CS1 | CS_FLASH | NAND flash - | CS2 | CS_DSP | DSP - | CS3 | DCS_DRAM | DRAM - | CS4 | CS_ER1 | External output register - +------+----------------+------------------------------------------------------------ - - Interrupts: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IRQ1 | UINTER_3V | S interrupt chips interrupt (common) - | IRQ3 | IRQ_DSP | DSP interrupt - | IRQ4 | IRQ_DSP1 | Extra DSP interrupt - +------+----------------+------------------------------------------------------------ - -*************************************************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define NAND_SIZE 0x00010000 /* 64K */ -#define ER_SIZE 0x00010000 /* 64K */ -#define DUMMY_SIZE 0x00010000 /* 64K */ - -#define DSP_BASE 0xF1000000 -#define NAND_BASE 0xF1010000 -#define ER_BASE 0xF1020000 -#define DUMMY_BASE 0xF1FF0000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_SYS_DIRECT_NAND_TFTP - -/*****************************************************************************/ - -#if 1 -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ - -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#endif - -/*************************************************************************************************/ - -#define CONFIG_CDP_DEVICE_ID 20 -#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta */ -#define CONFIG_CDP_PORT_ID "eth%d" -#define CONFIG_CDP_CAPABILITIES 0x00000010 -#define CONFIG_CDP_VERSION "u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME -#define CONFIG_CDP_PLATFORM "Intracom NetTA" -#define CONFIG_CDP_TRIGGER 0x20020001 -#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */ -#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone? */ - -/*************************************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 - -/*************************************************************************************************/ - -#define CONFIG_CRC32_VERIFY 1 - -/*************************************************************************************************/ - -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*************************************************************************************************/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h deleted file mode 100644 index 55ae4b5338..0000000000 --- a/include/configs/NETTA2.h +++ /dev/null @@ -1,654 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2 -#error Unsupported CONFIG_NETTA2 version -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC870 1 /* This is a MPC885 CPU */ -#define CONFIG_NETTA2 1 /* ...on a NetTA2 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -/* #define CONFIG_XIN 10000000 */ -#define CONFIG_XIN 50000000 -/* #define MPC8XX_HZ 120000000 */ -#define MPC8XX_HZ 66666666 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_SOURCE -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_RMII 1 /* use RMII interface */ - -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 8 /* phy address of FEC */ -#define CONFIG_FEC1_PHY_NORXERR 1 - -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 4 -#define CONFIG_FEC2_PHY_NORXERR 1 - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CDP - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#if CONFIG_NETTA2_VERSION == 2 -#define CONFIG_SYS_FLASH_BASE4 0x40080000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#if CONFIG_NETTA2_VERSION == 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#elif CONFIG_NETTA2_VERSION == 2 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_OFFSET_REDUND 0 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 25000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 40000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 75000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif - -#elif CONFIG_XIN == 50000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 66666666 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 50MHz -#endif - -#else - -#error unsupported XIN freq -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#if CONFIG_NETTA2_VERSION == 2 - -#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */ - -#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#endif - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#define CONFIG_SYS_MAMR_PTA 234 - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/****************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define NAND_SIZE 0x00010000 /* 64K */ - -#define DSP_BASE 0xF1000000 -#define NAND_BASE 0xF1010000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*****************************************************************************/ - -#if CONFIG_NETTA2_VERSION == 1 -#define STATUS_LED_BIT 0x00000008 /* bit 28 */ -#elif CONFIG_NETTA2_VERSION == 2 -#define STATUS_LED_BIT 0x00000080 /* bit 24 */ -#endif - -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#ifndef __ASSEMBLY__ - -/* LEDs */ - -/* led_id_t is unsigned int mask */ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \ - else \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \ - } while(0) - -#define __led_init(msk, st) __led_set(msk, st) - -#endif - -/*********************************************************************************************************** - - ---------------------------------------------------------------------------------------------- - - (V1) version 1 of the board - (V2) version 2 of the board - - ---------------------------------------------------------------------------------------------- - - Pin definitions: - - +------+----------------+--------+------------------------------------------------------------ - | # | Name | Type | Comment - +------+----------------+--------+------------------------------------------------------------ - | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select - | PA7 | DSP_INT | Output | DSP interrupt - | PA10 | DSP_RESET | Output | DSP reset - | PA14 | USBOE | Output | USB (1) - | PA15 | USBRXD | Output | USB (1) - | PB19 | BT_RTS | Output | Bluetooth (0) - | PB23 | BT_CTS | Output | Bluetooth (0) - | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select - | PB27 | SPICS_DISP | Output | Display chip select - | PB28 | SPI_RXD_3V | Input | SPI Data Rx - | PB29 | SPI_TXD | Output | SPI Data Tx - | PB30 | SPI_CLK | Output | SPI Clock - | PC10 | DISPA0 | Output | Display A0 - | PC11 | BACKLIGHT | Output | Display backlit - | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD - | | IO_RESET | Output | (V2) General I/O reset - | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1) - | | HOOK | Input | (V2) Hook input interrupt - | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK - | | F_RY_BY | Input | (V2) NAND F_RY_BY - | PE17 | F_ALE | Output | NAND F_ALE - | PE18 | F_CLE | Output | NAND F_CLE - | PE20 | F_CE | Output | NAND F_CE - | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select - | | LED | Output | (V2) LED - | PE27 | SPICS_ER | Output | External serial register CS - | PE28 | LEDIO1 | Output | (V1) LED - | | BKBR1 | Input | (V2) Keyboard input scan - | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2) - | | BKBR2 | Input | (V2) Keyboard input scan - | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2) - | | BKBR3 | Input | (V2) Keyboard input scan - | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY - | | BKBR4 | Input | (V2) Keyboard input scan - +------+----------------+--------+--------------------------------------------------- - - ---------------------------------------------------------------------------------------------- - - Serial register input: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | 4 | HOOK | Hook switch - | 5 | BT_LINK | Bluetooth link status - | 6 | HOST_WAKE | Bluetooth host wake up - | 7 | OK_ETH | Cisco inline power OK status - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Chip selects: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | CS0 | CS0 | Boot flash - | CS1 | CS_FLASH | NAND flash - | CS2 | CS_DSP | DSP - | CS3 | DCS_DRAM | DRAM - | CS4 | CS_FLASH2 | (V2) 2nd flash - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IRQ1 | IRQ_DSP | DSP interrupt - | IRQ3 | S_INTER | DUSLIC ??? - | IRQ4 | F_RY_BY | NAND - | IRQ7 | IRQ_MAX | MAX 3100 interrupt - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts on PCMCIA pins: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface - | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface - | IP_A2| RMII1_MDINT | PHY interrupt for #1 - | IP_A3| RMII2_MDINT | PHY interrupt for #2 - | IP_A5| HOST_WAKE | (V2) Bluetooth host wake - | IP_A6| OK_ETH | (V2) Cisco inline power OK - +------+----------------+------------------------------------------------------------ - -**************************************************************************************************/ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 - -/*************************************************************************************************/ - -/* use board specific hardware */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG - -/*************************************************************************************************/ - -#define CONFIG_CDP_DEVICE_ID 20 -#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta2 */ -#define CONFIG_CDP_PORT_ID "eth%d" -#define CONFIG_CDP_CAPABILITIES 0x00000010 -#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME -#define CONFIG_CDP_PLATFORM "Intracom NetTA2" -#define CONFIG_CDP_TRIGGER 0x20020001 -#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */ -#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone ? */ - -/*************************************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 - -/*************************************************************************************************/ - -#define CONFIG_CRC32_VERIFY 1 - -/*************************************************************************************************/ - -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*************************************************************************************************/ -#endif /* __CONFIG_H */ diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 8601eec85e..ac75b9c5fb 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -14,23 +14,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_RAMBOOT_NAND -#endif - -#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_TEXT_BASE 0x11001000 - -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif /* CONFIG_NAND_SPL */ -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif @@ -162,7 +145,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */ #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE -#ifndef CONFIG_NAND #define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */ #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -179,11 +161,8 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#else -#define CONFIG_SYS_NO_FLASH -#endif -#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) +#if defined(CONFIG_SYS_SPL) #define CONFIG_SYS_RAMBOOT #endif @@ -239,17 +218,6 @@ extern unsigned long get_clock_freq(void); | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND -/* NAND Base Address */ -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -/* chip select 1 - BCSR */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \ - | BR_MS_GPCM | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ - | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ - | OR_GPCM_EAD) -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ /* chip select 1 - BCSR */ @@ -258,7 +226,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ | OR_GPCM_EAD) -#endif /* Serial Port * open - index 2 @@ -381,15 +348,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#else #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000) #define CONFIG_ENV_SIZE 0x2000 -#endif #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -496,15 +457,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_PHY_MARVELL #endif -#ifndef CONFIG_NAND /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#else -#define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR 0x1f00000 -#endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/QS823.h b/include/configs/QS823.h deleted file mode 100644 index 6733460425..0000000000 --- a/include/configs/QS823.h +++ /dev/null @@ -1,551 +0,0 @@ -/* - * (C) Copyright 2003 - * MuLogic B.V. - * - * (C) Copyright 2002 - * Simple Network Magic Corporation - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* various debug settings */ -#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */ -#undef CONFIG_SILENT_CONSOLE /* silent console */ -#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG_FLASH /* debug flash code */ -#undef FLASH_DEBUG /* debug fash code */ -#undef DEBUG_ENV /* debug environment code */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */ -#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_QS823 1 /* ...on a QS823 module */ -#define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* Select the target clock speed */ -#undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */ -#undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */ -#undef CONFIG_CLOCK_50MHZ /* cpu=49,971,200 Hz, mem=33Mhz */ -#define CONFIG_CLOCK_66MHZ 1 /* cpu=67,108,864 Hz, mem=66Mhz */ -#undef CONFIG_CLOCK_80MHZ /* cpu=79,986,688 Hz, mem=33Mhz */ - -#ifdef CONFIG_CLOCK_16MHZ -#define CONFIG_CLOCK_MULT 512 -#endif - -#ifdef CONFIG_CLOCK_33MHZ -#define CONFIG_CLOCK_MULT 1024 -#endif - -#ifdef CONFIG_CLOCK_50MHZ -#define CONFIG_CLOCK_MULT 1525 -#endif - -#ifdef CONFIG_CLOCK_66MHZ -#define CONFIG_CLOCK_MULT 2048 -#endif - -#ifdef CONFIG_CLOCK_80MHZ -#define CONFIG_CLOCK_MULT 2441 -#endif - -/* choose flash size, 4Mb or 8Mb */ -#define CONFIG_FLASH_4MB 1 /* board has 4Mb flash */ -#undef CONFIG_FLASH_8MB /* board has 8Mb flash */ - -#define CONFIG_CLOCK_BASE 32768 /* Base clock input freq */ - -#undef CONFIG_8xx_CONS_SMC1 -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ - -/* Define default IP addresses */ -#define CONFIG_IPADDR 192.168.1.99 /* own ip address */ -#define CONFIG_SERVERIP 192.168.1.19 /* used for tftp (not nfs?) */ - -/* message to say directly after booting */ -#define CONFIG_PREBOOT "echo '';" \ - "echo 'type:';" \ - "echo 'run boot_nfs to boot to NFS';" \ - "echo 'run boot_flash to boot to flash';" \ - "echo '';" \ - "echo 'run flash_rootfs to install a new rootfs';" \ - "echo 'run flash_env to clear the env sector';" \ - "echo 'run flash_rw to clear the rw fs';" \ - "echo 'run flash_uboot to install a new u-boot';" \ - "echo 'run flash_kernel to install a new kernel';" - -/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */ -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND "run boot_nfs" - -#undef CONFIG_BOOTARGS /* made by set_nfs of set_flash */ - -/* Our flash filesystem looks like this - * - * 4Mb board: - * ffc0 0000 - ffeb ffff root filesystem (jffs2) (~3Mb) - * ffec 0000 - ffed ffff read-write filesystem (ext2) - * ffee 0000 - ffef ffff environment - * fff0 0000 - fff1 ffff u-boot - * fff2 0000 - ffff ffff linux kernel - * - * 8Mb board: - * ff80 0000 - ffeb ffff root filesystem (jffs2) (~7Mb) - * ffec 0000 - ffed ffff read-write filesystem (ext2) - * ffee 0000 - ffef ffff environment - * fff0 0000 - fff1 ffff u-boot - * fff2 0000 - ffff ffff linux kernel - * - */ - -/* environment for 4Mb board */ -#ifdef CONFIG_FLASH_4MB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=QS823\0" \ - "hostname=qs823\0" \ - "netdev=eth0\0" \ - "ethaddr=00:01:02:B4:36:56\0" \ - "rootpath=/exports/rootfs\0" \ - "mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \ - /* fill in variables */ \ - "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \ - "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \ - "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \ - /* commands */ \ - "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \ - "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \ - /* reinstall flash parts */ \ - "flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \ - "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \ - "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \ - "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \ - "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0" -#endif /* CONFIG_FLASH_4MB */ - -/* environment for 8Mb board */ -#ifdef CONFIG_FLASH_8MB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=QS823\0" \ - "hostname=qs823\0" \ - "netdev=eth0\0" \ - "ethaddr=00:01:02:B4:36:56\0" \ - "rootpath=/exports/rootfs\0" \ - "mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \ - /* fill in variables */ \ - "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \ - "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \ - "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \ - /* commands */ \ - "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \ - "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \ - /* reinstall flash parts */ \ - "flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \ - "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \ - "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \ - "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \ - "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0" -#endif /* CONFIG_FLASH_8MB */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_STATUS_LED /* Status LED disabled */ -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN - - -/*----------------------------------------------------------------------- - * Environment variable storage is in FLASH, one sector before U-boot - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128Kb, one whole sector */ -#define CONFIG_ENV_SIZE 0x2000 /* 8kb */ -#define CONFIG_ENV_ADDR 0xffee0000 /* address of env sector */ - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/*----------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* Allow an 8Mbyte window */ - -#define FLASH_BASE0_4M_PRELIM 0xFFC00000 /* Base for 4M Flash */ -#define FLASH_BASE0_8M_PRELIM 0xFF800000 /* Base for 8M Flash */ - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 /* U-boot location */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * TODO flash parameters - * FLASH organization for Intel Strataflash - */ -#undef CONFIG_SYS_FLASH_16BIT /* 32-bit wide flash memory */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ - -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - */ - -/* MF (Multiplication Factor of SPLL) */ -/* Sets the QS823 to specified clock from 32KHz clock at EXTAL. */ -#define vPLPRCR_MF ((CONFIG_CLOCK_MULT+1) << 20) -#define CONFIG_SYS_PLPRCR (vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - */ -#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00) -#define CONFIG_SYS_BRGCLK_PRESCALE 1 -#endif - -#if defined(CONFIG_CLOCK_66MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01) -#define CONFIG_SYS_BRGCLK_PRESCALE 4 -#endif - -#if defined(CONFIG_CLOCK_80MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01) -#define CONFIG_SYS_BRGCLK_PRESCALE 4 -#endif - -#define SCCR_MASK CONFIG_SYS_SCCR - -/*----------------------------------------------------------------------- - * Debug Enable Register - * 0x73E67C0F - All interrupts handled by BDM - * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM - *----------------------------------------------------------------------- -#define CONFIG_SYS_DER 0x73E67C0F -#define CONFIG_SYS_DER 0x0082400F - - #------------------------------------------------------------------------- - # Program the Debug Enable Register (DER). This register provides the user - # with the reason for entering into the debug mode. We want all conditions - # to end up as an exception. We don't want to enter into debug mode for - # any condition. See the back of of the Development Support section of the - # MPC860 User Manual for a description of this register. - #------------------------------------------------------------------------- -*/ -#define CONFIG_SYS_DER 0 - -/*----------------------------------------------------------------------- - * Memory Controller Initialization Constants - *----------------------------------------------------------------------- - */ - -/* - * BR0 and OR0 (AMD dual FLASH devices) - * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation) - */ -#define CONFIG_SYS_PRELIM_OR_AM -#define CONFIG_SYS_OR_TIMING_FLASH - -/* - *----------------------------------------------------------------------- - * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32) - * flash that resides on the QS823. - *----------------------------------------------------------------------- - */ - -/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */ -/* represents a minumum 32K block size. */ -#define vBR0_BA ((0xFF80 << 16) + (0 << 15)) -#define CONFIG_SYS_BR0_PRELIM (vBR0_BA | BR_V) - -/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits */ -/* which defines a 8 Mbyte memory block. */ -#define vOR0_AM ((0xFF80 << 16) + (0 << 15)) - -#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ) -/* 0101 = Add a 5 clock cycle wait state */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK) -#endif - -#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ) -/* 0011 = Add a 3 clock cycle wait state */ -/* 29.8ns clock * (3 + 2) = 149ns cycle time */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK) -#endif - -#if defined(CONFIG_CLOCK_16MHZ) -/* 0010 = Add a 2 clock cycle wait state */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK) -#endif - -/* - * BR1 and OR1 (SDRAM) - * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation) - * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation) - * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation) - * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation) - */ - -#define SDRAM_BASE 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ - -/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which - * represents a 128 Mbyte block the DRAM in - * this address base. - */ -#define vOR1_AM ((0xF800 << 16) + (0 << 15)) -#define vBR1_BA ((0x0000 << 16) + (0 << 15)) -#define CONFIG_SYS_OR1 (vOR1_AM | OR_CSNT_SAM | OR_BI) -#define CONFIG_SYS_BR1 (vBR1_BA | BR_MS_UPMA | BR_V) - -/* Machine A Mode Register */ - -/* PTA Periodic Timer A */ - -#if defined(CONFIG_CLOCK_80MHZ) -#define vMAMR_PTA (19 << 24) -#endif - -#if defined(CONFIG_CLOCK_66MHZ) -#define vMAMR_PTA (16 << 24) -#endif - -#if defined(CONFIG_CLOCK_50MHZ) -#define vMAMR_PTA (195 << 24) -#endif - -#if defined(CONFIG_CLOCK_33MHZ) -#define vMAMR_PTA (131 << 24) -#endif - -#if defined(CONFIG_CLOCK_16MHZ) -#define vMAMR_PTA (65 << 24) -#endif - -/* For boards with 16M of SDRAM */ -#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */ -#define CONFIG_SYS_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\ -MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* For boards with 32M of SDRAM */ -#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */ -#define CONFIG_SYS_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\ -MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - - -/* Memory Periodic Timer Prescaler Register */ - -#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ) -/* Divide by 32 */ -#define CONFIG_SYS_MPTPR 0x02 -#endif - -#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ) -/* Divide by 16 */ -#define CONFIG_SYS_MPTPR 0x04 -#endif - -/* - * BR2 and OR2 (Unused) - * Base address = 0xF020_0000 - 0xF020_0FFF - * - */ -#define CONFIG_SYS_OR2_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR2_PRELIM 0xF0200000 - -/* - * BR3 and OR3 (External Bus CS3) - * Base address = 0xF030_0000 - 0xF030_0FFF - * - */ -#define CONFIG_SYS_OR3_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR3_PRELIM 0xF0300000 - -/* - * BR4 and OR4 (External Bus CS3) - * Base address = 0xF040_0000 - 0xF040_0FFF - * - */ -#define CONFIG_SYS_OR4_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR4_PRELIM 0xF0400000 - - -/* - * BR4 and OR4 (External Bus CS3) - * Base address = 0xF050_0000 - 0xF050_0FFF - * - */ -#define CONFIG_SYS_OR5_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR5_PRELIM 0xF0500000 - -/* - * BR6 and OR6 (Unused) - * Base address = 0xF060_0000 - 0xF060_0FFF - * - */ -#define CONFIG_SYS_OR6_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR6_PRELIM 0xF0600000 - -/* - * BR7 and OR7 (Unused) - * Base address = 0xF070_0000 - 0xF070_0FFF - * - */ -#define CONFIG_SYS_OR7_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR7_PRELIM 0xF0700000 - -/* - * Sanity checks - */ -#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) -#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/QS850.h b/include/configs/QS850.h deleted file mode 100644 index f11421387c..0000000000 --- a/include/configs/QS850.h +++ /dev/null @@ -1,551 +0,0 @@ -/* - * (C) Copyright 2003 - * MuLogic B.V. - * - * (C) Copyright 2002 - * Simple Network Magic Corporation - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* various debug settings */ -#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */ -#undef CONFIG_SILENT_CONSOLE /* silent console */ -#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG_FLASH /* debug flash code */ -#undef FLASH_DEBUG /* debug fash code */ -#undef DEBUG_ENV /* debug environment code */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */ -#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_QS850 1 /* ...on a QS850 module */ -#define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* Select the target clock speed */ -#undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */ -#undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */ -#undef CONFIG_CLOCK_50MHZ /* cpu=49,971,200 Hz, mem=33Mhz */ -#define CONFIG_CLOCK_66MHZ 1 /* cpu=67,108,864 Hz, mem=66Mhz */ -#undef CONFIG_CLOCK_80MHZ /* cpu=79,986,688 Hz, mem=33Mhz */ - -#ifdef CONFIG_CLOCK_16MHZ -#define CONFIG_CLOCK_MULT 512 -#endif - -#ifdef CONFIG_CLOCK_33MHZ -#define CONFIG_CLOCK_MULT 1024 -#endif - -#ifdef CONFIG_CLOCK_50MHZ -#define CONFIG_CLOCK_MULT 1525 -#endif - -#ifdef CONFIG_CLOCK_66MHZ -#define CONFIG_CLOCK_MULT 2048 -#endif - -#ifdef CONFIG_CLOCK_80MHZ -#define CONFIG_CLOCK_MULT 2441 -#endif - -/* choose flash size, 4Mb or 8Mb */ -#define CONFIG_FLASH_4MB 1 /* board has 4Mb flash */ -#undef CONFIG_FLASH_8MB /* board has 8Mb flash */ - -#define CONFIG_CLOCK_BASE 32768 /* Base clock input freq */ - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ - -/* Define default IP addresses */ -#define CONFIG_IPADDR 192.168.1.99 /* own ip address */ -#define CONFIG_SERVERIP 192.168.1.19 /* used for tftp (not nfs?) */ - -/* message to say directly after booting */ -#define CONFIG_PREBOOT "echo '';" \ - "echo 'type:';" \ - "echo 'run boot_nfs to boot to NFS';" \ - "echo 'run boot_flash to boot to flash';" \ - "echo '';" \ - "echo 'run flash_rootfs to install a new rootfs';" \ - "echo 'run flash_env to clear the env sector';" \ - "echo 'run flash_rw to clear the rw fs';" \ - "echo 'run flash_uboot to install a new u-boot';" \ - "echo 'run flash_kernel to install a new kernel';" - -/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */ -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND "run boot_nfs" - -#undef CONFIG_BOOTARGS /* made by set_nfs of set_flash */ - -/* Our flash filesystem looks like this - * - * 4Mb board: - * ffc0 0000 - ffeb ffff root filesystem (jffs2) (~3Mb) - * ffec 0000 - ffed ffff read-write filesystem (ext2) - * ffee 0000 - ffef ffff environment - * fff0 0000 - fff1 ffff u-boot - * fff2 0000 - ffff ffff linux kernel - * - * 8Mb board: - * ff80 0000 - ffeb ffff root filesystem (jffs2) (~7Mb) - * ffec 0000 - ffed ffff read-write filesystem (ext2) - * ffee 0000 - ffef ffff environment - * fff0 0000 - fff1 ffff u-boot - * fff2 0000 - ffff ffff linux kernel - * - */ - -/* environment for 4Mb board */ -#ifdef CONFIG_FLASH_4MB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=QS850\0" \ - "hostname=qs850\0" \ - "netdev=eth0\0" \ - "ethaddr=00:01:02:B4:36:56\0" \ - "rootpath=/exports/rootfs\0" \ - "mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \ - /* fill in variables */ \ - "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \ - "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \ - "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \ - /* commands */ \ - "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \ - "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \ - /* reinstall flash parts */ \ - "flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \ - "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \ - "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \ - "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \ - "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0" -#endif /* CONFIG_FLASH_4MB */ - -/* environment for 8Mb board */ -#ifdef CONFIG_FLASH_8MB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=QS850\0" \ - "hostname=qs850\0" \ - "netdev=eth0\0" \ - "ethaddr=00:01:02:B4:36:56\0" \ - "rootpath=/exports/rootfs\0" \ - "mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \ - /* fill in variables */ \ - "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \ - "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \ - "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \ - /* commands */ \ - "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \ - "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \ - /* reinstall flash parts */ \ - "flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \ - "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \ - "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \ - "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \ - "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0" -#endif /* CONFIG_FLASH_8MB */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_STATUS_LED /* Status LED disabled */ -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN - - -/*----------------------------------------------------------------------- - * Environment variable storage is in FLASH, one sector before U-boot - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128Kb, one whole sector */ -#define CONFIG_ENV_SIZE 0x2000 /* 8kb */ -#define CONFIG_ENV_ADDR 0xffee0000 /* address of env sector */ - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/*----------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* Allow an 8Mbyte window */ - -#define FLASH_BASE0_4M_PRELIM 0xFFC00000 /* Base for 4M Flash */ -#define FLASH_BASE0_8M_PRELIM 0xFF800000 /* Base for 8M Flash */ - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 /* U-boot location */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * TODO flash parameters - * FLASH organization for Intel Strataflash - */ -#undef CONFIG_SYS_FLASH_16BIT /* 32-bit wide flash memory */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ - -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - */ - -/* MF (Multiplication Factor of SPLL) */ -/* Sets the QS850 to specified clock from 32KHz clock at EXTAL. */ -#define vPLPRCR_MF ((CONFIG_CLOCK_MULT+1) << 20) -#define CONFIG_SYS_PLPRCR (vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - */ -#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00) -#define CONFIG_SYS_BRGCLK_PRESCALE 1 -#endif - -#if defined(CONFIG_CLOCK_66MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01) -#define CONFIG_SYS_BRGCLK_PRESCALE 4 -#endif - -#if defined(CONFIG_CLOCK_80MHZ) -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01) -#define CONFIG_SYS_BRGCLK_PRESCALE 4 -#endif - -#define SCCR_MASK CONFIG_SYS_SCCR - -/*----------------------------------------------------------------------- - * Debug Enable Register - * 0x73E67C0F - All interrupts handled by BDM - * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM - *----------------------------------------------------------------------- -#define CONFIG_SYS_DER 0x73E67C0F -#define CONFIG_SYS_DER 0x0082400F - - #------------------------------------------------------------------------- - # Program the Debug Enable Register (DER). This register provides the user - # with the reason for entering into the debug mode. We want all conditions - # to end up as an exception. We don't want to enter into debug mode for - # any condition. See the back of of the Development Support section of the - # MPC860 User Manual for a description of this register. - #------------------------------------------------------------------------- -*/ -#define CONFIG_SYS_DER 0 - -/*----------------------------------------------------------------------- - * Memory Controller Initialization Constants - *----------------------------------------------------------------------- - */ - -/* - * BR0 and OR0 (AMD dual FLASH devices) - * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation) - */ -#define CONFIG_SYS_PRELIM_OR_AM -#define CONFIG_SYS_OR_TIMING_FLASH - -/* - *----------------------------------------------------------------------- - * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32) - * flash that resides on the QS850. - *----------------------------------------------------------------------- - */ - -/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */ -/* represents a minumum 32K block size. */ -#define vBR0_BA ((0xFF80 << 16) + (0 << 15)) -#define CONFIG_SYS_BR0_PRELIM (vBR0_BA | BR_V) - -/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits */ -/* which defines a 8 Mbyte memory block. */ -#define vOR0_AM ((0xFF80 << 16) + (0 << 15)) - -#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ) -/* 0101 = Add a 5 clock cycle wait state */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK) -#endif - -#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ) -/* 0011 = Add a 3 clock cycle wait state */ -/* 29.8ns clock * (3 + 2) = 149ns cycle time */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK) -#endif - -#if defined(CONFIG_CLOCK_16MHZ) -/* 0010 = Add a 2 clock cycle wait state */ -#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK) -#endif - -/* - * BR1 and OR1 (SDRAM) - * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation) - * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation) - * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation) - * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation) - */ - -#define SDRAM_BASE 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ - -/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which - * represents a 128 Mbyte block the DRAM in - * this address base. - */ -#define vOR1_AM ((0xF800 << 16) + (0 << 15)) -#define vBR1_BA ((0x0000 << 16) + (0 << 15)) -#define CONFIG_SYS_OR1 (vOR1_AM | OR_CSNT_SAM | OR_BI) -#define CONFIG_SYS_BR1 (vBR1_BA | BR_MS_UPMA | BR_V) - -/* Machine A Mode Register */ - -/* PTA Periodic Timer A */ - -#if defined(CONFIG_CLOCK_80MHZ) -#define vMAMR_PTA (19 << 24) -#endif - -#if defined(CONFIG_CLOCK_66MHZ) -#define vMAMR_PTA (16 << 24) -#endif - -#if defined(CONFIG_CLOCK_50MHZ) -#define vMAMR_PTA (195 << 24) -#endif - -#if defined(CONFIG_CLOCK_33MHZ) -#define vMAMR_PTA (131 << 24) -#endif - -#if defined(CONFIG_CLOCK_16MHZ) -#define vMAMR_PTA (65 << 24) -#endif - -/* For boards with 16M of SDRAM */ -#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */ -#define CONFIG_SYS_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\ -MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* For boards with 32M of SDRAM */ -#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */ -#define CONFIG_SYS_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\ -MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - - -/* Memory Periodic Timer Prescaler Register */ - -#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ) -/* Divide by 32 */ -#define CONFIG_SYS_MPTPR 0x02 -#endif - -#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ) -/* Divide by 16 */ -#define CONFIG_SYS_MPTPR 0x04 -#endif - -/* - * BR2 and OR2 (Unused) - * Base address = 0xF020_0000 - 0xF020_0FFF - * - */ -#define CONFIG_SYS_OR2_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR2_PRELIM 0xF0200000 - -/* - * BR3 and OR3 (External Bus CS3) - * Base address = 0xF030_0000 - 0xF030_0FFF - * - */ -#define CONFIG_SYS_OR3_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR3_PRELIM 0xF0300000 - -/* - * BR4 and OR4 (External Bus CS3) - * Base address = 0xF040_0000 - 0xF040_0FFF - * - */ -#define CONFIG_SYS_OR4_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR4_PRELIM 0xF0400000 - - -/* - * BR4 and OR4 (External Bus CS3) - * Base address = 0xF050_0000 - 0xF050_0FFF - * - */ -#define CONFIG_SYS_OR5_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR5_PRELIM 0xF0500000 - -/* - * BR6 and OR6 (Unused) - * Base address = 0xF060_0000 - 0xF060_0FFF - * - */ -#define CONFIG_SYS_OR6_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR6_PRELIM 0xF0600000 - -/* - * BR7 and OR7 (Unused) - * Base address = 0xF070_0000 - 0xF070_0FFF - * - */ -#define CONFIG_SYS_OR7_PRELIM 0xFFF00000 -#define CONFIG_SYS_BR7_PRELIM 0xF0700000 - -/* - * Sanity checks - */ -#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) -#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h deleted file mode 100644 index 9958c09d71..0000000000 --- a/include/configs/QS860T.h +++ /dev/null @@ -1,390 +0,0 @@ -/* - * (C) Copyright 2003 - * MuLogic B.V. - * - * (C) Copyright 2002 - * Simple Network Magic Corporation - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* various debug settings */ -#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */ -#undef CONFIG_SILENT_CONSOLE /* silent console */ -#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */ -#undef DEBUG_FLASH /* debug flash code */ -#undef FLASH_DEBUG /* debug fash code */ -#undef DEBUG_ENV /* debug environment code */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */ -#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ - - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 /* This is a MPC860 CPU */ -#define CONFIG_QS860T 1 /* ...on a QS860T module */ - -/* Start address of 512K Socketed Flash */ -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_FEC_ENET 1 /* FEC 10/100BaseT ethernet */ -#define CONFIG_MII -#define FEC_INTERRUPT SIU_LEVEL1 -#undef CONFIG_SCC1_ENET /* SCC1 10BaseT ethernet */ -#define CONFIG_SYS_DISCOVER_PHY - -#undef CONFIG_8xx_CONS_SMC1 -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC */ -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -/* Pass clocks to Linux 2.4.18 in Hz */ -#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;" \ - "echo 'Type \\\"run flash_nfs\\\" to mount root filesystem over NFS';" \ - "echo" - -#undef CONFIG_BOOTARGS -/* TODO compare against CADM860 */ -#define CONFIG_BOOTCOMMAND "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_STATUS_LED /* Status LED disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE - - -/* TODO */ -#if 0 -/* Look at these */ -CONFIG_IPADDR -CONFIG_SERVERIP -CONFIG_I2C -CONFIG_SPI -#endif - -/* - * Environment variable storage is in NVRAM - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_SIZE 0x00001000 /* We use only the last 4K for PPCBoot */ -#define CONFIG_ENV_ADDR 0xD100E000 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* TODO - size? */ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/*----------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* TODO flash parameters */ -/*----------------------------------------------------------------------- - * FLASH organization for Intel Strataflash - */ -#define CONFIG_SYS_FLASH_16BIT 1 /* 16-bit wide flash memory */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#undef CONFIG_ENV_IS_IN_FLASH - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI) -#else -#define CONFIG_SYS_SYPCR 0xFFFFFF88 -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR 0x00620000 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_TBSCR 0x00C3 - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PISCR 0x0082 - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PLPRCR 0x0090D000 - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR 0x02000000 - - -/*----------------------------------------------------------------------- - * Debug Enable Register - * 0x73E67C0F - All interrupts handled by BDM - * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM - *----------------------------------------------------------------------- -#define CONFIG_SYS_DER 0x73E67C0F -*/ -#define CONFIG_SYS_DER 0x0082400F - - -/*----------------------------------------------------------------------- - * Memory Controller Initialization Constants - *----------------------------------------------------------------------- - */ - -/* - * BR0 and OR0 (AMD 512K Socketed FLASH) - * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation) - */ -#define CONFIG_SYS_PRELIM_OR_AM -#define CONFIG_SYS_OR_TIMING_FLASH - -#define FLASH_BASE0_PRELIM 0xFFF00001 -#define CONFIG_SYS_OR0_PRELIM 0xFFF80D42 -#define CONFIG_SYS_BR0_PRELIM 0xFFF00401 - - -/* - * BR1 and OR1 (Intel 8M StrataFLASH) - * Base address = 0xD000_0000 - 0xD07F_FFFF - */ - -#define FLASH_BASE1_PRELIM 0xD0000000 -#define CONFIG_SYS_OR1_PRELIM 0xFF800D42 -#define CONFIG_SYS_BR1_PRELIM 0xD0000801 -/* #define CONFIG_SYS_OR1 0xFF800D42 */ -/* #define CONFIG_SYS_BR1 0xD0000801 */ - - -/* - * BR2 and OR2 (SDRAM) - * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation) - * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation) - * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation) - * - */ -#define SDRAM_BASE 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ - -/* SDRAM timing */ -#define SDRAM_TIMING 0x00000A00 - -/* For boards with 16M of SDRAM */ -#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */ -#define CONFIG_SYS_16M_MBMR 0x18802114 /* Mem Periodic Timer Prescaler */ - -/* For boards with 64M of SDRAM */ -#define SDRAM_64M_MAX_SIZE 0x04000000 /* max 64MB SDRAM */ -/* TODO - determine real value */ -#define CONFIG_SYS_64M_MBMR 0x18802114 /* Mem Period Timer Prescaler */ - -#define CONFIG_SYS_OR2 (SDRAM_PRELIM_OR_AM | SDRAM_TIMING) -#define CONFIG_SYS_BR2 (SDRAM_BASE | 0x000000C1) - - -/* - * BR3 and OR3 (NVRAM, Sipex, NAND Flash) - * Base address = 0xD100_0000 - 0xD100_FFFF (64K NVRAM) - * Base address = 0xD108_0000 - 0xD108_0000 (Sipex chip ctl register) - * Base address = 0xD110_0000 - 0xD110_0000 (NAND ctl register) - * Base address = 0xD138_0000 - 0xD138_0000 (LED ctl register) - * - */ - -#define CONFIG_SYS_OR3_PRELIM 0xFFC00DF6 -#define CONFIG_SYS_BR3_PRELIM 0xD1000401 -/* #define CONFIG_SYS_OR3 0xFFC00DF6 */ -/* #define CONFIG_SYS_BR3 0xD1000401 */ - - -/* - * BR4 and OR4 (Unused) - * Base address = 0xE000_0000 - 0xE3FF_FFFF - * - */ - -#define CONFIG_SYS_OR4_PRELIM 0xFF000000 -#define CONFIG_SYS_BR4_PRELIM 0xE0000000 -/* #define CONFIG_SYS_OR4 0xFF000000 */ -/* #define CONFIG_SYS_BR4 0xE0000000 */ - - -/* - * BR5 and OR5 (Expansion bus) - * Base address = 0xE400_0000 - 0xE7FF_FFFF - * - */ - -#define CONFIG_SYS_OR5_PRELIM 0xFF000000 -#define CONFIG_SYS_BR5_PRELIM 0xE4000000 -/* #define CONFIG_SYS_OR5 0xFF000000 */ -/* #define CONFIG_SYS_BR5 0xE4000000 */ - - -/* - * BR6 and OR6 (Expansion bus) - * Base address = 0xE800_0000 - 0xEBFF_FFFF - * - */ - -#define CONFIG_SYS_OR6_PRELIM 0xFF000000 -#define CONFIG_SYS_BR6_PRELIM 0xE8000000 -/* #define CONFIG_SYS_OR6 0xFF000000 */ -/* #define CONFIG_SYS_BR6 0xE8000000 */ - - -/* - * BR7 and OR7 (Expansion bus) - * Base address = 0xEC00_0000 - 0xEFFF_FFFF - * - */ - -#define CONFIG_SYS_OR7_PRELIM 0xFF000000 -#define CONFIG_SYS_BR7_PRELIM 0xE8000000 -/* #define CONFIG_SYS_OR7 0xFF000000 */ -/* #define CONFIG_SYS_BR7 0xE8000000 */ - -/* - * Sanity checks - */ -#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) -#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h deleted file mode 100644 index e7e061cb3e..0000000000 --- a/include/configs/RBC823.h +++ /dev/null @@ -1,407 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Modified by Udi Finkelstein udif@udif.com - * For the RBC823 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_RBC823 1 /* ...on a RBC823 module */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#if 0 -#define DEBUG 1 -#define CONFIG_LAST_STAGE_INIT -#endif -#define CONFIG_KEYBOARD 1 /* This board has a custom keybpard */ -#define CONFIG_LCD 1 /* use LCD controller ... */ -#define CONFIG_MPC8XX_LCD -#define CONFIG_HITACHI_SP19X001_Z1A /* The LCD type we use */ - -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_SMC1 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ -#if 1 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ -#define CONFIG_8xx_GCLK_FREQ 48000000L - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#undef CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#undef CONFIG_RTC_MPC8xx /* don't use internal RTC of MPC8xx (no battery) */ - -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 40000 -#define CONFIG_SYS_I2C_SLAVE 0xfe -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_WRITE_DELAY_MS 10 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_BMP -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_KGDB -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM - -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x0100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -/* -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -*/ -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -/* - * for 48 MHz, we use a 4 MHz clock * 12 - */ -#define CONFIG_SYS_PLPRCR \ - ( (12-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_LOLRE ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_RTDIV | SCCR_RTSEL | SCCR_CRQEN | \ - SCCR_PRQEN | SCCR_EBDF00 | \ - SCCR_COM01 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD001 | \ - SCCR_DFALCD00) - -#ifdef NOT_USED -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x04000000 /* D.O.C Millenium */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */ - -/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR) - -#define CONFIG_SYS_OR_TIMING_MSYS (OR_ACS_DIV1 | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V) - -#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS) -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \ - BR_PS_8 | BR_V) - -/* - * BR4 and OR4 (SDRAM) - * - */ -#define SDRAM_BASE4_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* - * SDRAM timing: - */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM) - -#define CONFIG_SYS_OR4_PRELIM (~(SDRAM_MAX_SIZE-1) | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR4_PRELIM ((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 187 /* start with divider for 48 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h deleted file mode 100644 index 50c82c68eb..0000000000 --- a/include/configs/RPXlite_DW.h +++ /dev/null @@ -1,462 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-BOOT port on RPXlite board - */ - -/* - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * U-BOOT port on RPXlite DW version board--RPXlite_DW - * June 8 ,2004 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -/* #define DEBUG 1 */ -/* #define DEPLOYMENT 1 */ - -#undef CONFIG_MPC860 -#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ -#define CONFIG_RPXLITE 1 /* RPXlite DW version board */ - -#define CONFIG_SYS_TEXT_BASE 0xff000000 - -#ifdef CONFIG_LCD /* with LCD controller ? */ -#define CONFIG_MPC8XX_LCD -#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ -#endif - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */ - -#ifdef DEBUG -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */ - -#ifdef DEPLOYMENT -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "autoboot in %d seconds (stop with 'st')...\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR "st" -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 1 -#define CONFIG_BOOT_RETRY_MIN 1 -#endif /* DEPLOYMENT */ -#endif /* DEBUG */ - -/* pre-boot commands */ -#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" - -#undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "gatewayip=172.16.115.254\0" \ - "netmask=255.255.255.0\0" \ - "kernel_addr=ff040000\0" \ - "ramdisk_addr=ff200000\0" \ - "ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} " \ - "${filesize};md ${kernel_addr};" \ - "echo kernel updating finished\0" \ - "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \ - "${filesize};md ff000000;" \ - "echo u-boot updating finished\0" \ - "eu=protect off 1:6;era 1:6;reset\0" \ - "lcd=setenv stdout lcd;setenv stdin lcd\0" \ - "ser=setenv stdout serial;setenv stdin serial\0" \ - "verify=no" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you - don't want the advanced function */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_DHCP - -#ifdef CONFIG_SPLASH_SCREEN -#define CONFIG_CMD_BMP -#endif - - -/* test-only */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ - -#define CONFIG_NETCONSOLE - -#endif /* 1 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "u-boot>" /* Monitor Command Prompt */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#if defined(DEBUG) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif - -#define CONFIG_SYS_MONITOR_BASE 0xFF000000 -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_ADDR 0xFA000100 -#define CONFIG_ENV_SIZE 0x1000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x30000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ -#endif /* CONFIG_ENV_IS_IN_NVRAM */ - -#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res))) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 32-bit 12-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif /* We can get SYPCR: 0xFFFF0689. */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 32-bit 12-30 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) /* SIUMCR:0x00000800 */ - -/*--------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 16-bit 12-16 - *--------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) -/* TBSCR: 0x00C3 [SAM] */ - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 16-bit 12-18 - *----------------------------------------------------------------------- - * [RTC enabled but not stopped on FRZ] - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1 */ - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 16-bit 12-23 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - * [Periodic timer enabled,Periodic timer interrupt disable. ] - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) /* PISCR:0x0083 */ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 32-bit 5-7 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - */ -/* up to 64 MHz we use a 1:2 clock */ -#if defined(RPXlite_64MHz) -#define CONFIG_SYS_PLPRCR ( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) /*PLPRCR: 0x00700000. */ -#else -#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) -#endif - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 5-3 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */ -#if defined(RPXlite_64MHz) -#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */ -#else -#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ -#endif - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ -#define FLASH_BASE_PRELIM 0xFC000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFC000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB in system */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 -#define CONFIG_SYS_OR_AM_SDRAM (-(SDRAM_MAX_SIZE & OR_AM_MSK)) -#define CONFIG_SYS_OR1_PRELIM ( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXlite mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */ -#define CONFIG_SYS_OR3_PRELIM 0xFF7F8900 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0040 - -/* - * Memory Periodic Timer Prescaler - */ -/* periodic timer for refresh */ -#if defined(RPXlite_64MHz) -#define CONFIG_SYS_MAMR_PTA 32 -#else -#define CONFIG_SYS_MAMR_PTA 20 -#endif - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2 - -/* - * MAMR settings for SDRAM - */ - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10) -/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */ - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* Configuration variable added by yooth. */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* - * BCSRx - * - * Board Status and Control Registers - * - */ -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR1_SMC1CTS 0x40 /* Added by SAM. */ -#define BCSR1_SMC1TRS 0x80 /* Added by SAM. */ - -#define BCSR2_ENRTCIRQ 0x01 /* Added by SAM. */ -#define BCSR2_ENBRG1 0x04 /* Added by SAM. */ - -#define BCSR2_ENPA5HDR 0x08 /* USB Control */ -#define BCSR2_ENUSBCLK 0x10 -#define BCSR2_USBPWREN 0x20 -#define BCSR2_USBSPD 0x40 -#define BCSR2_USBSUSP 0x80 - -#define BCSR3_BWKAPWR 0x01 /* Changed by SAM. Backup battery situation */ -#define BCSR3_IRQRTC 0x02 /* Changed by SAM. NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Changed by SAM. Flash Operation */ -#define BCSR3_MPLX_LIN 0x08 /* Changed by SAM. Linear or Multiplexed address Mode */ - -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - -/* - * Environment setting - */ -#define CONFIG_ETHADDR 00:10:EC:00:37:5B -#define CONFIG_IPADDR 172.16.115.7 -#define CONFIG_SERVERIP 172.16.115.6 -#define CONFIG_ROOTPATH "/workspace/myfilesystem/target/" -#define CONFIG_BOOTFILE "uImage.rpxusb" -#define CONFIG_HOSTNAME LITE_H1_DW - -#endif /* __CONFIG_H */ diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h deleted file mode 100644 index a1e2ae9753..0000000000 --- a/include/configs/Rattler.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * - * U-Boot configuration for Analogue&Micro Rattler boards. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_MPC8248 -#define CPU_ID_STR "MPC8248" -#else -#define CPU_ID_STR "MPC8250" -#endif /* CONFIG_MPC8248 */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_RATTLER /* Analogue&Micro Rattler board */ - -/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ - -/* - * Select ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, - * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for - * SCC, 1-3 for FCC) - * - * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CONFIG_CMD_NET - * must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ -#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ - -#ifdef CONFIG_ETHER_ON_FCC - -#define CONFIG_ETHER_INDEX 1 /* FCC1 is used for Ethernet */ - -#if (CONFIG_ETHER_INDEX == 1) - -/* - Rx clock is CLK11 - * - Tx clock is CLK10 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#elif (CONFIG_ETHER_INDEX == 2) - -/* - Rx clock is CLK15 - * - Tx clock is CLK14 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#define MDIO_ACTIVE (iop->pdir |= 0x00400000) -#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) -#define MDIO_READ ((iop->pdat & 0x00400000) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - -#define MDC(bit) if(bit) iop->pdat |= 0x00800000; \ - else iop->pdat &= ~0x00800000 - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 100000000 /* in Hz */ -#endif - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm FE040000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#if defined(CONFIG_CMD_JFFS2) -#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00100000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=rattler-0" -#define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)" -*/ -#endif /* CONFIG_CMD_JFFS2 */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ - -#define CONFIG_ENV_IS_IN_FLASH - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -#define CONFIG_SYS_DEFAULT_IMMR 0xFF010000 - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 32 -#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00000041) -#define CONFIG_SYS_SDRAM_OR 0xFE002EC0 - -#define CONFIG_SYS_BCSR 0xFC000000 - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER 0x0A06875A /* Not used - provided by FPGA */ -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x0E04C000 -#define CONFIG_SYS_SYPCR 0xFFFFFFC3 -#define CONFIG_SYS_BCR 0x00000000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_PSDMR 0x8249A452 -#define CONFIG_SYS_PSRT 0x1F -#define CONFIG_SYS_MPTPR 0x2000 - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001001) -#define CONFIG_SYS_OR0_PRELIM 0xFF001ED6 -#define CONFIG_SYS_BR7_PRELIM (CONFIG_SYS_BCSR | 0x00000801) -#define CONFIG_SYS_OR7_PRELIM 0xFFFF87F6 - -#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h deleted file mode 100644 index 46157ccc40..0000000000 --- a/include/configs/SIMPC8313.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - * Copyright (C) Sheldon Instruments, Inc. 2008 - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * simpc8313 board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_NAND_U_BOOT - -#define CONFIG_E300 1 -#define CONFIG_MPC831x 1 -#define CONFIG_MPC8313 1 - -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - -#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */ -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 - -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_FSL_ELBC 1 - -#define CONFIG_MISC_INIT_R - -/* - * On-board devices - * - * TSEC1 is Marvell PHY 88E1118 - */ - -#define CONFIG_SYS_33MHZ - -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ - -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -#define CONFIG_SYS_IMMR 0xE0000000 - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00001000 -#define CONFIG_SYS_MEMTEST_END 0x07f00000 - -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ - -/* - * Device configurations - */ -#define CONFIG_TSEC1 - -/* - * DDR Setup - */ - /* DDR is system memory*/ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE - -#define CONFIG_VERY_BIG_RAM -#define CONFIG_MAX_MEM_MAPPED (512 << 20) - -#define CONFIG_SYS_DDRCDR (DDRCDR_EN \ - | DDRCDR_PZ_NOMZ \ - | DDRCDR_NZ_NOMZ \ - | DDRCDR_M_ODR) - /* 0x73000002 TODO ODR & DRN ? */ - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_NO_FLASH - -#if !defined(CONFIG_NAND_SPL) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* - * Local Bus LCRR and LBCR regs - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \ - | (0xFF << LBCR_BMT_SHIFT) \ - | 0xF) /* 0x0004ff0f */ - - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* drivers/mtd/nand/nand.c */ -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xFFF00000 -#else -#define CONFIG_SYS_NAND_BASE 0xE2800000 -#endif -#define CONFIG_SYS_FPGA_BASE 0xFF000000 - -#define CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_NAND_FSL_ELBC 1 - -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit Port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ - -#ifdef CONFIG_NAND_SP -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ - /* NAND chip block size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) -#define NAND_CACHE_PAGES 32 -#elif defined(CONFIG_NAND_LP) -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB \ - | OR_FCM_PGS \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 /* NAND chip page size */ - /* NAND chip block size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define NAND_CACHE_PAGES 64 -#else -#error Page size of NAND not defined. -#endif /* CONFIG_NAND_SP */ - -#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SYS_NAND_BLOCK_SIZE - -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_NAND_BASE - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA_BASE \ - | BR_PS_16 \ - | BR_MS_UPMA \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_2MB \ - | OR_UPM_BCTLD) - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_2MB) - -/* - * JFFS2 configuration - */ -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "nand0" - -/* mtdparts command line support */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=nand0" -#define MTDPARTS_DEFAULT "mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)" - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -/* - * TSEC - */ -#define CONFIG_TSEC_ENET /* TSEC ethernet support */ - -#define CONFIG_GMII /* MII PHY management */ - -#ifdef CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 0x0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC1_PHYIDX 0 -#endif - -#ifdef CONFIG_TSEC2 -#define CONFIG_HAS_ETH1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define TSEC2_PHY_ADDR 4 -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC2_PHYIDX 0 -#endif - - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC1" - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Environment - */ -#if defined(CONFIG_NAND_U_BOOT) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_OFFSET (768 * 1024) - #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) - #define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) -#elif !defined(CONFIG_SYS_RAMBOOT) - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 - -/* Address and size of Redundant Environment Sector */ -#else - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_JFFS2 - -#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) \ - + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ - -#define CONFIG_SYS_HRCW_LOW (HRCWL_LCL_BUS_TO_SCB_CLK_1X1 \ - | 0x20000000 /* reserved */ \ - | HRCWL_DDR_TO_SCB_CLK_2X1 \ - | HRCWL_CSB_TO_CLKIN_4X1 \ - | HRCWL_CORE_TO_CSB_2_5X1) - -#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 4) - -#define CONFIG_SYS_HRCW_HIGH_BASE (HRCWH_PCI_HOST \ - | HRCWH_PCI1_ARBITER_ENABLE \ - | HRCWH_CORE_ENABLE \ - | HRCWH_BOOTSEQ_DISABLE \ - | HRCWH_SW_WATCHDOG_DISABLE \ - | HRCWH_TSEC1M_IN_RGMII \ - | HRCWH_TSEC2M_IN_RGMII \ - | HRCWH_BIG_ENDIAN \ - | HRCWH_LALE_NORMAL) - -#ifdef CONFIG_NAND_LP -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE \ - | HRCWH_FROM_0XFFF00100 \ - | HRCWH_ROM_LOC_NAND_LP_8BIT \ - | HRCWH_RL_EXT_NAND) -#else -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE \ - | HRCWH_FROM_0XFFF00100 \ - | HRCWH_ROM_LOC_NAND_SP_8BIT \ - | HRCWH_RL_EXT_NAND) -#endif - -/* System IO Config */ -#define CONFIG_SYS_SICRH (SICRH_ETSEC2_B \ - | SICRH_ETSEC2_C \ - | SICRH_ETSEC2_D \ - | SICRH_ETSEC2_E \ - | SICRH_ETSEC2_F \ - | SICRH_ETSEC2_G \ - | SICRH_TSOBI1 \ - | SICRH_TSOBI2) -#define CONFIG_SYS_SICRL (SICRL_LBC \ - | SICRL_USBDR_10 \ - | SICRL_ETSEC2_A) - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ - | HID0_ENABLE_INSTRUCTION_CACHE \ - | HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) - -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \ - | BATL_PP_RW) -#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI @ 0x80000000 */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI2 not supported on 8313 */ -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ - | BATL_PP_RW \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_NETDEV "eth1" - -#define CONFIG_HOSTNAME simpc8313 -#define CONFIG_ROOTPATH "/tftpboot/" -#define CONFIG_BOOTFILE "/tftpboot/uImage" - /* U-Boot image on TFTP server */ -#define CONFIG_UBOOTPATH "u-boot-nand.bin" -#define CONFIG_FDTFILE "simpc8313.dtb" - - /* default location for tftp and bootm */ -#define CONFIG_LOADADDR 500000 -#define CONFIG_BOOTDELAY 5 /* 5 second delay */ -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTCOMMAND "nand read $loadaddr kernel 600000;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ - "ethprime=TSEC1\0" \ - "uboot=" CONFIG_UBOOTPATH "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "fdtaddr=ae0000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ - "console=ttyS0\0" \ - "setbootargs=setenv bootargs " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ - "$netdev:off " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "load_uboot=tftp 100000 u-boot-nand.bin\0" \ - "burn_uboot=nand erase u-boot 80000; " \ - "nand write 100000 u-boot $filesize\0" \ - "update_uboot=run load_uboot;run burn_uboot\0" \ - "mtdids=nand0=nand0\0" \ - "mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw " \ - "console=ttyS0,115200\0" \ - "" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setbootargs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#endif /* __CONFIG_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 2215ac86ab..f2a75aed43 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -201,6 +201,12 @@ unsigned long get_board_ddr_clk(void); CSPR_MSEL_NOR | \ CSPR_V) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) + +/* + * TDM Definition + */ +#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 + /* NOR Flash Timing Params */ #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index e564cb7f53..8d6c51bb37 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -230,6 +230,12 @@ CSPR_MSEL_NOR | \ CSPR_V) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) + +/* + * TDM Definition + */ +#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 + /* NOR Flash Timing Params */ #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 8dd2e492ba..59d142e97e 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -227,8 +227,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h deleted file mode 100644 index d76a140728..0000000000 --- a/include/configs/ZPC1900.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * Copyright (C) 2003-2005 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * - * U-Boot configuration for Zephyr Engineering ZPC.1900 board. - * This port was developed and tested on Revision C board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CPU_ID_STR "MPC8265" -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ - -/* - * Select ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, - * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for - * SCC, 1-3 for FCC) - * - * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CONFIG_CMD_NET - * must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ -#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ - -#ifdef CONFIG_ETHER_ON_FCC - -#define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */ - -#if (CONFIG_ETHER_INDEX == 2) -/* - * - Rx clock is CLK13 - * - Tx clock is CLK14 - * - Select bus for bd/buffers (see 28-13) - * - Full duplex - */ -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#define MDIO_ACTIVE (iop->pdir |= 0x00400000) -#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) -#define MDIO_READ ((iop->pdat & 0x00400000) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - -#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ -#endif - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03800000 /* 1 ... 56 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 64 - -#define CONFIG_SYS_IMMR 0xF0000000 -#define CONFIG_SYS_LSDRAM_BASE 0xFC000000 -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_BCSR 0xFEA00000 -#define CONFIG_SYS_EEPROM 0xFEB00000 -#define CONFIG_SYS_FLSIMM_BASE 0xFF000000 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLSIMM_BASE } - -#define BCSR_PCI_MODE 0x01 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\ - HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\ - HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10 |\ - HRCW_MODCK_H0111 \ - ) /* 0x16848207 */ -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if !defined(CONFIG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_NVRAM) -#define CONFIG_ENV_IS_IN_NVRAM 1 -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH -# define CONFIG_ENV_SECT_SIZE 0x10000 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#else -# define CONFIG_ENV_ADDR (CONFIG_SYS_EEPROM + 0x400) -# define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_SYS_NVRAM_ACCESS_ROUTINE -#endif - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT (HID0_ICFI) -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x42200000 -#define CONFIG_SYS_SYPCR 0xFFFFFFC3 -#define CONFIG_SYS_BCR 0x90000000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_PSDMR /* 0x834DA43B */0x014DA43A -#define CONFIG_SYS_PSRT 0x0F/* 0x0C */ -#define CONFIG_SYS_LSDMR 0x0085A562 -#define CONFIG_SYS_LSRT 0x0F -#define CONFIG_SYS_MPTPR 0x4000 - -#define CONFIG_SYS_PSDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00000041) -#define CONFIG_SYS_PSDRAM_OR 0xFC0028C0 -#define CONFIG_SYS_LSDRAM_BR (CONFIG_SYS_LSDRAM_BASE | 0x00001861) -#define CONFIG_SYS_LSDRAM_OR 0xFF803480 - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00000801) -#define CONFIG_SYS_OR0_PRELIM 0xFFE00856 -#define CONFIG_SYS_BR5_PRELIM (CONFIG_SYS_EEPROM | 0x00000801) -#define CONFIG_SYS_OR5_PRELIM 0xFFFF03F6 -#define CONFIG_SYS_BR6_PRELIM (CONFIG_SYS_FLSIMM_BASE | 0x00001801) -#define CONFIG_SYS_OR6_PRELIM 0xFF000856 -#define CONFIG_SYS_BR7_PRELIM (CONFIG_SYS_BCSR | 0x00000801) -#define CONFIG_SYS_OR7_PRELIM 0xFFFF83F6 - -#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 762f6d2e4b..a48b386477 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -18,6 +18,21 @@ #include <configs/ti_am335x_common.h> +#ifndef CONFIG_SPL_BUILD +# define CONFIG_FIT +# define CONFIG_TIMESTAMP +# define CONFIG_LZO +# ifdef CONFIG_ENABLE_VBOOT +# define CONFIG_OF_CONTROL +# define CONFIG_OF_SEPARATE +# define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack +# define CONFIG_FIT_SIGNATURE +# define CONFIG_RSA +# endif +#endif + +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 4407b454dd..ad4cbd88b8 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -329,6 +329,7 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index d5e6c4b0dc..974ce986e9 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -32,11 +32,15 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_MULTI_EEPROMS +/* Power */ +#define CONFIG_POWER_TPS65218 + /* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ @@ -48,15 +52,24 @@ * Since SPL did pll and ddr initialization for us, * we don't need to do it twice. */ -#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) #define CONFIG_SKIP_LOWLEVEL_INIT #endif +/* + * When building U-Boot such that there is no previous loader + * we need to call board_early_init_f. This is taken care of in + * s_init when we have SPL used. + */ +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) +#define CONFIG_BOARD_EARLY_INIT_F +#endif + /* Now bring in the rest of the common code. */ #include <configs/ti_armv7_common.h> -/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) +/* Always 64 KiB env size */ +#define CONFIG_ENV_SIZE (64 << 10) #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -86,6 +99,30 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_AM437X_USB2PHY2_HOST +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x30000000 +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ +#define CONFIG_ENV_OFFSET 0x110000 +#define CONFIG_ENV_OFFSET_REDUND 0x120000 +#ifdef MTDIDS_DEFAULT +#undef MTDIDS_DEFAULT +#endif +#ifdef MTDPARTS_DEFAULT +#undef MTDPARTS_DEFAULT +#endif +#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \ + "512k(QSPI.u-boot.backup)," \ + "512k(QSPI.u-boot-spl-os)," \ + "64k(QSPI.u-boot-env)," \ + "64k(QSPI.u-boot-env.backup)," \ + "8m(QSPI.kernel)," \ + "-(QSPI.file-system)" +#endif + /* SPI */ #undef CONFIG_OMAP3_SPI #define CONFIG_TI_QSPI @@ -94,6 +131,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_TI_SPI_MMAP +#define CONFIG_SPI_FLASH_BAR #define CONFIG_QSPI_SEL_GPIO 48 #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 @@ -145,6 +183,7 @@ "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=mmc dev ${mmcdev}; " \ "setenv devnum ${mmcdev}; " \ + "setenv devtype mmc; " \ "if mmc rescan; then " \ "echo SD/MMC found on device ${devnum};" \ "if run loadbootenv; then " \ @@ -187,6 +226,8 @@ "setenv fdtfile am43x-epos-evm.dtb; fi; " \ "if test $board_name = AM43__GP; then " \ "setenv fdtfile am437x-gp-evm.dtb; fi; " \ + "if test $board_name = AM43__SK; then " \ + "setenv fdtfile am437x-sk-evm.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree; fi; \0" diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 515facfd67..370db821a8 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -224,11 +224,13 @@ /* PMIC */ #define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_MAX77686 +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX77686 #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale +#define CONFIG_PREBOOT + /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_SMC911X diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index ccfda71c95..db5d5ea846 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_AT91SAM9M10G45EK -#define CONFIG_AT91FAMILY #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -34,6 +33,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -115,6 +116,20 @@ #endif +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII @@ -126,7 +141,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 -#define CONFIG_DOS_PARTITION #define CONFIG_USB_STORAGE #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -134,6 +148,7 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 +#ifdef CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env in nandflash */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0xc0000 @@ -149,6 +164,28 @@ "256k(env),256k(env_redundant),256k(spare)," \ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#elif CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env + linux in mmc */ +#define FAT_ENV_INTERFACE "mmc" +/* + * We don't specify the part number, if device 0 has partition table, it means + * the first partition; it no partition table, then take whole device as a + * FAT file system. + */ +#define FAT_ENV_DEVICE_AND_PART "0" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "mtdparts=atmel_nand:" \ + "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ + "root=/dev/mmcblk0p2 rw rootwait" +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ + "fatload mmc 0:1 0x72000000 zImage; " \ + "bootz 0x72000000 - 0x71000000" +#endif #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e23549d444..9b0e588c6b 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -18,9 +18,6 @@ #define CONFIG_SYS_TEXT_BASE 0x26f00000 -#define CONFIG_ARM926EJS -#define CONFIG_AT91FAMILY - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index f0a6757ff6..b1d4baaff9 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ #define CONFIG_AT91SAM9X5EK -#define CONFIG_AT91FAMILY #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -30,6 +29,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 066d09ab0a..7b4f9cf206 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -151,6 +151,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE #define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index e93b855f8f..bf09939c81 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -14,6 +14,7 @@ #define CONFIG_ARMV7 #define CONFIG_KONA #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_GENERIC_BOARD /* * Memory configuration diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 9ff089e67c..ae83112798 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -76,6 +76,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -87,6 +88,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 7adc8c0fd7..5a37536b0a 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -12,6 +12,8 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON @@ -94,7 +96,7 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX - +#define CONFIG_CMD_I2C /* GPIO */ #define CONFIG_OMAP_GPIO #define CONFIG_CMD_GPIO diff --git a/include/configs/calimain.h b/include/configs/calimain.h index febee45b3b..b27f973896 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 OMICRON electronics GmbH + * Copyright (C) 2011-2014 OMICRON electronics GmbH * * Based on da850evm.h. Original Copyrights follow: * @@ -18,6 +18,7 @@ #define CONFIG_DRIVER_TI_EMAC #define MACH_TYPE_CALIMAIN 3528 #define CONFIG_MACH_TYPE MACH_TYPE_CALIMAIN +#define CONFIG_SYS_GENERIC_BOARD /* * SoC Configuration diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 26b615b8c5..4d1dd28a91 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -141,7 +141,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 #define CONFIG_CMD_NAND -#define GPMC_NAND_ECC_LP_x8_LAYOUT #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \ "1m(u-boot),1m(u-boot-env)," \ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index aae05e0333..5c484ef078 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -104,8 +104,6 @@ #define CONFIG_USB_DEVICE #define CONFIG_USB_TTY #define CONFIG_SYS_CONSOLE_IS_IN_ENV -/* This delay is really for slow-to-power-on USB sticks, not the hub */ -#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 500 /* commands to include */ #include <config_cmd_default.h> @@ -158,7 +156,6 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define GPMC_NAND_ECC_LP_x8_LAYOUT /* Environment information */ #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 868813f29b..ec3145f430 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -199,9 +199,10 @@ #define CONFIG_SYS_FSL_I2C2_SPEED 400000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -/* Probing DP501 I2C-Bridge will hang */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x30}, {0, 0x37}, {0, 0x3a}, \ - {0, 0x3b}, {0, 0x50} } + +#ifndef CONFIG_TRAILBLAZER +#define CONFIG_CMD_I2C +#endif #define CONFIG_PCA9698 /* NXP PCA9698 */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 959e188d9a..6171060e9c 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -27,15 +27,12 @@ #define CONFIG_SYS_TEXT_BASE 0x73f00000 -#define CONFIG_AT91_LEGACY #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 39f7062388..1feaefd14e 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -32,7 +32,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 8a3c453347..b1b18ad041 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -78,6 +78,8 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_SYS_NO_FLASH #ifdef CONFIG_SYS_USE_NAND #define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_MASK_CLE 0x80000 +#define CONFIG_SYS_NAND_MASK_ALE 0x40000 #define CONFIG_SYS_NAND_CS 2 #undef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/debris.h b/include/configs/debris.h deleted file mode 100644 index 4631b8621a..0000000000 --- a/include/configs/debris.h +++ /dev/null @@ -1,443 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Sangmoon Kim, Etin Systems, dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* Environments */ - -/* bootargs */ -#define CONFIG_BOOTARGS \ - "console=ttyS0,9600 init=/linuxrc " \ - "root=/dev/nfs rw nfsroot=192.168.0.1:" \ - "/tftpboot/target " \ - "ip=192.168.0.2:192.168.0.1:192.168.0.1:" \ - "255.255.255.0:debris:eth0:none " \ - "mtdparts=phys:12m(root),-(kernel)" - -/* bootcmd */ -#define CONFIG_BOOTCOMMAND \ - "tftp 800000 pImage; " \ - "setenv bootargs console=ttyS0,9600 init=/linuxrc " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:eth0:none " \ - "mtdparts=phys:12m(root),-(kernel); " \ - "bootm 800000" - -/* bootdelay */ -#define CONFIG_BOOTDELAY 5 /* autoboot 5s */ - -/* baudrate */ -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ - -/* loads_echo */ -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ - -/* ethaddr */ -#undef CONFIG_ETHADDR - -/* eth2addr */ -#undef CONFIG_ETH2ADDR - -/* eth3addr */ -#undef CONFIG_ETH3ADDR - -/* ipaddr */ -#define CONFIG_IPADDR 192.168.0.2 - -/* serverip */ -#define CONFIG_SERVERIP 192.168.0.1 - -/* autoload */ -#undef CONFIG_SYS_AUTOLOAD - -/* rootpath */ -#define CONFIG_ROOTPATH "/tftpboot/target" - -/* gatewayip */ -#define CONFIG_GATEWAYIP 192.168.0.1 - -/* netmask */ -#define CONFIG_NETMASK 255.255.255.0 - -/* hostname */ -#define CONFIG_HOSTNAME debris - -/* bootfile */ -#define CONFIG_BOOTFILE "pImage" - -/* loadaddr */ -#define CONFIG_LOADADDR 800000 - -/* preboot */ -#undef CONFIG_PREBOOT - -/* clocks_in_mhz */ -#undef CONFIG_CLOCKS_IN_MHZ - - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_DEBRIS 1 - -#if 0 -#define USE_DINK32 1 -#else -#undef USE_DINK32 -#endif - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_DRAM_SPEED 100 /* MHz */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_KGDB -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_EEPRO100_SROM_WRITE - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined (USE_DINK32) -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE 0x00090000 -#define CONFIG_SYS_RAMBOOT 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#endif - -#define CONFIG_SYS_FLASH_BASE 0x7C000000 -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) /* debris has tiny eeprom */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */ -#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000 -#define FLASH_BASE0_PRELIM 0x7C000000 /* debris flash */ - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ - -/* Use first bank for JFFS2, second bank contains U-Boot. - * - * Note: fake mtd_id's used, no linux mtd map file. - */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=debris-0" -#define MTDPARTS_DEFAULT "mtdparts=debris-0:-(jffs2)" -*/ - -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1 -#define CONFIG_ENV_ADDR 0xFF000000 /* right at the start of NVRAM */ -#define CONFIG_ENV_SIZE 0x400 /* Size of the Environment - 8K */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xff000000 - -/* - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS = - * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET - */ -#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 - -/* - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#ifdef CONFIG_SYS_I2C_SOFT -#error "Soft I2C is not configured properly. Please review!" -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM } - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK 7372800 - -#define CONFIG_SYS_NS16550_COM1 0xFF080000 -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_NS16550_COM1 + 8) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_NS16550_COM1 + 16) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_NS16550_COM1 + 24) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3 - -#define CONFIG_SYS_DLL_EXTEND 0x00 -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 - -#define CONFIG_SYS_ROMNAL 15 /* rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 31 /* rom/flash access time */ - -#define CONFIG_SYS_REFINT 430 /* # of clocks between CBR refresh cycles */ - -#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */ - -/* the following are for SDRAM only*/ -#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#if 0 -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */ -#endif - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - - -/* memory bank settings*/ -/* - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (0x4000000 - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x04000000 -#define CONFIG_SYS_BANK1_END (0x8000000 - 1) -#define CONFIG_SYS_BANK1_ENABLE 1 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 -/* - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0x75 /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#if defined(USE_DINK32) -#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 ) -#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K ) -#else -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#endif - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ - -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#define CONFIG_DISK_SPINUP_TIME 1000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 16a00ebe86..5308790fe6 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -314,6 +314,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/dig297.h b/include/configs/dig297.h index af6f56bb34..ce205e9b3e 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -138,6 +138,7 @@ * Board NAND Info. */ #define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 78778970f4..6153a40e06 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -17,7 +17,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.05" +#define CONFIG_IDENT_STRING " dlvision-10g 0.06" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -40,6 +40,7 @@ /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ @@ -64,9 +65,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) @@ -97,9 +103,23 @@ /* * I2C stuff */ +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F + +#define CONFIG_SYS_I2C_IHS +#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F + +#define CONFIG_SYS_SPD_BUS_NUM 2 /* Temp sensor/hwmon/dtt */ +#define CONFIG_SYS_DTT_BUS_NUM 2 #define CONFIG_DTT_LM63 1 /* National LM63 */ #define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */ #define CONFIG_DTT_PWM_LOOKUPTABLE \ @@ -107,6 +127,9 @@ { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } #define CONFIG_DTT_TACH_LIMIT 0xa10 +#define CONFIG_SYS_ICS8N3QV01_I2C {0, 1} +#define CONFIG_SYS_SIL1178_I2C {0, 1} + /* EBC peripherals */ #define CONFIG_SYS_FLASH_BASE 0xFC000000 @@ -306,9 +329,7 @@ /* * OSD Setup */ -#define CONFIG_SYS_ICS8N3QV01 #define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_SIL1178 #define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT #endif /* __CONFIG_H */ diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h new file mode 100644 index 0000000000..37bdcc0f33 --- /dev/null +++ b/include/configs/edb93xx.h @@ -0,0 +1,292 @@ +/* + * U-boot - Configuration file for Cirrus Logic EDB93xx boards + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_MK_edb9301 +#define CONFIG_EDB9301 +#elif defined(CONFIG_MK_edb9302) +#define CONFIG_EDB9302 +#elif defined(CONFIG_MK_edb9302a) +#define CONFIG_EDB9302A +#elif defined(CONFIG_MK_edb9307) +#define CONFIG_EDB9307 +#elif defined(CONFIG_MK_edb9307a) +#define CONFIG_EDB9307A +#elif defined(CONFIG_MK_edb9312) +#define CONFIG_EDB9312 +#elif defined(CONFIG_MK_edb9315) +#define CONFIG_EDB9315 +#elif defined(CONFIG_MK_edb9315a) +#define CONFIG_EDB9315A +#else +#error "no board defined" +#endif + +/* Initial environment and monitor configuration options. */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" +#define CONFIG_BOOTFILE "edb93xx.img" + +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + + +#define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" + + +#ifdef CONFIG_EDB9301 +#define CONFIG_EP9301 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 +#define CONFIG_SYS_PROMPT "EDB9301> " +#define CONFIG_ENV_SECT_SIZE 0x00020000 +#elif defined(CONFIG_EDB9302) +#define CONFIG_EP9302 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 +#define CONFIG_SYS_PROMPT "EDB9302> " +#define CONFIG_ENV_SECT_SIZE 0x00020000 +#elif defined(CONFIG_EDB9302A) +#define CONFIG_EP9302 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A +#define CONFIG_SYS_PROMPT "EDB9302A> " +#define CONFIG_ENV_SECT_SIZE 0x00020000 +#elif defined(CONFIG_EDB9307) +#define CONFIG_EP9307 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 +#define CONFIG_SYS_PROMPT "EDB9307> " +#define CONFIG_ENV_SECT_SIZE 0x00040000 +#elif defined(CONFIG_EDB9307A) +#define CONFIG_EP9307 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A +#define CONFIG_SYS_PROMPT "EDB9307A> " +#define CONFIG_ENV_SECT_SIZE 0x00020000 +#elif defined(CONFIG_EDB9312) +#define CONFIG_EP9312 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 +#define CONFIG_SYS_PROMPT "EDB9312> " +#define CONFIG_ENV_SECT_SIZE 0x00040000 +#elif defined(CONFIG_EDB9315) +#define CONFIG_EP9315 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 +#define CONFIG_SYS_PROMPT "EDB9315> " +#define CONFIG_ENV_SECT_SIZE 0x00040000 +#elif defined(CONFIG_EDB9315A) +#define CONFIG_EP9315 +#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A +#define CONFIG_SYS_PROMPT "EDB9315A> " +#define CONFIG_ENV_SECT_SIZE 0x00020000 +#else +#error "no board defined" +#endif + +/* High-level configuration options */ +#define CONFIG_ARM920T 1 /* This is an ARM920T core... */ +#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */ + +#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ +#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */ +#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ + +/* Monitor configuration */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#undef CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_JFFS2 + +#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +/* Print buffer size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +/* Boot argument buffer size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ + +/* Serial port hardware configuration */ +#define CONFIG_PL010_SERIAL +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \ + 115200, 230400} +#define CONFIG_SYS_SERIAL0 0x808C0000 +#define CONFIG_SYS_SERIAL1 0x808D0000 +/*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ + (void *)CONFIG_SYS_SERIAL1} */ + +#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} + +/* Status LED */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_GREEN 0 +#define STATUS_LED_RED 1 +/* Green */ +#define STATUS_LED_BIT STATUS_LED_GREEN +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +/* Red */ +#define STATUS_LED_BIT1 STATUS_LED_RED +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* Optional value */ +#define STATUS_LED_BOOT STATUS_LED_BIT + +/* Network hardware configuration */ +#define CONFIG_DRIVER_EP93XX_MAC +#define CONFIG_MII_SUPPRESS_PREAMBLE +#define CONFIG_MII +#define CONFIG_PHY_ADDR 1 +#define CONFIG_NET_MULTI +#undef CONFIG_NETCONSOLE + +/* SDRAM configuration */ +#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ + defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \ + defined(CONFIG_EDB9315) +/* + * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 + * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set + * the SROMLL bit on the processor, resulting in this non-contiguous memory map. + * + * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of + * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of + * 64 MB of SDRAM. + */ + +#define CONFIG_EDB93XX_SDCS3 + +#elif defined(CONFIG_EDB9302A) || \ + defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A) +/* + * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 + * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set + * the SROMLL bit on the processor, resulting in this non-contiguous memory map. + * + * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung + * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM. + */ +#define CONFIG_EDB93XX_SDCS0 + +#else +#error "no SDCS configuration for this board" +#endif + + +#if defined(CONFIG_EDB93XX_SDCS3) +#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */ +#define PHYS_SDRAM_1 0x00000000 +#elif defined(CONFIG_EDB93XX_SDCS0) +#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */ +#define PHYS_SDRAM_1 0xc0000000 +#endif + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_NR_DRAM_BANKS 8 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE) + + +/* Must match kernel config */ +#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) + +/* Run-time memory allocatons */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_STACKSIZE (128 * 1024) + +#if defined(CONFIG_USE_IRQ) +#define CONFIG_STACKSIZE_IRQ (4 * 1024) +#define CONFIG_STACKSIZE_FIQ (4 * 1024) +#endif + +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) + +/* ----------------------------------------------------------------------------- + * FLASH and environment organization + * + * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at + * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit + * data bus, for a total of 16 MB of CFI-compatible flash. + * + * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at + * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit + * data bus, for a total of 32 MB of CFI-compatible flash. + * + * + * EDB9301/02(a)7a/15a EDB9307/12/15 + * 0x60000000 - 0x0003FFFF u-boot u-boot + * 0x60040000 - 0x0005FFFF environment #1 environment #1 + * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued) + * 0x60080000 - 0x0009FFFF unused environment #2 + * 0x600A0000 - 0x000BFFFF unused environment #2 (continued) + * 0x600C0000 - 0x00FFFFFF unused unused + * 0x61000000 - 0x01FFFFFF not present unused + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + + +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT (256+8) + +#define CONFIG_SYS_TEXT_BASE 0x60000000 +#define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) + +#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */ +#define CONFIG_ENV_IS_IN_FLASH + +#define CONFIG_ENV_ADDR 0x60040000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) + +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* Define to enable MMC on SPI support */ +/* #define CONFIG_EP93XX_SPI_MMC */ + +#ifdef CONFIG_EP93XX_SPI_MMC +#define CONFIG_EP93XX_SPI +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI +#define CONFIG_CMD_MMC +#define CONFIG_MMC_SPI_NPOWER_EGPIO 9 +#endif + +#define CONFIG_USB_STORAGE +#define CONFIG_USB_OHCI_NEW +#define CONFIG_USB_OHCI_EP93XX +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci" +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000 + +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_CMD_BOOTZ + +/* Define to disable flash configuration*/ +/* #define CONFIG_EP93XX_NO_FLASH_CFG */ + +/* Define this for indusrial rated chips */ +/* #define CONFIG_EDB93XX_INDUSTRIAL */ + +#endif /* !defined (__CONFIG_H) */ diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h deleted file mode 100644 index f1af96ddbb..0000000000 --- a/include/configs/ep8248.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * Copyright (C) 2004 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * - * U-Boot configuration for Embedded Planet EP8248 boards. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC8248 -#define CPU_ID_STR "MPC8248" - -#define CONFIG_EP8248 /* Embedded Planet EP8248 board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ - -#define CONFIG_SYS_BCSR 0xFA000000 - -/* Pass open firmware flat device tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc/cpm/serial <at> 11a80" - -/* Select ethernet configuration */ -#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ -#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ - -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) - -#define CONFIG_HAS_ETH0 -#define CONFIG_ETHER_ON_FCC1 1 -/* - Rx clock is CLK10 - * - Tx clock is CLK11 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11) - -#define CONFIG_HAS_ETH1 -#define CONFIG_ETHER_ON_FCC2 1 -/* - Rx clock is CLK13 - * - Tx clock is CLK14 - * - BDs/buffers on 60x bus - * - Full duplex - */ -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ -/* - * GPIO pins used for bit-banged MII communications - */ -#define MDIO_PORT 0 /* Not used - implemented in BCSR */ - -#define MDIO_ACTIVE (*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB) -#define MDIO_TRISTATE (*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04) -#define MDIO_READ (*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1) - -#define MDIO(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \ - else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE - -#define MDC(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \ - else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD - -#define MIIDELAY udelay(1) - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 66000000 /* in Hz */ -#endif - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro" - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -#endif - -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_FLASH_BASE 0xFF800000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#if defined(CONFIG_CMD_JFFS2) -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 -#define CONFIG_SYS_JFFS2_LAST_SECTOR 62 -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS -#define CONFIG_SYS_JFFS_CUSTOM_PART -#endif - -#if defined(CONFIG_CMD_I2C) -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ -#endif - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */ - -#define CONFIG_ENV_IS_IN_FLASH - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -#define CONFIG_SYS_DEFAULT_IMMR 0x00010000 - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER 0x0C40025A /* Not used - provided by FPGA */ -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x01240200 -#define CONFIG_SYS_SYPCR 0xFFFF0683 -#define CONFIG_SYS_BCR 0x00000000 -#define CONFIG_SYS_SCCR SCCR_DFBRG01 - -#define CONFIG_SYS_RMR RMR_CSRE -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CONFIG_SYS_RCCR 0 - -#define CONFIG_SYS_MPTPR 0x1300 -#define CONFIG_SYS_PSDMR 0x82672522 -#define CONFIG_SYS_PSRT 0x4B - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00001841) -#define CONFIG_SYS_SDRAM_OR 0xFF0030C0 - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801) -#define CONFIG_SYS_OR0_PRELIM 0xFF8008C2 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_BCSR | 0x00000801) -#define CONFIG_SYS_OR2_PRELIM 0xFFF00864 - -#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 480d8678c6..4c69af6af3 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -12,6 +12,8 @@ #include <asm/hardware.h> +#define CONFIG_SYS_GENERIC_BOARD + /* The first stage boot loader expects u-boot running at this address. */ #define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ @@ -23,8 +25,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 /* CPU information */ -#define CONFIG_ARM926EJS -#define CONFIG_AT91FAMILY #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index cbd2d204cf..44e6ab4ef3 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -20,6 +20,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_BOARD_COMMON +#define CONFIG_SYS_GENERIC_BOARD /* Enable fdt support */ #define CONFIG_OF_CONTROL @@ -44,6 +45,9 @@ #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI #define CONFIG_MMC_SDMA +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MMC_DEFAULT_DEV 0 /* PWM */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index 5a9b1b42d3..e36a0313c1 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -144,8 +144,6 @@ /* specific .lds file */ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" -#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) - /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -163,8 +161,6 @@ #define CONFIG_RD_LVL -#define CONFIG_NR_DRAM_BANKS 8 -#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) @@ -207,7 +203,10 @@ #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) -#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) + +/* Store environment at the end of a 4 MB SPI flash */ +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) /* U-boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) @@ -259,6 +258,7 @@ /* PMIC */ #define CONFIG_POWER #define CONFIG_POWER_I2C +#define CONFIG_POWER_TPS65090 /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET @@ -290,4 +290,10 @@ #define CONFIG_CMD_GPIO +/* USB boot mode */ +#define CONFIG_USB_BOOTING +#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 +#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 +#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 + #endif /* __CONFIG_H */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index b7ff47236b..74e72a5dc1 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -20,6 +20,8 @@ #define MACH_TYPE_SMDK5250 3774 #define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250 +#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + /* USB */ #define CONFIG_CMD_USB #define CONFIG_USB_XHCI @@ -27,12 +29,6 @@ #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE -/* USB boot mode */ -#define CONFIG_USB_BOOTING -#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 -#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 -#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 - #define CONFIG_SPL_TEXT_BASE 0x02023400 #define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" @@ -45,7 +41,7 @@ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK /* PMIC */ -#define CONFIG_PMIC_MAX77686 +#define CONFIG_POWER_MAX77686 /* Sound */ #define CONFIG_CMD_SOUND @@ -69,4 +65,9 @@ #define LCD_YRES 1600 #define LCD_BPP LCD_COLOR16 #endif + +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 8 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + #endif /* __CONFIG_5250_H */ diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420.h new file mode 100644 index 0000000000..d2a95567a8 --- /dev/null +++ b/include/configs/exynos5420.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * + * Configuration settings for the SAMSUNG EXYNOS5420 SoC + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_EXYNOS5420_H +#define __CONFIG_EXYNOS5420_H + +#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */ + +#define MACH_TYPE_SMDK5420 8002 +#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420 + +#define CONFIG_VAR_SIZE_SPL + +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_TEXT_BASE 0x23E00000 +#ifdef CONFIG_VAR_SIZE_SPL +#define CONFIG_SPL_TEXT_BASE 0x02024410 +#else +#define CONFIG_SPL_TEXT_BASE 0x02024400 +#endif +#define CONFIG_IRAM_TOP 0x02074000 + +#define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024) + +#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420" + +#define CONFIG_MAX_I2C_NUM 11 + +/* Enable FIT support and comparison */ +#define CONFIG_FIT +#define CONFIG_FIT_BEST_MATCH + +#define CONFIG_BOARD_REV_GPIO_COUNT 2 + +#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000" + +/* + * Put the initial stack pointer 1KB below this to allow room for the + * SPL marker. This value is arbitrary, but gd_t is placed starting here. + */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) + +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + +#endif /* __CONFIG_EXYNOS5420_H */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index fb939132f9..8197a72674 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -203,7 +203,6 @@ #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP -#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200 /* Framebuffer and LCD */ #define CONFIG_VIDEO diff --git a/include/configs/h2200.h b/include/configs/h2200.h index d02648420f..5d0b85e431 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -12,6 +12,7 @@ #define MACH_TYPE_H2200 341 #define CONFIG_MACH_TYPE MACH_TYPE_H2200 +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_CPU_PXA25X 1 #define CONFIG_BOARD_H2200 diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index c1b3b633e9..3e55247465 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -19,6 +19,8 @@ #define CONFIG_MPC8313 #define CONFIG_IDS8313 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_FSL_ELBC #define CONFIG_MISC_INIT_R @@ -576,11 +578,11 @@ #define CONFIG_FIT #define CONFIG_FIT_SIGNATURE +#define CONFIG_IMAGE_FORMAT_LEGACY #define CONFIG_CMD_FDT #define CONFIG_CMD_HASH #define CONFIG_RSA #define CONFIG_SHA1 #define CONFIG_SHA256 -#define CONFIG_OF_CONTROL #endif /* __CONFIG_H */ diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 267a92b2d0..eac517aeeb 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -26,6 +26,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_OF_LIBFDT /* enable passing a Device Tree */ #define CONFIG_MISC_INIT_R /* call misc_init_r during start up */ +#define CONFIG_SYS_GENERIC_BOARD /* * There are various dependencies on the core module (CM) fitted diff --git a/include/configs/io.h b/include/configs/io.h index 9da6cc6855..8e32c25803 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -40,6 +40,7 @@ /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ @@ -64,9 +65,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 79c4736bc5..ae05bcbfbf 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -17,7 +17,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME iocon -#define CONFIG_IDENT_STRING " iocon 0.05" +#define CONFIG_IDENT_STRING " iocon 0.06" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -39,6 +39,7 @@ /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ @@ -62,9 +63,12 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CACHE -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_FPGA_LOADMK +#define CONFIG_CMD_FPGAD #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) @@ -100,12 +104,27 @@ #define CONFIG_SYS_I2C_PPC4XX_CH0 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS #define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_SPD_BUS_NUM 4 #define CONFIG_PCA953X /* NXP PCA9554 */ #define CONFIG_PCA9698 /* NXP PCA9698 */ +#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2 +#define CONFIG_SYS_I2C_IHS_SPEED_2 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F +#define CONFIG_SYS_I2C_IHS_CH3 +#define CONFIG_SYS_I2C_IHS_SPEED_3 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F + /* * Software (bit-bang) I2C driver configuration */ @@ -122,7 +141,9 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F -#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} +#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} +#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8} +#define CONFIG_SYS_DP501_I2C {0, 1, 2, 3} #ifndef __ASSEMBLY__ void fpga_gpio_set(unsigned int bus, int pin); @@ -151,12 +172,6 @@ int fpga_gpio_get(unsigned int bus, int pin); #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ /* - * OSD hardware - */ -#define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_CH7301 - -/* * FLASH organization */ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ @@ -284,8 +299,9 @@ int fpga_gpio_get(unsigned int bus, int pin); * OSD Setup */ #define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_CH7301 #define CONFIG_SYS_OSD_SCREENS 1 +#define CONFIG_SYS_DP501_DIFFERENTIAL +#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ #define CONFIG_BITBANGMII_MULTI diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 6255750c3b..0b9e5b699f 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -63,6 +63,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -74,6 +75,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index dde73298fc..858329f958 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -71,7 +71,8 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE +#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE #define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6) #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 @@ -128,12 +129,19 @@ #define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 #define CONFIG_SYS_SGMII_RATESCALE 2 +/* AEMIF */ +#define CONFIG_TI_AEMIF +#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE + /* NAND Configuration */ #define CONFIG_NAND_DAVINCI +#define CONFIG_CMD_NAND_ECCLAYOUT #define CONFIG_SYS_NAND_CS 2 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_MASK_CLE 0x4000 +#define CONFIG_SYS_NAND_MASK_ALE 0x2000 #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h deleted file mode 100644 index c352a1c804..0000000000 --- a/include/configs/kvme080.h +++ /dev/null @@ -1,251 +0,0 @@ -/* - * (C) Copyright 2005 - * Sangmoon Kim, dogoil@etinsys.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC8245 1 -#define CONFIG_KVME080 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_IPADDR 192.168.0.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.0.1 - -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 " \ - "root=/dev/nfs rw nfsroot=192.168.0.1:/opt/eldk/ppc_82xx " \ - "ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:" \ - "kvme080:eth0:none " \ - "mtdparts=phys_mapped_flash:12m(root),-(kernel)" - -#define CONFIG_BOOTCOMMAND \ - "tftp 800000 kvme080/uImage; " \ - "bootm 800000" - -#define CONFIG_LOADADDR 800000 - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_EARLY_INIT_R -#define CONFIG_MISC_INIT_R - -#define CONFIG_LOADS_ECHO 1 -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#undef CONFIG_WATCHDOG - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_RTC_DS164x - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_NETCONSOLE - -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00400000 -#define CONFIG_SYS_MEMTEST_END 0x07C00000 - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x7C000000 -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFF000000 -#define CONFIG_SYS_NS16550_COM1 0xFF080000 -#define CONFIG_SYS_NS16550_COM2 0xFF080010 -#define CONFIG_SYS_NS16550_COM3 0xFF080020 -#define CONFIG_SYS_NS16550_COM4 0xFF080030 -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 -#define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) -#define CONFIG_SYS_NVRAM_SIZE 0x7FFF8 - -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MALLOC_LEN (512 << 10) - -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_PROTECT_CLEAR - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE -#define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR -#define CONFIG_ENV_SIZE 0x400 -#define CONFIG_ENV_OFFSET 0 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 14745600 - -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_PNP - -#define CONFIG_EEPRO100 -#define CONFIG_EEPRO100_SROM_WRITE - -#define CONFIG_SYS_RX_ETH_BUFFER 8 - -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_CLK_FREQ 33333333 - -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -#define CONFIG_SYS_DLL_EXTEND 0x00 -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 - -#define CONFIG_SYS_ROMNAL 15 -#define CONFIG_SYS_ROMFAL 31 - -#define CONFIG_SYS_REFINT 430 - -#define CONFIG_SYS_DBUS_SIZE2 1 - -#define CONFIG_SYS_BSTOPRE 121 -#define CONFIG_SYS_REFREC 8 -#define CONFIG_SYS_RDLAT 4 -#define CONFIG_SYS_PRETOACT 3 -#define CONFIG_SYS_ACTTOPRE 5 -#define CONFIG_SYS_ACTORW 3 -#define CONFIG_SYS_SDMODE_CAS_LAT 3 -#define CONFIG_SYS_SDMODE_WRAP 0 - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (0x4000000 - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x04000000 -#define CONFIG_SYS_BANK1_END (0x8000000 - 1) -#define CONFIG_SYS_BANK1_ENABLE 1 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_BANK_ENABLE 0x03 - -#define CONFIG_SYS_ODCR 0x75 -#define CONFIG_SYS_PGMAX 0x32 - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -#endif /* __CONFIG_H */ diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h new file mode 100644 index 0000000000..2bd5a472b3 --- /dev/null +++ b/include/configs/ls2085a_common.h @@ -0,0 +1,226 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS2_COMMON_H +#define __LS2_COMMON_H + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_REMAKE_ELF +#define CONFIG_FSL_LSCH3 +#define CONFIG_LS2085A +#define CONFIG_GICV3 + +/* Link Definitions */ +#define CONFIG_SYS_TEXT_BASE 0x30000000 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SUPPORT_RAW_INITRD + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F 1 + +#define CONFIG_IDENT_STRING " LS2085A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#ifndef CONFIG_SYS_FSL_DDR4 +#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ +#define CONFIG_SYS_DDR_RAW_TIMING +#endif +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +#define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ + +/* SMP Definitions */ +#define CPU_RELEASE_ADDR CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 12000000 /* 12MHz */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/* I2C */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_MXC_I2C1_SPEED 40000000 +#define CONFIG_SYS_MXC_I2C2_SPEED 40000000 + +/* Serial Port */ +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* IFC */ +#define CONFIG_FSL_IFC +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* + * During booting, CS0 needs to be at the region of 0x30000000, i.e. the IFC + * address 0. But this region is limited to 256MB. To accommodate bigger NOR + * flash and other devices, we will map CS0 to 0x580000000 after relocation. + * CONFIG_SYS_FLASH_BASE has the final address (core view) + * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting + */ +#define CONFIG_SYS_FLASH_BASE 0x580000000ULL +#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 +#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 + +/* + * NOR Flash Timing Params + */ +#define CONFIG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x1) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x1)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \ + FTIM2_NOR_TCH(0x0) | \ + FTIM2_NOR_TWP(0x1)) +#define CONFIG_SYS_NOR_FTIM3 0x04000000 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY +#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + +/* MC firmware */ +#define CONFIG_FSL_MC_ENET +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_FW_IN_NOR +#define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL +/* TODO Actual FW length needs to be determined at runtime from FW header */ +#define CONFIG_SYS_LS_MC_FW_LENGTH (4U * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DPL_IN_NOR +#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL +/* TODO Actual DPL max length needs to be confirmed with the MC FW team */ +#define CONFIG_SYS_LS_MC_DPL_LENGTH 4096 +#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000 + +/* Carve the MC private DRAM block from the end of DRAM */ +#ifdef CONFIG_FSL_MC_ENET +#define CONFIG_SYS_MEM_TOP_HIDE mc_get_dram_block_size() +#endif + +/* Command line configuration */ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) + +/* Physical Memory Map */ +/* fixme: these need to be checked against the board */ +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_SYS_CLK_FREQ 133333333 + + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_DISPLAY_CPUINFO + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x581200000\0" \ + "kernel_load=0x806f0000\0" \ + "kernel_size=0x1000000\0" \ + "console=ttyAMA0,38400n8\0" + +#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ + "earlyprintk=uart8250-8bit,0x21c0600" +#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ + "$kernel_size && bootm $kernel_load" +#define CONFIG_BOOTDELAY 1 + +/* Store environment at top of flash */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x1000 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PROMPT "> " +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#ifndef __ASSEMBLY__ +unsigned long mc_get_dram_block_size(void); +#endif + +#endif /* __LS2_COMMON_H */ diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h new file mode 100644 index 0000000000..a5cea63b33 --- /dev/null +++ b/include/configs/ls2085a_emu.h @@ -0,0 +1,19 @@ +/* + * Copyright 2014 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS2_EMU_H +#define __LS2_EMU_H + +#include "ls2085a_common.h" + +#define CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 +#define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ + +#endif /* __LS2_EMU_H */ diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h new file mode 100644 index 0000000000..46d47b06e4 --- /dev/null +++ b/include/configs/ls2085a_simu.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS2_SIMU_H +#define __LS2_SIMU_H + +#include "ls2085a_common.h" + +/* SMSC 91C111 ethernet configuration */ +#define CONFIG_SMC91111 +#define CONFIG_SMC91111_BASE (0x2210000) + +#endif /* __LS2_SIMU_H */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index aff2419f85..d464ad964b 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -107,7 +107,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC34704 +#define CONFIG_POWER_FSL_MC34704 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54 #define CONFIG_DOS_PARTITION diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 0a46f4c305..ab481441b2 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -52,7 +52,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 #define CONFIG_RTC_MC13XXX diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 5bbae8cf7d..fb2072d2f0 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -47,7 +47,7 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_RTC_MC13XXX /* MMC Configs */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 12d79b4559..a74508c5e8 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -82,7 +82,7 @@ #define CONFIG_POWER_I2C #define CONFIG_DIALOG_POWER #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 diff --git a/include/configs/neo.h b/include/configs/neo.h index d549985886..4937730ee3 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -37,6 +37,7 @@ /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ @@ -61,10 +62,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE #define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 0a7df60f28..3782049ee6 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -111,6 +111,7 @@ #define CONFIG_CMD_LED /* LED support */ #define CONFIG_CMD_SETEXPR /* Evaluate expressions */ #define CONFIG_CMD_GPIO /* Enable gpio command */ +#define CONFIG_CMD_DHCP #define CONFIG_VIDEO_OMAP3 /* DSS Support */ @@ -295,6 +296,7 @@ #define CONFIG_SPL_OMAP3_ID_NAND /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 7f3424b4f0..ae4ce63f67 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -120,7 +120,7 @@ /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 - +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 /* Timeout values (in ticks) */ #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index d56d5b00cc..79daabd6bb 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -187,6 +187,7 @@ /* NAND boot config */ #ifdef CONFIG_NAND +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 0d03c75ce3..8dcbba3c40 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -141,6 +141,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 7b97be9ace..f7483a0827 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -83,7 +83,6 @@ /* Environment information */ #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ - "fdtfile=overo.dtb\0" \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ "usbtty=cdc_acm\0" \ @@ -152,10 +151,11 @@ "run mmcboot;" \ "fi;" \ "if run loadzimage; then " \ - "if test -n $fdtfile; then " \ - "if run loadfdt; then " \ - "run mmcbootfdt;" \ - "fi;" \ + "if test $fdtfile; then " \ + "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ + "fi;" \ + "if run loadfdt; then " \ + "run mmcbootfdt;" \ "fi;" \ "fi;" \ "fi;" \ @@ -206,6 +206,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 7c5540ff66..3efe4cf815 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -98,6 +98,7 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 /* Environment information */ diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h new file mode 100644 index 0000000000..76b8d7a6b8 --- /dev/null +++ b/include/configs/peach-pit.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * + * Configuration settings for the SAMSUNG/GOOGLE PEACH-PIT board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PEACH_PIT_H +#define __CONFIG_PEACH_PIT_H + +#include <configs/exynos5-dt.h> + +#include <configs/exynos5420.h> + +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit + +/* select serial console configuration */ +#define CONFIG_SERIAL3 /* use SERIAL 3 */ + +#define CONFIG_SYS_PROMPT "Peach # " +#define CONFIG_IDENT_STRING " for Peach" + +#endif /* __CONFIG_PEACH_PIT_H */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index fc25966e0f..85104057a9 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ "128k(SPL.backup1)," \ diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h deleted file mode 100644 index e91e805bb9..0000000000 --- a/include/configs/quad100hd.h +++ /dev/null @@ -1,281 +0,0 @@ -/* - * (C) Copyright 2008 - * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * quad100hd.h - configuration for Quad100hd board - ***********************************************************************/ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */ -#define CONFIG_405EP 1 /* Specifc 405EP support*/ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */ -#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */ - -/* the environment is in the EEPROM by default */ -#define CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_FLASH - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_HAS_ETH1 1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0x01 /* PHY address */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ -#define CONFIG_PHY_RESET 1 -#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#undef CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#undef CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#undef CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/*----------------------------------------------------------------------- - * SDRAM - *----------------------------------------------------------------------*/ -/* - * SDRAM configuration (please see cpu/ppc/sdram.[ch]) - */ -#define CONFIG_SDRAM_BANK0 1 - -/* FIX! SDRAM timings used in datasheet */ -#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ -#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ -#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ -#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ -#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ - -/* - * JFFS2 - */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#ifdef CONFIG_SYS_KERNEL_IN_JFFS2 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */ -#else /* kernel not in JFFS */ -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */ -#endif -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ -#define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */ - -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_SYS_EEPROM_SIZE 0x2000 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -/* the environment is located before u-boot */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) -#endif - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars */ -#define CONFIG_ENV_OFFSET 0x00000000 -#define CONFIG_SYS_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */ -#endif - -/* partly from PPCBoot */ -/* NAND */ -#define CONFIG_NAND -#ifdef CONFIG_NAND -#define CONFIG_SYS_NAND_BASE 0x60000000 -#define CONFIG_SYS_NAND_CS 10 /* our CS is GPIO10 */ -#define CONFIG_SYS_NAND_RDY 23 /* our RDY is GPIO23 */ -#define CONFIG_SYS_NAND_CE 24 /* our CE is GPIO24 */ -#define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */ -#define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#endif - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory (OCM) for temperary stack until sdram is tested */ -/* see ./arch/powerpc/cpu/ppc4xx/start.S */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - * Taken from PPCBoot board/icecube/icecube.h - */ - -/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */ -#define CONFIG_SYS_EBC_PB0AP 0x04002480 -/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */ -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 -#define CONFIG_SYS_EBC_PB1AP 0x04005480 -#define CONFIG_SYS_EBC_PB1CR 0x60018000 -#define CONFIG_SYS_EBC_PB2AP 0x00000000 -#define CONFIG_SYS_EBC_PB2CR 0x00000000 -#define CONFIG_SYS_EBC_PB3AP 0x00000000 -#define CONFIG_SYS_EBC_PB3CR 0x00000000 -#define CONFIG_SYS_EBC_PB4AP 0x00000000 -#define CONFIG_SYS_EBC_PB4CR 0x00000000 - -/*----------------------------------------------------------------------- - * Definitions for GPIO setup (PPC405EP specific) - * - * Taken in part from PPCBoot board/icecube/icecube.h - */ -/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */ -#define CONFIG_SYS_GPIO0_OSRL 0x55555550 -#define CONFIG_SYS_GPIO0_OSRH 0x00000110 -#define CONFIG_SYS_GPIO0_ISR1L 0x00000000 -#define CONFIG_SYS_GPIO0_ISR1H 0x15555445 -#define CONFIG_SYS_GPIO0_TSRL 0x00000000 -#define CONFIG_SYS_GPIO0_TSRH 0x00000000 -#define CONFIG_SYS_GPIO0_TCR 0xFFFF8097 -#define CONFIG_SYS_GPIO0_ODR 0x00000000 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* ENVIRONMENT VARS */ - -#define CONFIG_IPADDR 192.168.1.67 -#define CONFIG_SERVERIP 192.168.1.50 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 300000 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h deleted file mode 100644 index f3540c1421..0000000000 --- a/include/configs/quantum.h +++ /dev/null @@ -1,430 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - * changes for 16M board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#undef CONFIG_MPC860 -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_RPXLITE 1 /* QUANTUM is the RPXlite clone */ -#define CONFIG_RMU 1 /* The QUNATUM is based on our RMU */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -/* default developmenmt environment */ - -#define CONFIG_ETHADDR 00:0B:17:00:00:00 - -#define CONFIG_IPADDR 10.10.69.10 -#define CONFIG_SERVERIP 10.10.69.49 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_HOSTNAME QUANTUM -#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx" - -#define CONFIG_BOOTARGS "root=/dev/ram rw" - -#define CONFIG_BOOTCOMMAND "bootm ff000000" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "serial#=12345\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" - -/* - * Select the more full-featured memory test (Barr embedded systems) - */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - - -/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/ -#define CONFIG_RTC_M48T35A 1 - -#if 0 -#define CONFIG_WATCHDOG 1 /* watchdog enabled */ -#else -#undef CONFIG_WATCHDOG -#endif - -/* NVRAM and RTC */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000 -#define CONFIG_SYS_NVRAM_SIZE 2048 - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT \ - "\nEnter password - autoboot in %d sec...\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "system" -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 256K ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#if 1 - #define CONFIG_FLASH_CFI_DRIVER -#else - #undef CONFIG_FLASH_CFI_DRIVER -#endif - - -#ifdef CONFIG_FLASH_CFI_DRIVER - #define CONFIG_SYS_FLASH_CFI 1 - #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE - #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#endif - -/*%%% #define CONFIG_SYS_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 -/*%%% #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector absolute address 0xfff40000*/ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* FPGA */ -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_FPGA_SPARTAN2 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK - - -/*----------------------------------------------------------------------- - * Reset address - */ -#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res))) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 - -#define CONFIG_SYS_OR1_PRELIM (0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */ -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXLITE mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* FPGA */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 - -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 20 - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2 - -/* - * MAMR settings for SDRAM - */ - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X) - -/* - * BCSRx - * - * Board Status and Control Registers - * - */ - -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR2_ENPA5HDR 0x08 /* USB Control */ -#define BCSR2_ENUSBCLK 0x10 -#define BCSR2_USBPWREN 0x20 -#define BCSR2_USBSPD 0x40 -#define BCSR2_USBSUSP 0x80 - -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - -#endif /* __CONFIG_H */ diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index ed8b4dfb51..ff48598dd5 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -20,6 +20,7 @@ #include <linux/sizes.h> /* Architecture, CPU, etc.*/ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_ARM1176 #define CONFIG_BCM2835 #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 799d4fe9d8..6e795bf496 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -17,6 +17,7 @@ #define CONFIG_S5PC110 1 /* which is in a S5PC110 */ #define CONFIG_MACH_GONI 1 /* working with Goni */ +#include <linux/sizes.h> #include <asm/arch/cpu.h> /* get chip and board defs */ #define CONFIG_ARCH_CPU_INIT @@ -38,11 +39,9 @@ #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING -/* - * Size of malloc() pool - * 1MB = 0x100000, 0x100000 = 1024 * 1024 - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +/* Size of malloc() pool.*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M) + /* * select serial console configuration */ @@ -72,14 +71,27 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND -#define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC - -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_DFU +#define CONFIG_CMD_GPT + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* TIZEN THOR downloader support */ +#define CONFIG_CMD_THOR_DOWNLOAD +#define CONFIG_THOR_FUNCTION + +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D +#define CONFIG_G_DNL_MANUFACTURER "Samsung" /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define MTDIDS_DEFAULT "onenand0=samsung-onenand" @@ -90,30 +102,52 @@ ",7m(kernel)"\ ",1m(log)"\ ",12m(modem)"\ - ",60m(qboot)"\ - ",-(UBI)\0" + ",60m(qboot)\0" -#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTCOMMAND "run ubifsboot" +/* partitions definitions */ +#define PARTS_CSA "csa-mmc" +#define PARTS_BOOTLOADER "u-boot" +#define PARTS_BOOT "boot" +#define PARTS_ROOT "platform" +#define PARTS_DATA "data" +#define PARTS_CSC "csc" +#define PARTS_UMS "ums" + +#define CONFIG_DFU_ALT \ + "u-boot raw 0x80 0x400;" \ + "uImage ext4 0 2;" \ + "exynos3-goni.dtb ext4 0 2;" \ + ""PARTS_ROOT" part 0 5\0" + +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ + "name="PARTS_BOOTLOADER",size=60MiB," \ + "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \ + "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ + "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ + "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ + "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ + "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ + +#define CONFIG_BOOTCOMMAND "run mmcboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ " ${console} ${meminfo}" #define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" -#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ - " rootfstype=cramfs " CONFIG_COMMON_BOOT +#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \ + CONFIG_COMMON_BOOT #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ " onenand write 0x32008000 0x0 0x100000\0" -#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6" - -#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" - #define CONFIG_MISC_COMMON #define CONFIG_MISC_INIT_R @@ -130,42 +164,44 @@ "onenand erase 0x01560000 0x1eaa0000;" \ "onenand write 0x32000000 0x1260000 0x8C0000\0" \ "bootk=" \ - "onenand read 0x30007FC0 0xc00000 0x600000;" \ + "run loaduimage;" \ "bootm 0x30007FC0\0" \ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \ - "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \ + "rootfstype=${rootfstype} ${opts} " \ "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + "${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "tftpboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ - CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \ - "bootm 0x30007FC0\0" \ + "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \ + "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \ "ramboot=" \ "set bootargs " CONFIG_RAMDISK_BOOT \ - " initrd=0x33000000,8M ramdisk=8192\0" \ + "initrd=0x33000000,8M ramdisk=8192\0" \ "mmcboot=" \ - "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ - CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ + "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "verify=n\0" \ - "rootfstype=cramfs\0" \ + "rootfstype=ext4\0" \ "console=" CONFIG_DEFAULT_CONSOLE \ - "mtdparts=" MTDPARTS_DEFAULT \ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ - "mmcblk=/dev/mmcblk1p1\0" \ + "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \ + "mmcdev=0\0" \ + "mmcbootpart=2\0" \ + "mmcrootpart=5\0" \ + "partitions=" PARTS_DEFAULT \ "bootblock=9\0" \ "ubiblock=8\0" \ "ubi=enabled\0" \ - "opts=always_resume=1" + "opts=always_resume=1\0" \ + "dfu_alt_info=" CONFIG_DFU_ALT "\0" -/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "Goni # " @@ -192,9 +228,12 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ /* FLASH and environment organization */ -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */ -#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */ +#define CONFIG_MMC_DEFAULT_DEV 0 +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ +#define CONFIG_ENV_OVERWRITE #define CONFIG_USE_ONENAND_BOARD_INIT #define CONFIG_SAMSUNG_ONENAND 1 @@ -202,6 +241,18 @@ #define CONFIG_DOS_PARTITION 1 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + +/* write support for filesystems */ +#define CONFIG_FAT_WRITE +#define CONFIG_EXT4_WRITE + +/* GPT */ +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS + #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -226,5 +277,8 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE #endif /* __CONFIG_H */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 41c946d1ec..f72ab0bad0 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -18,15 +18,20 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -74,8 +79,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x10000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x310000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif /* NAND flash */ #define CONFIG_CMD_NAND @@ -199,4 +208,46 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 + +#endif + #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 516be85fe0..da2718044c 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #ifndef CONFIG_SPL_BUILD @@ -34,6 +33,8 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ +#define CONFIG_SYS_GENERIC_BOARD + /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -281,6 +282,7 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 6bb2546eda..12b69d9a24 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -16,6 +16,9 @@ #endif +#define CONFIG_IO_TRACE +#define CONFIG_CMD_IOTRACE + #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_BOOTSTAGE @@ -41,6 +44,7 @@ #define CONFIG_RSA #define CONFIG_CMD_FDT #define CONFIG_DEFAULT_DEVICE_TREE sandbox +#define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT #define CONFIG_FS_EXT4 diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 58f706a3a7..606739b02e 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -1,58 +1,27 @@ /* * Copyright (C) 2013 Samsung Electronics * - * Configuration settings for the SAMSUNG EXYNOS5420 board. + * Configuration settings for the SAMSUNG SMDK5420 board. * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_5420_H -#define __CONFIG_5420_H +#ifndef __CONFIG_SMDK5420_H +#define __CONFIG_SMDK5420_H #include <configs/exynos5-dt.h> -#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */ +#include <configs/exynos5420.h> + #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ #undef CONFIG_DEFAULT_DEVICE_TREE #define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420 -#define CONFIG_VAR_SIZE_SPL - -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_TEXT_BASE 0x23E00000 - -#define CONFIG_BOARD_REV_GPIO_COUNT 2 - -/* MACH_TYPE_SMDK5420 macro will be removed once added to mach-types */ -#define MACH_TYPE_SMDK5420 8002 /* Temporary number */ -#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420 - /* select serial console configuration */ -#define CONFIG_SERIAL3 /* use SERIAL 3 */ - -#ifdef CONFIG_VAR_SIZE_SPL -#define CONFIG_SPL_TEXT_BASE 0x02024410 -#else -#define CONFIG_SPL_TEXT_BASE 0x02024400 -#endif - -#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000" - -#define CONFIG_SYS_PROMPT "SMDK5420 # " -#define CONFIG_IDENT_STRING " for SMDK5420" - -#define CONFIG_IRAM_TOP 0x02074000 -/* - * Put the initial stack pointer 1KB below this to allow room for the - * SPL marker. This value is arbitrary, but gd_t is placed starting here. - */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) - -#define CONFIG_MAX_I2C_NUM 11 +#define CONFIG_SERIAL3 /* use SERIAL 3 */ -/* Enable FIT support and comparison */ -#define CONFIG_FIT -#define CONFIG_FIT_BEST_MATCH +#define CONFIG_SYS_PROMPT "SMDK5420 # " +#define CONFIG_IDENT_STRING " for SMDK5420" -#endif /* __CONFIG_5420_H */ +#endif /* __CONFIG_SMDK5420_H */ diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 0254249751..262e7445f6 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -8,6 +8,7 @@ #include <asm/arch/socfpga_base_addrs.h> #include "../../board/altera/socfpga/pinmux_config.h" +#include "../../board/altera/socfpga/iocsr_config.h" #include "../../board/altera/socfpga/pll_config.h" /* @@ -201,11 +202,23 @@ #else #define CONFIG_SYS_TIMER_RATE 25000000 #endif +#define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) #define CONFIG_ENV_IS_NOWHERE /* + * L4 Watchdog + */ +#define CONFIG_HW_WATCHDOG +#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 2000 +#define CONFIG_DESIGNWARE_WATCHDOG +#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS +/* Clocks source frequency to watchdog timer */ +#define CONFIG_DW_WDT_CLOCK_KHZ 25000 + + +/* * SPL "Second Program Loader" aka Initial Software */ @@ -237,4 +250,7 @@ /* Support for lib/libgeneric.o in SPL binary */ #define CONFIG_SPL_LIBGENERIC_SUPPORT +/* Support for watchdog */ +#define CONFIG_SPL_WATCHDOG_SUPPORT + #endif /* __CONFIG_H */ diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h deleted file mode 100644 index 127de000f0..0000000000 --- a/include/configs/spc1920.h +++ /dev/null @@ -1,405 +0,0 @@ -/* - * (C) Copyright 2006 - * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de - * - * Configuation settings for the SPC1920 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __H -#define __CONFIG_H - -#define CONFIG_SPC1920 1 /* SPC1920 board */ -#define CONFIG_MPC885 1 /* MPC885 CPU */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_MII -#define CONFIG_MII_INIT 1 -#undef CONFIG_ETHER_ON_FEC1 -#define CONFIG_ETHER_ON_FEC2 -#define FEC_ENET -#define CONFIG_FEC2_PHY 1 - -#define CONFIG_BAUDRATE 19200 - -/* use PLD CLK4 instead of brg */ -#define CONFIG_SYS_SPC1920_SMC1_CLK4 - -#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ -#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 -#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 -#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xC0000000 - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_LAST_STAGE_INIT - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \ - "bootm" - -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \ - "bootm fe080000" - -#undef CONFIG_BOOTARGS - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 } - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ - -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ - -/* - * Flash - */ -/*----------------------------------------------------------------------- - * Flash organisation - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ - -/* Environment is in flash */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ - -#ifdef CONFIG_CMD_DATE -# define CONFIG_RTC_DS3231 -# define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#endif - -/*----------------------------------------------------------------------- - * I2C configuration - */ -#if defined(CONFIG_CMD_I2C) -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */ -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/* - * Software (bit-bang) I2C driver configuration - */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_FRC) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* #define CONFIG_SYS_SCCR SCCR_TBS */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * DER - Debug Enable Register - *----------------------------------------------------------------------- - * Set to zero to prevent the processor from entering debug mode - */ -#define CONFIG_SYS_DER 0 - - -/* Because of the way the 860 starts up and assigns CS0 the entire - * address space, we have to set the memory controller differently. - * Normally, you write the option register first, and then enable the - * chip select by writing the base register. For CS0, you must write - * the base register first, followed by the option register. - */ - - -/* - * Init Memory Controller: - */ - -/* BR0 and OR0 (FLASH) */ -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* - * FLASH timing: - */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_6_CLK | OR_EHTR | OR_BI) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - - -/* - * SDRAM CS1 UPMB - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE_PRELIM CONFIG_SYS_SDRAM_BASE -#define SDRAM_MAX_SIZE 0x4000000 /* max 64 MB */ - -#define CONFIG_SYS_PRELIM_OR1_AM 0xF0000000 -/* #define CONFIG_SYS_OR1_TIMING OR_CSNT_SAM/\* | OR_G5LS /\\* *\\/ *\/ */ -#define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */ - -#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING) -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V) - -/* #define CONFIG_SYS_OR1_FINAL ((CONFIG_SYS_OR1_AM & OR_AM_MSK) | CONFIG_SYS_OR1_TIMING) */ -/* #define CONFIG_SYS_BR1_FINAL ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */ - -#define CONFIG_SYS_PTB_PER_CLK ((4096 * 16 * 1000) / (4 * 64)) -#define CONFIG_SYS_PTA_PER_CLK 195 -#define CONFIG_SYS_MBMR_PTB 195 -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV16 -#define CONFIG_SYS_MAR 0x88 - -#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ - MBMR_AMB_TYPE_0 | \ - MBMR_G0CLB_A10 | \ - MBMR_DSB_1_CYCL | \ - MBMR_RLFB_1X | \ - MBMR_WLFB_1X | \ - MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ - -#define CONFIG_SYS_MBMR_9COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ - MBMR_AMB_TYPE_1 | \ - MBMR_G0CLB_A10 | \ - MBMR_DSB_1_CYCL | \ - MBMR_RLFB_1X | \ - MBMR_WLFB_1X | \ - MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ - - -/* - * DSP Host Port Interface CS3 - */ -#define CONFIG_SYS_SPC1920_HPI_BASE 0x90000000 -#define CONFIG_SYS_PRELIM_OR3_AM 0xF8000000 - -#define CONFIG_SYS_OR3 (CONFIG_SYS_PRELIM_OR3_AM | \ - OR_G5LS | \ - OR_SCY_0_CLK | \ - OR_BI) - -#define CONFIG_SYS_BR3 ((CONFIG_SYS_SPC1920_HPI_BASE & BR_BA_MSK) | \ - BR_MS_UPMA | \ - BR_PS_16 | \ - BR_V) - -#define CONFIG_SYS_MAMR (MAMR_GPL_A4DIS | \ - MAMR_RLFA_5X | \ - MAMR_WLFA_5X) - -#define CONFIG_SPC1920_HPI_TEST - -#ifdef CONFIG_SPC1920_HPI_TEST -#define HPI_REG(x) (*((volatile u16 *) (CONFIG_SYS_SPC1920_HPI_BASE + x))) -#define HPI_HPIC_1 HPI_REG(0) -#define HPI_HPIC_2 HPI_REG(2) -#define HPI_HPIA_1 HPI_REG(0x2000008) -#define HPI_HPIA_2 HPI_REG(0x2000008 + 2) -#define HPI_HPID_INC_1 HPI_REG(0x1000004) -#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2) -#define HPI_HPID_NOINC_1 HPI_REG(0x300000c) -#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2) -#endif /* CONFIG_SPC1920_HPI_TEST */ - -/* - * Ramtron FM18L08 FRAM 32KB on CS4 - */ -#define CONFIG_SYS_SPC1920_FRAM_BASE 0x80100000 -#define CONFIG_SYS_PRELIM_OR4_AM 0xffff8000 -#define CONFIG_SYS_OR4 (CONFIG_SYS_PRELIM_OR4_AM | \ - OR_ACS_DIV2 | \ - OR_BI | \ - OR_SCY_4_CLK | \ - OR_TRLX) - -#define CONFIG_SYS_BR4 ((CONFIG_SYS_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) - -/* - * PLD CS5 - */ -#define CONFIG_SYS_SPC1920_PLD_BASE 0x80000000 -#define CONFIG_SYS_PRELIM_OR5_AM 0xffff8000 - -#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PRELIM_OR5_AM | \ - OR_CSNT_SAM | \ - OR_ACS_DIV1 | \ - OR_BI | \ - OR_SCY_0_CLK | \ - OR_TRLX) - -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) - -#endif /* __CONFIG_H */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 3522c1a07a..0c2f0f19c8 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -185,6 +185,7 @@ /* Configure the PISMO */ #define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ @@ -249,6 +250,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* NAND boot config */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 #define CONFIG_SYS_NAND_OOBSIZE 64 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 9c04c23ab7..1b0fee9a80 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -137,10 +137,10 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 /* Environment information */ #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/tb100.h b/include/configs/tb100.h new file mode 100644 index 0000000000..8a861a836b --- /dev/null +++ b/include/configs/tb100.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_TB100_H_ +#define _CONFIG_TB100_H_ + +#include <linux/sizes.h> + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CLK_FREQ 500000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_ARCH_EARLY_INIT_R + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x84000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE SZ_128M + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN SZ_128K +#define CONFIG_SYS_BOOTM_LEN SZ_32M +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_SYS_NO_FLASH + +/* + * UART configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 166666666 +#define CONFIG_SYS_NS16550_COM1 0xFF100000 +#define CONFIG_SYS_NS16550_MEM32 + +#define CONFIG_BAUDRATE 115200 + +/* + * Ethernet PHY configuration + */ +#define CONFIG_PHYLIB +#define CONFIG_PHY_GIGE + +/* + * Even though the board houses Realtek RTL8211E PHY + * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly. + * In particular "parse_status" reports link is down. + * + * Until Realtek PHY driver is fixed fall back to generic PHY driver + * which implements all required functionality and behaves much more stable. + * + * #define CONFIG_PHY_REALTEK + * + */ + +/* + * Ethernet configuration + */ +#define CONFIG_DESIGNWARE_ETH +#define ETH0_BASE_ADDRESS 0xFE100000 +#define ETH1_BASE_ADDRESS 0xFE110000 + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE SZ_2K +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS0,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "[tb100]:~# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#endif /* _CONFIG_TB100_H_ */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 76dad4e88c..1c770c90fe 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -101,13 +101,12 @@ \ "do_sysboot_boot=" \ "sysboot ${devtype} ${devnum}:${rootpart} any " \ - "${scriptaddr} ${prefix}extlinux.conf\0" \ + "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \ \ "sysboot_boot=" \ "if test -e ${devtype} ${devnum}:${rootpart} " \ - "${prefix}extlinux.conf; then " \ - "echo Found extlinux config " \ - "${prefix}extlinux.conf; " \ + "${prefix}extlinux/extlinux.conf; then " \ + "echo Found ${prefix}extlinux/extlinux.conf; " \ "run do_sysboot_boot; " \ "echo SCRIPT FAILED: continuing...; " \ "fi\0" \ @@ -174,6 +173,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ + "fdt_high=ffffffff\0" \ + "initrd_high=ffffffff\0" \ BOOTCMDS_COMMON \ BOARD_EXTRA_ENV_SETTINGS diff --git a/include/configs/tegra-common-ums.h b/include/configs/tegra-common-ums.h new file mode 100644 index 0000000000..578ca68b57 --- /dev/null +++ b/include/configs/tegra-common-ums.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA_COMMON_UMS_H_ +#define _TEGRA_COMMON_UMS_H_ + +#ifndef CONFIG_SPL_BUILD +/* USB gadget, and mass storage protocol */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CI_UDC +#define CONFIG_CI_UDC_HAS_HOSTPC +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_G_DNL_VENDOR_NUM 0x0955 +#define CONFIG_G_DNL_PRODUCT_NUM 0x701A +#define CONFIG_G_DNL_MANUFACTURER "NVIDIA" +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_CMD_USB_MASS_STORAGE +#endif + +#endif /* _TEGRA_COMMON_UMS_H */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 129acf2cbf..3b88a83c04 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -19,6 +19,9 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ +#define CONFIG_DM +#define CONFIG_CMD_DM + #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 128b66edef..80976e7e3b 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -75,6 +75,15 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif +/* + * When building U-Boot such that there is no previous loader + * we need to call board_early_init_f. This is taken care of in + * s_init when we have SPL used. + */ +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) +#define CONFIG_BOARD_EARLY_INIT_F +#endif + #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ #endif diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 485427276a..6e0bf09058 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -127,7 +127,7 @@ * we are on so we do not need to rely on the command prompt. We set a * console baudrate of 115200 and use the default baud rate table. */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_MALLOC_LEN (16 << 20) #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "U-Boot# " #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -196,7 +196,8 @@ * under common/spl/. Given our generally common memory map, we set a * number of related defaults and sizes here. */ -#ifndef CONFIG_NOR_BOOT +#if !defined(CONFIG_NOR_BOOT) && \ + !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX)) #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_OS_BOOT diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 44b37183b6..30b02f6b03 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -126,7 +126,7 @@ "if test $board_name = panda-es; then " \ "setenv fdtfile omap4-panda-es.dtb; fi;" \ "if test $board_name = duovero; then " \ - "setenv fdtfile omap4-duovero.dtb; fi;" \ + "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index a582fa4041..cb928ab8e6 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -67,6 +67,7 @@ #define PARTS_DEFAULT #endif +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "console=" CONSOLEDEV ",115200n8\0" \ @@ -116,6 +117,8 @@ "setenv fdtfile omap5-uevm.dtb; fi; " \ "if test $board_name = dra7xx; then " \ "setenv fdtfile dra7-evm.dtb; fi;" \ + "if test $board_name = dra72x; then " \ + "setenv fdtfile dra72-evm.dtb; fi;" \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \ diff --git a/include/configs/tseries.h b/include/configs/tseries.h index e550afad4f..1fd6e32baf 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -157,7 +157,6 @@ /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ #define CONFIG_NAND_OMAP_ELM #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) #define CONFIG_SYS_NAND_PAGE_SIZE 2048 diff --git a/include/configs/v37.h b/include/configs/v37.h deleted file mode 100644 index 0d01fe207e..0000000000 --- a/include/configs/v37.h +++ /dev/null @@ -1,375 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_V37 1 /* ...on a Marel V37 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_LCD -#define CONFIG_MPC8XX_LCD -#define CONFIG_SHARP_LQ084V1DG21 -#undef CONFIG_LCD_LOGO - -/*----------------------------------------------------------------------------- - * I2C Configuration - *----------------------------------------------------------------------------- - */ -#define CONFIG_I2C 1 -#define CONFIG_SYS_I2C_SLAVE 0x2 - -#define CONFIG_8xx_CONS_SMC1 1 -#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 115kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs console=tty0 " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_DATE - - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=v37-1" -#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" -*/ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE0 0x40000000 -#define CONFIG_SYS_FLASH_BASE1 0x60000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE1 - -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_ADDR 0x80000000/* Address of Environment */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#define CONFIG_ENV_OFFSET 0 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR 0xFFFFFF88 -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) -/* -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) -*/ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */ - -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -#define CONFIG_SYS_OR_TIMING_FLASH 0xF56 - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V) - -#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V) - -/* - * BR1 and OR1 (Battery backed SRAM) - */ -#define CONFIG_SYS_BR1_PRELIM 0x80000401 -#define CONFIG_SYS_OR1_PRELIM 0xFFC00736 - -/* - * BR2 and OR2 (SDRAM) - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB */ - -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* Marel V37 mem setting */ - -#define CONFIG_SYS_BR3_CAN 0xC0000401 -#define CONFIG_SYS_OR3_CAN 0xFFFF0724 - -/* -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 -*/ - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV16 - -/* - * MAMR settings for SDRAM - */ - -/* 10 column SDRAM */ -#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \ - MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 2d75f5013f..c4a1b94b98 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -63,6 +63,7 @@ /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -74,6 +75,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +#include "tegra-common-ums.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index dff6adcc7c..1905d133e2 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -10,9 +10,20 @@ #define DEBUG +#ifdef CONFIG_BASE_FVP +#ifndef CONFIG_SEMIHOSTING +#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING +#endif +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_ARMV8_SWITCH_TO_EL1 +#endif + #define CONFIG_REMAKE_ELF +#ifndef CONFIG_BASE_FVP +/* Base FVP not using GICv3 yet */ #define CONFIG_GICV3 +#endif /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ @@ -30,8 +41,14 @@ #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" /* Link Definitions */ +#ifdef CONFIG_BASE_FVP +/* ATF loads u-boot here for BASE_FVP model */ +#define CONFIG_SYS_TEXT_BASE 0x88000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#else #define CONFIG_SYS_TEXT_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#endif /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT @@ -39,7 +56,11 @@ #define CONFIG_DEFAULT_DEVICE_TREE vexpress64 /* SMP Spin Table Definitions */ +#ifdef CONFIG_BASE_FVP +#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#else #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#endif /* CS register bases for the original memory map. */ #define V2M_PA_CS0 0x00000000 @@ -99,9 +120,15 @@ #define GICD_BASE (0x2f000000) #define GICR_BASE (0x2f100000) #else + +#ifdef CONFIG_BASE_FVP +#define GICD_BASE (0x2f000000) +#define GICC_BASE (0x2c000000) +#else #define GICD_BASE (0x2C001000) #define GICC_BASE (0x2C002000) #endif +#endif #define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) @@ -121,7 +148,6 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_SERIAL0 V2M_UART0 #define CONFIG_SYS_SERIAL1 V2M_UART1 @@ -165,17 +191,41 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Initial environment variables */ +#ifdef CONFIG_BASE_FVP +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_name=uImage\0" \ + "kernel_addr_r=0x80000000\0" \ + "initrd_name=ramdisk.img\0" \ + "initrd_addr_r=0x88000000\0" \ + "fdt_name=devtree.dtb\0" \ + "fdt_addr_r=0x83000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" + +#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\ + "0x1c090000 debug user_debug=31 "\ + "loglevel=9" + +#define CONFIG_BOOTCOMMAND "fdt addr $fdt_addr_r; fdt resize; " \ + "fdt chosen $initrd_addr_r $initrd_end; " \ + "bootm $kernel_addr_r - $fdt_addr_r" + +#define CONFIG_BOOTDELAY 1 + +#else + #define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr=0x200000\0" \ - "initrd_addr=0xa00000\0" \ + "kernel_addr_r=0x200000\0" \ + "initrd_addr_r=0xa00000\0" \ "initrd_size=0x2000000\0" \ - "fdt_addr=0x100000\0" \ + "fdt_addr_r=0x100000\0" \ "fdt_high=0xa0000000\0" #define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0" -#define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \ - "$initrd_addr:$initrd_size $fdt_addr" +#define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \ + "$initrd_addr_r:$initrd_size $fdt_addr_r" #define CONFIG_BOOTDELAY -1 +#endif /* Do not preserve environment */ #define CONFIG_ENV_IS_NOWHERE 1 @@ -187,7 +237,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 500fd2fd61..0342550412 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -68,6 +68,18 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL +/* QSPI Configs*/ +#define CONFIG_FSL_QSPI + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SYS_FSL_QSPI_LE +#endif + /* I2C Configs */ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 14c6e675c1..bef821f337 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -13,8 +13,6 @@ /*--------------------------------------------------------------------------*/ -#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */ -#define CONFIG_AT91FAMILY #define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ #define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 695bc230c0..259205e881 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -55,7 +55,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 #define CONFIG_RTC_MC13XXX diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index dc5bc22ce9..fa252c0b13 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -225,6 +225,7 @@ /* FIT support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ #define CONFIG_OF_CONTROL diff --git a/include/dm-demo.h b/include/dm-demo.h index 6e38d3c5b3..a24fec6658 100644 --- a/include/dm-demo.h +++ b/include/dm-demo.h @@ -23,14 +23,14 @@ struct dm_demo_pdata { }; struct demo_ops { - int (*hello)(struct device *dev, int ch); - int (*status)(struct device *dev, int *status); + int (*hello)(struct udevice *dev, int ch); + int (*status)(struct udevice *dev, int *status); }; -int demo_hello(struct device *dev, int ch); -int demo_status(struct device *dev, int *status); +int demo_hello(struct udevice *dev, int ch); +int demo_status(struct udevice *dev, int *status); int demo_list(void); -int demo_parse_dt(struct device *dev); +int demo_parse_dt(struct udevice *dev); #endif diff --git a/include/dm.h b/include/dm.h index 8bbb21b575..a179c8a6e3 100644 --- a/include/dm.h +++ b/include/dm.h @@ -5,7 +5,7 @@ */ #ifndef _DM_H_ -#define _DM_H +#define _DM_H_ #include <dm/device.h> #include <dm/platdata.h> diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index c026e8e49c..26e5cf530e 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -11,7 +11,7 @@ #ifndef _DM_DEVICE_INTERNAL_H #define _DM_DEVICE_INTERNAL_H -struct device; +struct udevice; /** * device_bind() - Create a device and bind it to a driver @@ -34,9 +34,9 @@ struct device; * @devp: Returns a pointer to the bound device * @return 0 if OK, -ve on error */ -int device_bind(struct device *parent, struct driver *drv, +int device_bind(struct udevice *parent, struct driver *drv, const char *name, void *platdata, int of_offset, - struct device **devp); + struct udevice **devp); /** * device_bind_by_name: Create a device and bind it to a driver @@ -49,8 +49,8 @@ int device_bind(struct device *parent, struct driver *drv, * @devp: Returns a pointer to the bound device * @return 0 if OK, -ve on error */ -int device_bind_by_name(struct device *parent, const struct driver_info *info, - struct device **devp); +int device_bind_by_name(struct udevice *parent, const struct driver_info *info, + struct udevice **devp); /** * device_probe() - Probe a device, activating it @@ -61,7 +61,7 @@ int device_bind_by_name(struct device *parent, const struct driver_info *info, * @dev: Pointer to device to probe * @return 0 if OK, -ve on error */ -int device_probe(struct device *dev); +int device_probe(struct udevice *dev); /** * device_remove() - Remove a device, de-activating it @@ -72,7 +72,7 @@ int device_probe(struct device *dev); * @dev: Pointer to device to remove * @return 0 if OK, -ve on error (an error here is normally a very bad thing) */ -int device_remove(struct device *dev); +int device_remove(struct udevice *dev); /** * device_unbind() - Unbind a device, destroying it @@ -82,6 +82,10 @@ int device_remove(struct device *dev); * @dev: Pointer to device to unbind * @return 0 if OK, -ve on error */ -int device_unbind(struct device *dev); +int device_unbind(struct udevice *dev); + +/* Cast away any volatile pointer */ +#define DM_ROOT_NON_CONST (((gd_t *)gd)->dm_root) +#define DM_UCLASS_ROOT_NON_CONST (((gd_t *)gd)->uclass_root) #endif diff --git a/include/dm/device.h b/include/dm/device.h index 4cd38ed2d0..ae75a3f54d 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -21,10 +21,10 @@ struct driver_info; #define DM_FLAG_ACTIVATED (1 << 0) /* DM is responsible for allocating and freeing platdata */ -#define DM_FLAG_ALLOC_PDATA (2 << 0) +#define DM_FLAG_ALLOC_PDATA (1 << 1) /** - * struct device - An instance of a driver + * struct udevice - An instance of a driver * * This holds information about a device, which is a driver bound to a * particular port or peripheral (essentially a driver instance). @@ -53,12 +53,12 @@ struct driver_info; * @sibling_node: Next device in list of all devices * @flags: Flags for this device DM_FLAG_... */ -struct device { +struct udevice { struct driver *driver; const char *name; void *platdata; int of_offset; - struct device *parent; + struct udevice *parent; void *priv; struct uclass *uclass; void *uclass_priv; @@ -75,11 +75,11 @@ struct device { #define device_active(dev) ((dev)->flags & DM_FLAG_ACTIVATED) /** - * struct device_id - Lists the compatible strings supported by a driver + * struct udevice_id - Lists the compatible strings supported by a driver * @compatible: Compatible string * @data: Data for this compatible string */ -struct device_id { +struct udevice_id { const char *compatible; ulong data; }; @@ -121,12 +121,12 @@ struct device_id { struct driver { char *name; enum uclass_id id; - const struct device_id *of_match; - int (*bind)(struct device *dev); - int (*probe)(struct device *dev); - int (*remove)(struct device *dev); - int (*unbind)(struct device *dev); - int (*ofdata_to_platdata)(struct device *dev); + const struct udevice_id *of_match; + int (*bind)(struct udevice *dev); + int (*probe)(struct udevice *dev); + int (*remove)(struct udevice *dev); + int (*unbind)(struct udevice *dev); + int (*ofdata_to_platdata)(struct udevice *dev); int priv_auto_alloc_size; int platdata_auto_alloc_size; const void *ops; /* driver-specific operations */ @@ -144,7 +144,7 @@ struct driver { * @dev Device to check * @return platform data, or NULL if none */ -void *dev_get_platdata(struct device *dev); +void *dev_get_platdata(struct udevice *dev); /** * dev_get_priv() - Get the private data for a device @@ -154,6 +154,6 @@ void *dev_get_platdata(struct device *dev); * @dev Device to check * @return private data, or NULL if none */ -void *dev_get_priv(struct device *dev); +void *dev_get_priv(struct udevice *dev); #endif diff --git a/include/dm/lists.h b/include/dm/lists.h index 0d09f9a14f..49d87e6176 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -32,8 +32,28 @@ struct driver *lists_driver_lookup_name(const char *name); */ struct uclass_driver *lists_uclass_lookup(enum uclass_id id); -int lists_bind_drivers(struct device *parent); +/** + * lists_bind_drivers() - search for and bind all drivers to parent + * + * This searches the U_BOOT_DEVICE() structures and creates new devices for + * each one. The devices will have @parent as their parent. + * + * @parent: parent driver (root) + * @early_only: If true, bind only drivers with the DM_INIT_F flag. If false + * bind all drivers. + */ +int lists_bind_drivers(struct udevice *parent); -int lists_bind_fdt(struct device *parent, const void *blob, int offset); +/** + * lists_bind_fdt() - bind a device tree node + * + * This creates a new device bound to the given device tree node, with + * @parent as its parent. + * + * @parent: parent driver (root) + * @blob: device tree blob + * @offset: offset of this device tree node + */ +int lists_bind_fdt(struct udevice *parent, const void *blob, int offset); #endif diff --git a/include/dm/root.h b/include/dm/root.h index 0ebccda355..a4826a6e3c 100644 --- a/include/dm/root.h +++ b/include/dm/root.h @@ -10,7 +10,7 @@ #ifndef _DM_ROOT_H_ #define _DM_ROOT_H_ -struct device; +struct udevice; /** * dm_root() - Return pointer to the top of the driver tree @@ -19,7 +19,7 @@ struct device; * * @return pointer to root device, or NULL if not inited yet */ -struct device *dm_root(void); +struct udevice *dm_root(void); /** * dm_scan_platdata() - Scan all platform data and bind drivers @@ -41,7 +41,7 @@ int dm_scan_platdata(void); int dm_scan_fdt(const void *blob); /** - * dm_init() - Initialize Driver Model structures + * dm_init() - Initialise Driver Model structures * * This function will initialize roots of driver tree and class tree. * This needs to be called before anything uses the DM diff --git a/include/dm/test.h b/include/dm/test.h index eeaa2eb2f4..409f1a3667 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -30,7 +30,7 @@ struct dm_test_pdata { * @return 0 if OK, -ve on error */ struct test_ops { - int (*ping)(struct device *dev, int pingval, int *pingret); + int (*ping)(struct udevice *dev, int pingval, int *pingret); }; /* Operations that our test driver supports */ @@ -102,8 +102,8 @@ extern struct dm_test_state global_test_state; * @skip_post_probe: Skip uclass post-probe processing */ struct dm_test_state { - struct device *root; - struct device *testdev; + struct udevice *root; + struct udevice *testdev; int fail_count; int force_fail_alloc; int skip_post_probe; @@ -138,8 +138,8 @@ struct dm_test { } /* Declare ping methods for the drivers */ -int test_ping(struct device *dev, int pingval, int *pingret); -int testfdt_ping(struct device *dev, int pingval, int *pingret); +int test_ping(struct udevice *dev, int pingval, int *pingret); +int testfdt_ping(struct udevice *dev, int pingval, int *pingret); /** * dm_check_operations() - Check that we can perform ping operations @@ -152,7 +152,7 @@ int testfdt_ping(struct device *dev, int pingval, int *pingret); * @priv: Pointer to private test information * @return 0 if OK, -ve on error */ -int dm_check_operations(struct dm_test_state *dms, struct device *dev, +int dm_check_operations(struct dm_test_state *dms, struct udevice *dev, uint32_t base, struct dm_test_priv *priv); /** diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index cc65d5259f..1434db3eb4 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -21,7 +21,7 @@ * @return the uclass pointer of a child at the given index or * return NULL on error. */ -int uclass_find_device(enum uclass_id id, int index, struct device **devp); +int uclass_find_device(enum uclass_id id, int index, struct udevice **devp); /** * uclass_bind_device() - Associate device with a uclass @@ -31,7 +31,7 @@ int uclass_find_device(enum uclass_id id, int index, struct device **devp); * @dev: Pointer to the device * #return 0 on success, -ve on error */ -int uclass_bind_device(struct device *dev); +int uclass_bind_device(struct udevice *dev); /** * uclass_unbind_device() - Deassociate device with a uclass @@ -41,7 +41,7 @@ int uclass_bind_device(struct device *dev); * @dev: Pointer to the device * #return 0 on success, -ve on error */ -int uclass_unbind_device(struct device *dev); +int uclass_unbind_device(struct udevice *dev); /** * uclass_post_probe_device() - Deal with a device that has just been probed @@ -52,7 +52,7 @@ int uclass_unbind_device(struct device *dev); * @dev: Pointer to the device * #return 0 on success, -ve on error */ -int uclass_post_probe_device(struct device *dev); +int uclass_post_probe_device(struct udevice *dev); /** * uclass_pre_remove_device() - Handle a device which is about to be removed @@ -62,7 +62,7 @@ int uclass_post_probe_device(struct device *dev); * @dev: Pointer to the device * #return 0 on success, -ve on error */ -int uclass_pre_remove_device(struct device *dev); +int uclass_pre_remove_device(struct udevice *dev); /** * uclass_find() - Find uclass by its id diff --git a/include/dm/uclass.h b/include/dm/uclass.h index cd23cfed16..afd9923fb3 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -26,7 +26,7 @@ * @priv: Private data for this uclass * @uc_drv: The driver for the uclass itself, not to be confused with a * 'struct driver' - * dev_head: List of devices in this uclass (devices are attached to their + * @dev_head: List of devices in this uclass (devices are attached to their * uclass when their bind method is called) * @sibling_node: Next uclass in the linked list of uclasses */ @@ -37,7 +37,7 @@ struct uclass { struct list_head sibling_node; }; -struct device; +struct udevice; /** * struct uclass_driver - Driver for the uclass @@ -65,10 +65,10 @@ struct device; struct uclass_driver { const char *name; enum uclass_id id; - int (*post_bind)(struct device *dev); - int (*pre_unbind)(struct device *dev); - int (*post_probe)(struct device *dev); - int (*pre_remove)(struct device *dev); + int (*post_bind)(struct udevice *dev); + int (*pre_unbind)(struct udevice *dev); + int (*post_probe)(struct udevice *dev); + int (*pre_remove)(struct udevice *dev); int (*init)(struct uclass *class); int (*destroy)(struct uclass *class); int priv_auto_alloc_size; @@ -96,12 +96,14 @@ int uclass_get(enum uclass_id key, struct uclass **ucp); /** * uclass_get_device() - Get a uclass device based on an ID and index * + * The device is probed to activate it ready for use. + * * id: ID to look up * @index: Device number within that uclass (0=first) - * @ucp: Returns pointer to uclass (there is only one per for each ID) + * @devp: Returns pointer to device (there is only one per for each ID) * @return 0 if OK, -ve on error */ -int uclass_get_device(enum uclass_id id, int index, struct device **ucp); +int uclass_get_device(enum uclass_id id, int index, struct udevice **devp); /** * uclass_first_device() - Get the first device in a uclass @@ -110,7 +112,7 @@ int uclass_get_device(enum uclass_id id, int index, struct device **ucp); * @devp: Returns pointer to the first device in that uclass, or NULL if none * @return 0 if OK (found or not found), -1 on error */ -int uclass_first_device(enum uclass_id id, struct device **devp); +int uclass_first_device(enum uclass_id id, struct udevice **devp); /** * uclass_next_device() - Get the next device in a uclass @@ -119,7 +121,7 @@ int uclass_first_device(enum uclass_id id, struct device **devp); * to the next device in the same uclass, or NULL if none * @return 0 if OK (found or not found), -1 on error */ -int uclass_next_device(struct device **devp); +int uclass_next_device(struct udevice **devp); /** * uclass_foreach_dev() - Helper function to iteration through devices @@ -127,9 +129,9 @@ int uclass_next_device(struct device **devp); * This creates a for() loop which works through the available devices in * a uclass in order from start to end. * - * @pos: struct device * to hold the current device. Set to NULL when there + * @pos: struct udevice * to hold the current device. Set to NULL when there * are no more devices. - * uc: uclass to scan + * @uc: uclass to scan */ #define uclass_foreach_dev(pos, uc) \ for (pos = list_entry((&(uc)->dev_head)->next, typeof(*pos), \ diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h new file mode 100644 index 0000000000..e6b1e0a808 --- /dev/null +++ b/include/dt-bindings/gpio/gpio.h @@ -0,0 +1,15 @@ +/* + * This header provides constants for most GPIO bindings. + * + * Most GPIO bindings include a flags cell as part of the GPIO specifier. + * In most cases, the format of the flags cell uses the standard values + * defined in this header. + */ + +#ifndef _DT_BINDINGS_GPIO_GPIO_H +#define _DT_BINDINGS_GPIO_GPIO_H + +#define GPIO_ACTIVE_HIGH 0 +#define GPIO_ACTIVE_LOW 1 + +#endif diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h new file mode 100644 index 0000000000..197dc28b67 --- /dev/null +++ b/include/dt-bindings/gpio/tegra-gpio.h @@ -0,0 +1,51 @@ +/* + * This header provides constants for binding nvidia,tegra*-gpio. + * + * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below + * provide names for this. + * + * The second cell contains standard flag values specified in gpio.h. + */ + +#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H +#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H + +#include <dt-bindings/gpio/gpio.h> + +#define TEGRA_GPIO_BANK_ID_A 0 +#define TEGRA_GPIO_BANK_ID_B 1 +#define TEGRA_GPIO_BANK_ID_C 2 +#define TEGRA_GPIO_BANK_ID_D 3 +#define TEGRA_GPIO_BANK_ID_E 4 +#define TEGRA_GPIO_BANK_ID_F 5 +#define TEGRA_GPIO_BANK_ID_G 6 +#define TEGRA_GPIO_BANK_ID_H 7 +#define TEGRA_GPIO_BANK_ID_I 8 +#define TEGRA_GPIO_BANK_ID_J 9 +#define TEGRA_GPIO_BANK_ID_K 10 +#define TEGRA_GPIO_BANK_ID_L 11 +#define TEGRA_GPIO_BANK_ID_M 12 +#define TEGRA_GPIO_BANK_ID_N 13 +#define TEGRA_GPIO_BANK_ID_O 14 +#define TEGRA_GPIO_BANK_ID_P 15 +#define TEGRA_GPIO_BANK_ID_Q 16 +#define TEGRA_GPIO_BANK_ID_R 17 +#define TEGRA_GPIO_BANK_ID_S 18 +#define TEGRA_GPIO_BANK_ID_T 19 +#define TEGRA_GPIO_BANK_ID_U 20 +#define TEGRA_GPIO_BANK_ID_V 21 +#define TEGRA_GPIO_BANK_ID_W 22 +#define TEGRA_GPIO_BANK_ID_X 23 +#define TEGRA_GPIO_BANK_ID_Y 24 +#define TEGRA_GPIO_BANK_ID_Z 25 +#define TEGRA_GPIO_BANK_ID_AA 26 +#define TEGRA_GPIO_BANK_ID_BB 27 +#define TEGRA_GPIO_BANK_ID_CC 28 +#define TEGRA_GPIO_BANK_ID_DD 29 +#define TEGRA_GPIO_BANK_ID_EE 30 +#define TEGRA_GPIO_BANK_ID_FF 31 + +#define TEGRA_GPIO(bank, offset) \ + ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset) + +#endif diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h new file mode 100644 index 0000000000..1ea1b702fe --- /dev/null +++ b/include/dt-bindings/interrupt-controller/arm-gic.h @@ -0,0 +1,22 @@ +/* + * This header provides constants for the ARM GIC. + */ + +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H + +#include <dt-bindings/interrupt-controller/irq.h> + +/* interrupt specific cell 0 */ + +#define GIC_SPI 0 +#define GIC_PPI 1 + +/* + * Interrupt specifier cell 2. + * The flaggs in irq.h are valid, plus those below. + */ +#define GIC_CPU_MASK_RAW(x) ((x) << 8) +#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1) + +#endif diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h new file mode 100644 index 0000000000..33a1003c55 --- /dev/null +++ b/include/dt-bindings/interrupt-controller/irq.h @@ -0,0 +1,19 @@ +/* + * This header provides constants for most IRQ bindings. + * + * Most IRQ bindings include a flags cell as part of the IRQ specifier. + * In most cases, the format of the flags cell uses the standard values + * defined in this header. + */ + +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H + +#define IRQ_TYPE_NONE 0 +#define IRQ_TYPE_EDGE_RISING 1 +#define IRQ_TYPE_EDGE_FALLING 2 +#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING) +#define IRQ_TYPE_LEVEL_HIGH 4 +#define IRQ_TYPE_LEVEL_LOW 8 + +#endif diff --git a/include/dwmmc.h b/include/dwmmc.h index c9bdf51a67..b67f11b113 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -123,6 +123,9 @@ #define DWMCI_BMOD_IDMAC_FB (1 << 1) #define DWMCI_BMOD_IDMAC_EN (1 << 7) +/* UHS register */ +#define DWMCI_DDR_MODE (1 << 16) + /* quirks */ #define DWMCI_QUIRK_DISABLE_SMU (1 << 0) @@ -134,7 +137,9 @@ struct dwmci_host { unsigned int version; unsigned int clock; unsigned int bus_hz; + unsigned int div; int dev_index; + int dev_id; int buswidth; u32 clksel_val; u32 fifoth_val; diff --git a/include/fat.h b/include/fat.h index 81d9790420..63cf78779b 100644 --- a/include/fat.h +++ b/include/fat.h @@ -18,7 +18,11 @@ #define VFAT_MAXSEQ 9 /* Up to 9 of 13 2-byte UTF-16 entries */ #define PREFETCH_BLOCKS 2 -#define MAX_CLUSTSIZE 65536 +#ifndef CONFIG_FS_FAT_MAX_CLUSTSIZE +#define CONFIG_FS_FAT_MAX_CLUSTSIZE 65536 +#endif +#define MAX_CLUSTSIZE CONFIG_FS_FAT_MAX_CLUSTSIZE + #define DIRENTSPERBLOCK (mydata->sect_size / sizeof(dir_entry)) #define DIRENTSPERCLUST ((mydata->clust_size * mydata->sect_size) / \ sizeof(dir_entry)) diff --git a/include/fdt_support.h b/include/fdt_support.h index ae010bb624..fd44d7e2f6 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -16,8 +16,8 @@ u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, const char *prop, const u32 dflt); u32 fdt_getprop_u32_default(const void *fdt, const char *path, const char *prop, const u32 dflt); -int fdt_chosen(void *fdt, int force); -int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force); +int fdt_chosen(void *fdt); +int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); void do_fixup_by_path(void *fdt, const char *path, const char *prop, const void *val, int len, int create); void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, @@ -113,17 +113,25 @@ static inline int fdt_status_disabled(void *fdt, int nodeoffset) { return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); } +static inline int fdt_status_fail(void *fdt, int nodeoffset) +{ + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); +} -int fdt_set_status_by_alias(void *fdt, const char* alias, +int fdt_set_status_by_alias(void *fdt, const char *alias, enum fdt_status status, unsigned int error_code); -static inline int fdt_status_okay_by_alias(void *fdt, const char* alias) +static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) { return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); } -static inline int fdt_status_disabled_by_alias(void *fdt, const char* alias) +static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) { return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); } +static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) +{ + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); +} #endif /* ifdef CONFIG_OF_LIBFDT */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 3196cf6683..a7e6ee7fdf 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -81,7 +81,7 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */ COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */ COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */ - COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */ + COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */ COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */ COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ @@ -92,6 +92,8 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */ COMPAT_SANDBOX_HOST_EMULATION, /* Sandbox emulation of a function */ COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */ + COMPAT_TI_TPS65090, /* Texas Instrument TPS65090 */ + COMPAT_NXP_PTN3460, /* NXP PTN3460 DP/LVDS bridge */ COMPAT_COUNT, }; diff --git a/include/fsl_mc.h b/include/fsl_mc.h new file mode 100644 index 0000000000..b9f089e5f3 --- /dev/null +++ b/include/fsl_mc.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_MC_H__ +#define __FSL_MC_H__ + +#include <common.h> + +#define MC_CCSR_BASE_ADDR \ + ((struct mc_ccsr_registers __iomem *)0x8340000) + +#define BIT(x) (1 << (x)) +#define GCR1_P1_STOP BIT(31) +#define GCR1_P2_STOP BIT(30) +#define GCR1_P1_DE_RST BIT(23) +#define GCR1_P2_DE_RST BIT(22) +#define GCR1_M1_DE_RST BIT(15) +#define GCR1_M2_DE_RST BIT(14) +#define GCR1_M_ALL_DE_RST (GCR1_M1_DE_RST | GCR1_M2_DE_RST) +#define GSR_FS_MASK 0x3fffffff +#define MCFAPR_PL_MASK (0x1 << 18) +#define MCFAPR_BMT_MASK (0x1 << 17) +#define MCFAPR_BYPASS_ICID_MASK \ + (MCFAPR_PL_MASK | MCFAPR_BMT_MASK) + +#define SOC_MC_PORTALS_BASE_ADDR ((void __iomem *)0x00080C000000) +#define SOC_MC_PORTAL_STRIDE 0x10000 + +#define SOC_MC_PORTAL_ADDR(_portal_id) \ + ((void __iomem *)((uintptr_t)SOC_MC_PORTALS_BASE_ADDR + \ + (_portal_id) * SOC_MC_PORTAL_STRIDE)) + +struct mc_ccsr_registers { + u32 reg_gcr1; + u32 reserved1; + u32 reg_gsr; + u32 reserved2; + u32 reg_sicbalr; + u32 reg_sicbahr; + u32 reg_sicapr; + u32 reserved3; + u32 reg_mcfbalr; + u32 reg_mcfbahr; + u32 reg_mcfapr; + u32 reserved4[0x2f1]; + u32 reg_psr; + u32 reserved5; + u32 reg_brr[2]; + u32 reserved6[0x80]; + u32 reg_error[]; +}; + +int mc_init(bd_t *bis); + +int get_mc_boot_status(void); +#endif diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 85ddbcb93b..276a01e744 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -43,10 +43,12 @@ struct ihs_gpio { }; struct ihs_i2c { - u16 write_mailbox; + u16 interrupt_status; + u16 interrupt_enable; u16 write_mailbox_ext; - u16 read_mailbox; + u16 write_mailbox; u16 read_mailbox_ext; + u16 read_mailbox; }; struct ihs_osd { @@ -84,7 +86,6 @@ struct ihs_fpga { #endif #ifdef CONFIG_IO64 - struct ihs_fpga_channel { u16 status_int; u16 config_int; @@ -121,9 +122,9 @@ struct ihs_fpga { u16 reserved_0[6]; /* 0x0008 */ struct ihs_gpio gpio; /* 0x0014 */ u16 mpc3w_control; /* 0x001a */ - u16 reserved_1[19]; /* 0x001c */ - u16 videocontrol; /* 0x0042 */ - u16 reserved_2[14]; /* 0x0044 */ + u16 reserved_1[18]; /* 0x001c */ + struct ihs_i2c i2c; /* 0x0040 */ + u16 reserved_2[10]; /* 0x004c */ u16 mc_int; /* 0x0060 */ u16 mc_int_en; /* 0x0062 */ u16 mc_status; /* 0x0064 */ @@ -150,15 +151,13 @@ struct ihs_fpga { u16 fpga_features; /* 0x0006 */ u16 reserved_0[10]; /* 0x0008 */ u16 extended_interrupt; /* 0x001c */ - u16 reserved_1[9]; /* 0x001e */ - struct ihs_i2c i2c; /* 0x0030 */ - u16 reserved_2[16]; /* 0x0038 */ + u16 reserved_1[29]; /* 0x001e */ u16 mpc3w_control; /* 0x0058 */ - u16 reserved_3[34]; /* 0x005a */ - u16 videocontrol; /* 0x009e */ - u16 reserved_4[176]; /* 0x00a0 */ + u16 reserved_2[3]; /* 0x005a */ + struct ihs_i2c i2c; /* 0x0060 */ + u16 reserved_3[205]; /* 0x0066 */ struct ihs_osd osd; /* 0x0200 */ - u16 reserved_5[761]; /* 0x020e */ + u16 reserved_4[761]; /* 0x020e */ u16 videomem[31736]; /* 0x0800 */ }; #endif diff --git a/include/hash.h b/include/hash.h index dc21678045..d8ec4f08e1 100644 --- a/include/hash.h +++ b/include/hash.h @@ -6,6 +6,18 @@ #ifndef _HASH_H #define _HASH_H +/* + * Maximum digest size for all algorithms we support. Having this value + * avoids a malloc() or C99 local declaration in common/cmd_hash.c. + */ +#define HASH_MAX_DIGEST_SIZE 32 + +enum { + HASH_FLAG_VERIFY = 1 << 0, /* Enable verify mode */ + HASH_FLAG_ENV = 1 << 1, /* Allow env vars */ +}; + +#ifndef USE_HOSTCC #if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY) #define CONFIG_HASH_VERIFY #endif @@ -65,17 +77,6 @@ struct hash_algo { int size); }; -/* - * Maximum digest size for all algorithms we support. Having this value - * avoids a malloc() or C99 local declaration in common/cmd_hash.c. - */ -#define HASH_MAX_DIGEST_SIZE 32 - -enum { - HASH_FLAG_VERIFY = 1 << 0, /* Enable verify mode */ - HASH_FLAG_ENV = 1 << 1, /* Allow env vars */ -}; - /** * hash_command: Process a hash command for a particular algorithm * @@ -125,4 +126,20 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. */ int hash_lookup_algo(const char *algo_name, struct hash_algo **algop); + +/** + * hash_show() - Print out a hash algorithm and value + * + * You will get a message like this (without a newline at the end): + * + * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257" + * + * @algo: Algorithm used for hash + * @addr: Address of data that was hashed + * @len: Length of data that was hashed + * @output: Hash value to display + */ +void hash_show(struct hash_algo *algo, ulong addr, ulong len, + uint8_t *output); +#endif /* !USE_HOSTCC */ #endif diff --git a/include/image.h b/include/image.h index 18861686cc..3e8f78d583 100644 --- a/include/image.h +++ b/include/image.h @@ -45,6 +45,7 @@ struct lmb; #endif /* USE_HOSTCC */ #if defined(CONFIG_FIT) +#include <hash.h> #include <libfdt.h> #include <fdt_support.h> # ifdef CONFIG_SPL_BUILD @@ -71,6 +72,11 @@ struct lmb; # define IMAGE_ENABLE_SHA256 1 # endif +#ifdef CONFIG_FIT_DISABLE_SHA256 +#undef CONFIG_SHA256 +#undef IMAGE_ENABLE_SHA256 +#endif + #ifndef IMAGE_ENABLE_CRC32 #define IMAGE_ENABLE_CRC32 0 #endif @@ -225,6 +231,7 @@ struct lmb; #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ #define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ #define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */ +#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */ /* * Compression Types @@ -411,7 +418,9 @@ enum fit_load_op { #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 +#if defined(CONFIG_IMAGE_FORMAT_LEGACY) #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ +#endif #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */ @@ -421,6 +430,7 @@ ulong genimg_get_image(ulong img_addr); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); +#endif /** * fit_image_load() - load an image from a FIT @@ -430,8 +440,9 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, * out progress messages, checking the type/arch/os and optionally copying it * to the right load address. * + * The property to look up is defined by image_type. + * * @param images Boot images structure - * @param prop_name Property name to look up (FIT_..._PROP) * @param addr Address of FIT in memory * @param fit_unamep On entry this is the requested image name * (e.g. "kernel@1") or NULL to use the default. On exit @@ -449,12 +460,14 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, * @param load_op Decribes what to do with the load address * @param datap Returns address of loaded image * @param lenp Returns length of loaded image + * @return node offset of image, or -ve error code on error */ -int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr, +int fit_image_load(bootm_headers_t *images, ulong addr, const char **fit_unamep, const char **fit_uname_configp, int arch, int image_type, int bootstage_id, enum fit_load_op load_op, ulong *datap, ulong *lenp); +#ifndef USE_HOSTCC /** * fit_get_node_from_config() - Look up an image a FIT by type * @@ -599,8 +612,8 @@ int image_check_dcrc(const image_header_t *hdr); ulong getenv_bootm_low(void); phys_size_t getenv_bootm_size(void); phys_size_t getenv_bootm_mapsize(void); -void memmove_wd(void *to, void *from, size_t len, ulong chunksz); #endif +void memmove_wd(void *to, void *from, size_t len, ulong chunksz); static inline int image_check_magic(const image_header_t *hdr) { @@ -703,7 +716,7 @@ int bootz_setup(ulong image, ulong *start, ulong *end); #define FIT_FDT_PROP "fdt" #define FIT_DEFAULT_PROP "default" -#define FIT_MAX_HASH_LEN 20 /* max(crc32_len(4), sha1_len(20)) */ +#define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE /* cmdline argument format parsing */ int fit_parse_conf(const char *spec, ulong addr_curr, @@ -878,7 +891,7 @@ struct image_region { }; #if IMAGE_ENABLE_VERIFY -# include <rsa-checksum.h> +# include <u-boot/rsa-checksum.h> #endif struct checksum_algo { const char *name; diff --git a/include/initcall.h b/include/initcall.h index 2378077361..65f67dca83 100644 --- a/include/initcall.h +++ b/include/initcall.h @@ -6,4 +6,4 @@ typedef int (*init_fnc_t)(void); -int initcall_run_list(init_fnc_t init_sequence[]); +int initcall_run_list(const init_fnc_t init_sequence[]); diff --git a/include/iotrace.h b/include/iotrace.h new file mode 100644 index 0000000000..9bd1f167ab --- /dev/null +++ b/include/iotrace.h @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2014 Google, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IOTRACE_H +#define __IOTRACE_H + +#include <linux/types.h> + +/* + * This file is designed to be included in arch/<arch>/include/asm/io.h. + * It redirects all IO access through a tracing/checksumming feature for + * testing purposes. + */ + +#if defined(CONFIG_IO_TRACE) && !defined(IOTRACE_IMPL) && \ + !defined(CONFIG_SPL_BUILD) + +#undef readl +#define readl(addr) iotrace_readl((const void *)(addr)) + +#undef writel +#define writel(val, addr) iotrace_writel(val, (const void *)(addr)) + +#undef readw +#define readw(addr) iotrace_readw((const void *)(addr)) + +#undef writew +#define writew(val, addr) iotrace_writew(val, (const void *)(addr)) + +#undef readb +#define readb(addr) iotrace_readb((const void *)(addr)) + +#undef writeb +#define writeb(val, addr) iotrace_writeb(val, (const void *)(addr)) + +#endif + +/* Tracing functions which mirror their io.h counterparts */ +u32 iotrace_readl(const void *ptr); +void iotrace_writel(ulong value, const void *ptr); +u16 iotrace_readw(const void *ptr); +void iotrace_writew(ulong value, const void *ptr); +u8 iotrace_readb(const void *ptr); +void iotrace_writeb(ulong value, const void *ptr); + +/** + * iotrace_reset_checksum() - Reset the iotrace checksum + */ +void iotrace_reset_checksum(void); + +/** + * iotrace_get_checksum() - Get the current checksum value + * + * @return currect checksum value + */ +u32 iotrace_get_checksum(void); + +/** + * iotrace_set_enabled() - Set whether iotracing is enabled or not + * + * This controls whether the checksum is updated and a trace record added + * for each I/O access. + * + * @enable: true to enable iotracing, false to disable + */ +void iotrace_set_enabled(int enable); + +/** + * iotrace_get_enabled() - Get whether iotracing is enabled or not + * + * @return true if enabled, false if disabled + */ +int iotrace_get_enabled(void); + +/** + * iotrace_set_buffer() - Set position and size of iotrace buffer + * + * Defines where the iotrace buffer goes, and resets the output pointer to + * the start of the buffer. + * + * The buffer can be 0 size in which case the checksum is updated but no + * trace records are writen. If the buffer is exhausted, the offset will + * continue to increase but not new data will be written. + * + * @start: Start address of buffer + * @size: Size of buffer in bytes + */ +void iotrace_set_buffer(ulong start, ulong size); + +/** + * iotrace_get_buffer() - Get buffer information + * + * @start: Returns start address of buffer + * @size: Returns size of buffer in bytes + * @offset: Returns the byte offset where the next output trace record will + * @count: Returns the number of trace records recorded + * be written (or would be if the buffer was large enough) + */ +void iotrace_get_buffer(ulong *start, ulong *size, ulong *offset, ulong *count); + +#endif /* __IOTRACE_H */ diff --git a/include/lcd.h b/include/lcd.h index 5f84cd3c5b..cc2ee3f956 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -258,10 +258,6 @@ extern vidinfo_t panel_info; /* Video functions */ -#if defined(CONFIG_RBC823) -void lcd_disable(void); -#endif - void lcd_putc(const char c); void lcd_puts(const char *s); void lcd_printf(const char *fmt, ...); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 0546565593..991bd8e63e 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -719,4 +719,23 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) } #endif +/** + * Check if the opcode's address should be sent only on the lower 8 bits + * @command: opcode to check + */ +static inline int nand_opcode_8bits(unsigned int command) +{ + switch (command) { + case NAND_CMD_READID: + case NAND_CMD_PARAM: + case NAND_CMD_GET_FEATURES: + case NAND_CMD_SET_FEATURES: + return 1; + default: + break; + } + return 0; +} + + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/omap_elm.h b/include/linux/mtd/omap_elm.h index 45454eaf0f..b8096b02e3 100644 --- a/include/linux/mtd/omap_elm.h +++ b/include/linux/mtd/omap_elm.h @@ -24,6 +24,9 @@ #define ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK (0x100) #define ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK (0x1F) +#define ELM_MAX_CHANNELS 8 +#define ELM_MAX_ERROR_COUNT 16 + #ifndef __ASSEMBLY__ enum bch_level { @@ -43,7 +46,7 @@ struct syndrome { struct location { u32 location_status; /* 0x800 */ u8 res1[124]; /* 0x804 */ - u32 error_location_x[16]; /* 0x880.... */ + u32 error_location_x[ELM_MAX_ERROR_COUNT]; /* 0x880, 0x980, .. */ u8 res2[64]; /* 0x8c0 */ }; @@ -63,12 +66,12 @@ struct elm { u8 res2[92]; /* 0x024 */ u32 page_ctrl; /* 0x080 */ u8 res3[892]; /* 0x084 */ - struct syndrome syndrome_fragments[8]; /* 0x400 */ + struct syndrome syndrome_fragments[ELM_MAX_CHANNELS]; /* 0x400,0x420 */ u8 res4[512]; /* 0x600 */ - struct location error_location[8]; /* 0x800 */ + struct location error_location[ELM_MAX_CHANNELS]; /* 0x800,0x900 ... */ }; -int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, +int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count, u32 *error_locations); int elm_config(enum bch_level level); void elm_reset(void); diff --git a/include/linux/mtd/omap_gpmc.h b/include/linux/mtd/omap_gpmc.h index 22f6573969..9a8658257f 100644 --- a/include/linux/mtd/omap_gpmc.h +++ b/include/linux/mtd/omap_gpmc.h @@ -11,6 +11,7 @@ #define GPMC_BUF_EMPTY 0 #define GPMC_BUF_FULL 1 +#define GPMC_MAX_SECTORS 8 enum omap_ecc { /* 1-bit ECC calculation by Software, Error detection by Software */ @@ -26,6 +27,8 @@ enum omap_ecc { OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, /* 8-bit ECC calculation by GPMC, Error detection by ELM */ OMAP_ECC_BCH8_CODE_HW, + /* 16-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH16_CODE_HW, }; struct gpmc_cs { @@ -46,6 +49,10 @@ struct bch_res_0_3 { u32 bch_result_x[4]; }; +struct bch_res_4_6 { + u32 bch_result_x[3]; +}; + struct gpmc { u8 res1[0x10]; u32 sysconfig; /* 0x10 */ @@ -75,7 +82,9 @@ struct gpmc { u8 res7[12]; /* 0x224 */ u32 testmomde_ctrl; /* 0x230 */ u8 res8[12]; /* 0x234 */ - struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */ + struct bch_res_0_3 bch_result_0_3[GPMC_MAX_SECTORS]; /* 0x240,0x250, */ + u8 res9[16 * 4]; /* 0x2C0 - 0x2FF */ + struct bch_res_4_6 bch_result_4_6[GPMC_MAX_SECTORS]; /* 0x300,0x310, */ }; /* Used for board specific gpmc initialization */ diff --git a/include/mmc.h b/include/mmc.h index a3a100bd39..f46572e177 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -32,15 +32,13 @@ #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) -#define MMC_MODE_HS 0x001 -#define MMC_MODE_HS_52MHz 0x010 -#define MMC_MODE_4BIT 0x100 -#define MMC_MODE_8BIT 0x200 -#define MMC_MODE_SPI 0x400 -#define MMC_MODE_HC 0x800 - -#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT) -#define MMC_MODE_WIDTH_BITS_SHIFT 8 +#define MMC_MODE_HS (1 << 0) +#define MMC_MODE_HS_52MHz (1 << 1) +#define MMC_MODE_4BIT (1 << 2) +#define MMC_MODE_8BIT (1 << 3) +#define MMC_MODE_SPI (1 << 4) +#define MMC_MODE_HC (1 << 5) +#define MMC_MODE_DDR_52MHz (1 << 6) #define SD_DATA_4BIT 0x00040000 @@ -100,9 +98,6 @@ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 -#define MMC_HS_TIMING 0x00000100 -#define MMC_HS_52MHZ 0x2 - #define OCR_BUSY 0x80000000 #define OCR_HCS 0x40000000 #define OCR_VOLTAGE_MASK 0x007FFF80 @@ -178,10 +173,16 @@ #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) +#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) +#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ + | EXT_CSD_CARD_TYPE_DDR_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ +#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) diff --git a/include/mpc8260.h b/include/mpc8260.h index a8ae278799..9980c74b51 100644 --- a/include/mpc8260.h +++ b/include/mpc8260.h @@ -21,10 +21,6 @@ #if defined(CONFIG_MPC8272_FAMILY) #ifdef CONFIG_MPC8247 #define CPU_ID_STR "MPC8247" -#elif defined CONFIG_MPC8248 -#define CPU_ID_STR "MPC8248" -#elif defined CONFIG_MPC8271 -#define CPU_ID_STR "MPC8271" #else #define CPU_ID_STR "MPC8272" #endif diff --git a/include/part.h b/include/part.h index f2c8c641fa..a496a4ad4a 100644 --- a/include/part.h +++ b/include/part.h @@ -180,6 +180,17 @@ int test_part_amiga (block_dev_desc_t *dev_desc); #include <part_efi.h> /* disk/part_efi.c */ int get_partition_info_efi (block_dev_desc_t * dev_desc, int part, disk_partition_t *info); +/** + * get_partition_info_efi_by_name() - Find the specified GPT partition table entry + * + * @param dev_desc - block device descriptor + * @param gpt_name - the specified table entry name + * @param info - returns the disk partition info + * + * @return - '0' on match, '-1' on no match, otherwise error + */ +int get_partition_info_efi_by_name(block_dev_desc_t *dev_desc, + const char *name, disk_partition_t *info); void print_part_efi (block_dev_desc_t *dev_desc); int test_part_efi (block_dev_desc_t *dev_desc); diff --git a/include/pcmcia.h b/include/pcmcia.h index 952a67c17c..8aec2541b8 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -21,16 +21,7 @@ #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) - /* The RPX series use SLOT_B */ -#if defined(CONFIG_RPXLITE) -# define CONFIG_PCMCIA_SLOT_B -#elif defined(CONFIG_FADS) /* The FADS series are a mess */ -# if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821) -# define CONFIG_PCMCIA_SLOT_A -# else -# define CONFIG_PCMCIA_SLOT_B -# endif -#elif defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx) +#if defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx) # define CONFIG_PCMCIA_SLOT_B /* The TQM8xxL use SLOT_B */ #elif defined(CONFIG_SPD823TS) /* The SPD8xx use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B @@ -44,8 +35,6 @@ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ATC) /* The ATC use SLOT_A */ # define CONFIG_PCMCIA_SLOT_A -#elif defined(CONFIG_NETTA) -# define CONFIG_PCMCIA_SLOT_A #elif defined(CONFIG_UC100) /* The UC100 use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B #else diff --git a/include/power/max77693_pmic.h b/include/power/max77693_pmic.h index 616d051f17..3d59e5916e 100644 --- a/include/power/max77693_pmic.h +++ b/include/power/max77693_pmic.h @@ -10,8 +10,6 @@ #include <power/power_chrg.h> -enum {CHARGER_ENABLE, CHARGER_DISABLE}; - #define CHARGER_MIN_CURRENT 200 #define CHARGER_MAX_CURRENT 2000 diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h index 74c5d54387..728d60afa5 100644 --- a/include/power/max8997_pmic.h +++ b/include/power/max8997_pmic.h @@ -170,7 +170,6 @@ enum { #define SAFEOUT_3_30V 0x03 /* Charger */ -enum {CHARGER_ENABLE, CHARGER_DISABLE}; #define DETBAT (1 << 2) #define MBCICHFCSET (1 << 4) #define MBCHOSTEN (1 << 6) diff --git a/include/power/pmic.h b/include/power/pmic.h index 8f282dd2f2..a62e6c90a5 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -17,6 +17,11 @@ enum { I2C_PMIC, I2C_NUM, }; enum { PMIC_READ, PMIC_WRITE, }; enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; +enum { + PMIC_CHARGER_DISABLE, + PMIC_CHARGER_ENABLE, +}; + struct p_i2c { unsigned char addr; unsigned char *buf; diff --git a/include/power/tps65090_pmic.h b/include/power/tps65090_pmic.h new file mode 100644 index 0000000000..dcf99c956a --- /dev/null +++ b/include/power/tps65090_pmic.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TPS65090_PMIC_H_ +#define __TPS65090_PMIC_H_ + +/* I2C device address for TPS65090 PMU */ +#define TPS65090_I2C_ADDR 0x48 + +enum { + /* Status register fields */ + TPS65090_ST1_OTC = 1 << 0, + TPS65090_ST1_OCC = 1 << 1, + TPS65090_ST1_STATE_SHIFT = 4, + TPS65090_ST1_STATE_MASK = 0xf << TPS65090_ST1_STATE_SHIFT, +}; + +/** + * Enable FET + * + * @param fet_id FET ID, value between 1 and 7 + * @return 0 on success, non-0 on failure + */ +int tps65090_fet_enable(unsigned int fet_id); + +/** + * Disable FET + * + * @param fet_id FET ID, value between 1 and 7 + * @return 0 on success, non-0 on failure + */ +int tps65090_fet_disable(unsigned int fet_id); + +/** + * Is FET enabled? + * + * @param fet_id FET ID, value between 1 and 7 + * @return 1 enabled, 0 disabled, negative value on failure + */ +int tps65090_fet_is_enabled(unsigned int fet_id); + +/** + * Enable / disable the battery charger + * + * @param enable 0 to disable charging, non-zero to enable + */ +int tps65090_set_charge_enable(int enable); + +/** + * Check whether we have enabled battery charging + * + * @return 1 if enabled, 0 if disabled + */ +int tps65090_get_charging(void); + +/** + * Return the value of the status register + * + * @return status register value, or -1 on error + */ +int tps65090_get_status(void); + +/** + * Initialize the TPS65090 PMU. + * + * @return 0 on success, non-0 on failure + */ +int tps65090_init(void); + +#endif /* __TPS65090_PMIC_H_ */ diff --git a/include/power/tps65218.h b/include/power/tps65218.h new file mode 100644 index 0000000000..67aa2f8c8d --- /dev/null +++ b/include/power/tps65218.h @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2014 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __POWER_TPS65218_H__ +#define __POWER_TPS65218_H__ + +/* I2C chip address */ +#define TPS65218_CHIP_PM 0x24 + +/* Registers */ +enum { + TPS65218_CHIPID = 0x00, + TPS65218_INT1, + TPS65218_INT2, + TPS65218_INT_MASK1, + TPS65218_INT_MASK2, + TPS65218_STATUS, + TPS65218_CONTROL, + TPS65218_FLAG, + TPS65218_PASSWORD = 0x10, + TPS65218_ENABLE1, + TPS65218_ENABLE2, + TPS65218_CONFIG1, + TPS65218_CONFIG2, + TPS65218_CONFIG3, + TPS65218_DCDC1, + TPS65218_DCDC2, + TPS65218_DCDC3, + TPS65218_DCDC4, + TPS65218_SLEW, + TPS65218_LDO1, + TPS65218_SEQ1 = 0x20, + TPS65218_SEQ2, + TPS65218_SEQ3, + TPS65218_SEQ4, + TPS65218_SEQ5, + TPS65218_SEQ6, + TPS65218_SEQ7, + TPS65218_PMIC_NUM_OF_REGS, +}; + +#define TPS65218_PROT_LEVEL_NONE 0x00 +#define TPS65218_PROT_LEVEL_1 0x01 +#define TPS65218_PROT_LEVEL_2 0x02 + +#define TPS65218_PASSWORD_LOCK_FOR_WRITE 0x00 +#define TPS65218_PASSWORD_UNLOCK 0x7D + +#define TPS65218_DCDC_GO 0x80 + +#define TPS65218_MASK_ALL_BITS 0xFF + +#define TPS65218_DCDC_VOLT_SEL_1100MV 0x19 +#define TPS65218_DCDC_VOLT_SEL_1330MV 0x30 + +int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val, + uchar mask); +int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel); +#endif /* __POWER_TPS65218_H__ */ diff --git a/include/status_led.h b/include/status_led.h index ecff60d59f..0eb91b8695 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -231,28 +231,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** RBC823 ********************************************************/ -#elif defined(CONFIG_RBC823) - -# define STATUS_LED_PAR im_ioport.iop_pcpar -# define STATUS_LED_DIR im_ioport.iop_pcdir -# undef STATUS_LED_ODR -# define STATUS_LED_DAT im_ioport.iop_pcdat - -# define STATUS_LED_BIT 0x0002 /* LED 0 is on PC.14 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING -# define STATUS_LED_BIT1 0x0004 /* LED 1 is on PC.13 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -/***** NetPhone ********************************************************/ -#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) -/* XXX empty just to avoid the error */ /***** STx XTc ********************************************************/ #elif defined(CONFIG_STXXTC) /* XXX empty just to avoid the error */ diff --git a/include/tps6586x.h b/include/tps6586x.h index 10ca103895..78ce428767 100644 --- a/include/tps6586x.h +++ b/include/tps6586x.h @@ -5,7 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __H_ +#ifndef _TPS6586X_H_ #define _TPS6586X_H_ enum { diff --git a/include/rsa-checksum.h b/include/u-boot/rsa-checksum.h index 612db85fe0..c996fb3e4c 100644 --- a/include/rsa-checksum.h +++ b/include/u-boot/rsa-checksum.h @@ -9,8 +9,8 @@ #include <errno.h> #include <image.h> -#include <sha1.h> -#include <sha256.h> +#include <u-boot/sha1.h> +#include <u-boot/sha256.h> extern const uint8_t padding_sha256_rsa4096[]; extern const uint8_t padding_sha256_rsa2048[]; diff --git a/include/rsa.h b/include/u-boot/rsa.h index a5680ab88c..325751ab7e 100644 --- a/include/rsa.h +++ b/include/u-boot/rsa.h @@ -60,7 +60,8 @@ int rsa_sign(struct image_sign_info *info, * * @info: Specifies key and FIT information * @keydest: Destination FDT blob for public key data - * @return: 0, on success, -ve on error + * @return: 0, on success, -ENOSPC if the keydest FDT blob ran out of space, + other -ve value on error */ int rsa_add_verify_data(struct image_sign_info *info, void *keydest); #else diff --git a/include/sha1.h b/include/u-boot/sha1.h index da09dab976..da09dab976 100644 --- a/include/sha1.h +++ b/include/u-boot/sha1.h diff --git a/include/sha256.h b/include/u-boot/sha256.h index beadab35ff..beadab35ff 100644 --- a/include/sha256.h +++ b/include/u-boot/sha256.h |