diff options
| author | Mario Six <mario.six@gdsys.cc> | 2019-01-21 09:17:58 +0100 |
|---|---|---|
| committer | Mario Six <mario.six@gdsys.cc> | 2019-05-21 07:52:33 +0200 |
| commit | 9c5df7a2a9f72ee397a67c2f19476566a35d7c18 (patch) | |
| tree | 3d93af511fb2792737f7b45dbdac6d97b3757da3 /include | |
| parent | 30915ab95d9a95328623010390d94da1325529f9 (diff) | |
| download | u-boot-9c5df7a2a9f72ee397a67c2f19476566a35d7c18.tar.gz | |
mpc83xx: Migrate LBLAW_* to Kconfig
The LBLAW_* values determine the window configuration of the memory
controller. Hence, they must be known at compile time, and cannot be
implemented in the DT mechanism.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Diffstat (limited to 'include')
30 files changed, 0 insertions, 300 deletions
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index dc7a8b8aa8..1953d18e87 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -176,9 +176,6 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -218,9 +215,6 @@ | OR_FCM_EHTR) /* 0xFFFF8396 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - #ifdef CONFIG_VSC7385_ENET #define CONFIG_TSEC2 /* VSC7385 Base address on CS2 */ @@ -239,10 +233,6 @@ | OR_GPCM_TRLX_SET \ | OR_GPCM_EHTR_SET) /* 0xFFFE09FF */ -/* Access window base at VSC7385 base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -/* Access window size 128K */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 #define CONFIG_VSC7385_IMAGE_SIZE 8192 diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h index 596d39ee5e..79c7f12bae 100644 --- a/include/configs/MPC8313ERDB_NAND.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -180,10 +180,6 @@ | OR_GPCM_EHTR \ | OR_GPCM_EAD) /* 0xFF006FF7 TODO SLOW 16 MB flash size */ - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE - /* 16 MB window size */ -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ @@ -253,12 +249,6 @@ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - /* local bus write LED / read status buffer (BCSR) mapping */ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ @@ -277,9 +267,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xFFFF8FF7 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_BCSR_ADDR -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - /* Vitesse 7385 */ #ifdef CONFIG_VSC7385_ENET @@ -301,11 +288,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xFFFE09FF */ - - /* Access window base at VSC7385 base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) - #endif #define CONFIG_MPC83XX_GPIO 1 diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h index 9d1ce200ec..1b2bba96d3 100644 --- a/include/configs/MPC8313ERDB_NOR.h +++ b/include/configs/MPC8313ERDB_NOR.h @@ -153,10 +153,6 @@ | OR_GPCM_EHTR \ | OR_GPCM_EAD) /* 0xFF006FF7 TODO SLOW 16 MB flash size */ - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE - /* 16 MB window size */ -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ @@ -222,12 +218,6 @@ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - /* local bus write LED / read status buffer (BCSR) mapping */ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ @@ -246,9 +236,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xFFFF8FF7 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_BCSR_ADDR -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - /* Vitesse 7385 */ #ifdef CONFIG_VSC7385_ENET @@ -270,11 +257,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xFFFE09FF */ - - /* Access window base at VSC7385 base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) - #endif #define CONFIG_MPC83XX_GPIO 1 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index fb568efe2d..86491b41d6 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -146,10 +146,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -213,12 +209,6 @@ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \ !defined(CONFIG_NAND_SPL) #define CONFIG_SYS_RAMBOOT diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 489e7c3368..cb17c7644d 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -141,9 +141,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 15fca456cc..d51d5ce06d 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -133,10 +133,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -162,8 +158,6 @@ */ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ | BR_PS_8 \ @@ -185,8 +179,6 @@ /* PIB window base 0xF8008000 */ #define CONFIG_SYS_PIB_BASE 0xF8008000 #define CONFIG_SYS_PIB_WINDOW_SIZE (32 * 1024) -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PIB_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) /* * CS2 on Local Bus, to PIB diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index e4d90589e9..06017a81bc 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -137,10 +137,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -161,8 +157,6 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ | BR_PS_8 \ | BR_MS_GPCM \ diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h index a24a2011d2..708a21f164 100644 --- a/include/configs/MPC8349EMDS_SDRAM.h +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -137,10 +137,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -161,8 +157,6 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ | BR_PS_8 \ | BR_MS_GPCM \ @@ -222,8 +216,6 @@ | BR_MS_SDRAM /* MSEL = SDRAM */ \ | BR_V) /* Valid */ /* 0xF0001861 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index aeee6e0408..16d615dcc6 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -226,9 +226,6 @@ boards, we say we have two, but don't display a message if we find only one. */ | OR_GPCM_TRLX_SET \ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) - /* Vitesse 7385 */ #define CONFIG_SYS_VSC7385_BASE 0xF8000000 @@ -247,10 +244,6 @@ boards, we say we have two, but don't display a message if we find only one. */ | OR_GPCM_TRLX_SET \ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) - #endif /* LED */ @@ -281,9 +274,6 @@ boards, we say we have two, but don't display a message if we find only one. */ | BR_V) #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) - #endif /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 01a3a77e99..9d6dc767ef 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -162,10 +162,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -193,9 +189,6 @@ */ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ | BR_PS_8 \ | BR_MS_GPCM \ @@ -233,9 +226,6 @@ | OR_FCM_EHTR) /* 0xFFFF919E */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - /* * Serial Port */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 9a4eeb6390..a1de8acc5c 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -188,10 +188,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -226,9 +222,6 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - /* Vitesse 7385 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 @@ -249,11 +242,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xfffe09ff */ - - /* Access Base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) - #endif /* diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index c5a6203001..4479000d25 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -93,26 +93,15 @@ #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \ | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_1GB) - - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE - /* disable remaining mappings */ #define CONFIG_SYS_BR1_PRELIM 0x00000000 #define CONFIG_SYS_OR1_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWBAR1_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x00000000 #define CONFIG_SYS_BR2_PRELIM 0x00000000 #define CONFIG_SYS_OR2_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWBAR2_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x00000000 #define CONFIG_SYS_BR3_PRELIM 0x00000000 #define CONFIG_SYS_OR3_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWBAR3_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x00000000 /* * Monitor config diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h index f4ee222808..b355e56355 100644 --- a/include/configs/caddy2.h +++ b/include/configs/caddy2.h @@ -84,8 +84,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xffc06ff7 */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_4MB) #define CONFIG_SYS_WINDOW1_BASE 0xf0000000 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ @@ -96,8 +94,6 @@ #define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ | OR_GPCM_SETA) /* 0xfffc0208 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_WINDOW1_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index c8fabf9da5..d86de800db 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -170,9 +170,6 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -199,9 +196,6 @@ #define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ /* Window base at FPGA base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 120eb0a6b7..e930c65637 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -142,9 +142,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 #define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE |\ BR_PS_8 |\ BR_MS_GPCM |\ @@ -173,11 +170,6 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define NAND_CACHE_PAGES 64 -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - #define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) |\ (2<<BR_DECC_SHIFT) |\ BR_PS_8 |\ @@ -199,8 +191,6 @@ */ #define CONFIG_SYS_MRAM_BASE 0xE2000000 #define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_MRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* 128 Kb */ #define CONFIG_SYS_OR_TIMING_MRAM @@ -216,8 +206,6 @@ */ #define CONFIG_SYS_CPLD_BASE 0xE3000000 #define CONFIG_SYS_CPLD_SIZE 0x8000 -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CPLD_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E #define CONFIG_SYS_OR_TIMING_MRAM diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index a4a0fb222b..dcabac5666 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -108,9 +108,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -129,9 +126,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -353,10 +347,6 @@ #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 256 -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE - -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ - #define CONFIG_SYS_BR3_PRELIM (\ CONFIG_SYS_PAXE_BASE | \ (1 << BR_PS_SHIFT) | \ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index f6c7cfce43..1da8df3931 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -93,9 +93,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -114,9 +111,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -333,10 +327,6 @@ #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 256 -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE - -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ - #define CONFIG_SYS_BR3_PRELIM (\ CONFIG_SYS_PAXE_BASE | \ (1 << BR_PS_SHIFT) | \ diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h index 6ac36c0f92..e732c2ad02 100644 --- a/include/configs/kmopti2.h +++ b/include/configs/kmopti2.h @@ -113,9 +113,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -134,9 +131,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -367,11 +361,6 @@ /* * Configuration for C2 on the local bus */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_8 | \ BR_MS_GPCM | \ @@ -388,8 +377,6 @@ /* * Configuration for C3 on the local bus */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ BR_PS_16 | \ BR_MS_GPCM | \ diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h index 7ee9a914a4..42fbdbf947 100644 --- a/include/configs/kmsupx5.h +++ b/include/configs/kmsupx5.h @@ -113,9 +113,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -134,9 +131,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -365,11 +359,6 @@ /* * Configuration for C2 on the local bus */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_8 | \ BR_MS_GPCM | \ diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h index 53017faa1c..222eb72f8e 100644 --- a/include/configs/kmtegr1.h +++ b/include/configs/kmtegr1.h @@ -120,9 +120,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -141,9 +138,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -427,9 +421,6 @@ OR_GPCM_TRLX_CLEAR | \ OR_GPCM_EHTR_CLEAR) -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - /* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 #define CONFIG_UEC_ETH2 diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h index 8f2be980a0..e542158022 100644 --- a/include/configs/kmtepr2.h +++ b/include/configs/kmtepr2.h @@ -113,9 +113,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -134,9 +131,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -367,11 +361,6 @@ /* * Configuration for C2 on the local bus */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_8 | \ BR_MS_GPCM | \ @@ -388,8 +377,6 @@ /* * Configuration for C3 on the local bus */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ BR_PS_16 | \ BR_MS_GPCM | \ diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h index 172a28e850..3e2cc60f3e 100644 --- a/include/configs/kmvect1.h +++ b/include/configs/kmvect1.h @@ -112,9 +112,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -133,9 +130,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -409,9 +403,6 @@ /* * APP1 on the local bus CS2 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_16 | \ BR_MS_UPMA | \ @@ -431,10 +422,6 @@ #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ MxMR_WLFx_2X) - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - /* * QE UEC ethernet configuration */ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 1bca11bd6e..aa9710f9c2 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -180,9 +180,6 @@ #define CONFIG_SYS_FLASH_SIZE 64 /* FLASH size is 64M */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -217,9 +214,6 @@ | OR_GPCM_EHTR_SET) /* 0xFFFF8052 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_SJA1000_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - /* * CPLD on Local Bus */ @@ -233,9 +227,6 @@ | OR_GPCM_EHTR_SET) /* 0xFFFF8042 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_CPLD_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - /* * Serial Port */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 8179147bc2..edf76e5851 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -114,10 +114,6 @@ | OR_GPCM_EAD) /* 0xFF806FF7 */ - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ @@ -180,9 +176,6 @@ | BR_MS_SDRAM \ | BR_V) /* 0xF0001861 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * diff --git a/include/configs/strider.h b/include/configs/strider.h index a716096bed..3b0207488f 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -168,9 +168,6 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ @@ -197,9 +194,6 @@ #define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ /* Window base at FPGA base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ | BR_PS_16 /* 16 bit port */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index 6a4006ef6a..987b2d77cc 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -110,9 +110,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -131,9 +128,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -362,9 +356,6 @@ /* * APP1 on the local bus CS2 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_16 | \ BR_MS_UPMA | \ @@ -384,8 +375,4 @@ #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ MxMR_WLFx_2X) - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #endif /* __CONFIG_H */ diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h index 5bb74fd9ae..5fceac7ae1 100644 --- a/include/configs/tuge1.h +++ b/include/configs/tuge1.h @@ -113,9 +113,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -134,9 +131,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -365,11 +359,6 @@ /* * Configuration for C2 on the local bus */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_8 | \ BR_MS_GPCM | \ diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 49f77efa74..1b97d0fecb 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -113,9 +113,6 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ BR_PS_16 | /* 16 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -134,9 +131,6 @@ * PRIO1/PIGGY on the local bus CS1 */ /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ BR_PS_8 | /* 8 bit port size */ \ BR_MS_GPCM | /* MSEL = GPCM */ \ @@ -367,11 +361,6 @@ /* * Configuration for C2 on the local bus */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_8 | \ BR_MS_GPCM | \ @@ -388,11 +377,6 @@ /* * Configuration for C3 on the local bus */ -/* Access window base at PINC3 base */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ BR_PS_8 | \ BR_MS_GPCM | \ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 84d2c897d7..7dcc150f19 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -111,9 +111,6 @@ #define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */ @@ -186,12 +183,6 @@ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - /* CS2 NvRAM */ #define CONFIG_SYS_BR2_PRELIM (0x60000000 \ | BR_PS_8 \ diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 249783720c..ed02661f82 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -84,8 +84,6 @@ | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xf8006ff7 */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) #define CONFIG_SYS_WINDOW1_BASE 0xf0000000 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ @@ -96,8 +94,6 @@ #define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ | OR_GPCM_SETA) /* 0xfffc0208 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_WINDOW1_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ |