Merge tag 'xilinx-for-v2020.01-part2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01 part 2

common:
- Fix manual relocation for repeatable commands

arm:
- Also clean up generated dtbos

microblaze:
- Add support for Manual relocation in crypto framework
- Tune and align architecture bootm support

zynq:
- DT sync ups
- Some defconfig updates
- Remove empty board_early_init_f()

zynqmp:
- Clean firmware handing via drivers/firmware/
- DT/defconfig name alignments
- DT cleanups with using firmware based clock driver
- Some defconfig updates
- Add IIO ina226 DT description
- Tune zynqmp_psu_init_minimalize.sh script
- Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216

versal:
- Clean firmware handing via drivers/firmware/
- Add gpio support
- Enable DT overlay/USB/CLK/FPGA
- DT updates
- Tune mini configuration

spi:
- gqspi - Remove unused headers

5 files changed, 346 insertions, 5 deletions

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b6c9f2c8dd..274cc19112 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -227,8 +227,6 @@
 /* Boot FreeBSD/vxWorks from an ELF image */
 #define CONFIG_SYS_MMC_MAX_DEVICE	1
 
-#undef CONFIG_BOOTM_NETBSD
-
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
diff --git a/include/dt-bindings/clock/xlnx-zynqmp-clk.h b/include/dt-bindings/clock/xlnx-zynqmp-clk.h
new file mode 100644
index 0000000000..cdc4c0b9a3
--- /dev/null
+++ b/include/dt-bindings/clock/xlnx-zynqmp-clk.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ *  Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ */
+
+#ifndef _DT_BINDINGS_CLK_ZYNQMP_H
+#define _DT_BINDINGS_CLK_ZYNQMP_H
+
+#define IOPLL			0
+#define RPLL			1
+#define APLL			2
+#define DPLL			3
+#define VPLL			4
+#define IOPLL_TO_FPD		5
+#define RPLL_TO_FPD		6
+#define APLL_TO_LPD		7
+#define DPLL_TO_LPD		8
+#define VPLL_TO_LPD		9
+#define ACPU			10
+#define ACPU_HALF		11
+#define DBF_FPD			12
+#define DBF_LPD			13
+#define DBG_TRACE		14
+#define DBG_TSTMP		15
+#define DP_VIDEO_REF		16
+#define DP_AUDIO_REF		17
+#define DP_STC_REF		18
+#define GDMA_REF		19
+#define DPDMA_REF		20
+#define DDR_REF			21
+#define SATA_REF		22
+#define PCIE_REF		23
+#define GPU_REF			24
+#define GPU_PP0_REF		25
+#define GPU_PP1_REF		26
+#define TOPSW_MAIN		27
+#define TOPSW_LSBUS		28
+#define GTGREF0_REF		29
+#define LPD_SWITCH		30
+#define LPD_LSBUS		31
+#define USB0_BUS_REF		32
+#define USB1_BUS_REF		33
+#define USB3_DUAL_REF		34
+#define USB0			35
+#define USB1			36
+#define CPU_R5			37
+#define CPU_R5_CORE		38
+#define CSU_SPB			39
+#define CSU_PLL			40
+#define PCAP			41
+#define IOU_SWITCH		42
+#define GEM_TSU_REF		43
+#define GEM_TSU			44
+#define GEM0_TX			45
+#define GEM1_TX			46
+#define GEM2_TX			47
+#define GEM3_TX			48
+#define GEM0_RX			49
+#define GEM1_RX			50
+#define GEM2_RX			51
+#define GEM3_RX			52
+#define QSPI_REF		53
+#define SDIO0_REF		54
+#define SDIO1_REF		55
+#define UART0_REF		56
+#define UART1_REF		57
+#define SPI0_REF		58
+#define SPI1_REF		59
+#define NAND_REF		60
+#define I2C0_REF		61
+#define I2C1_REF		62
+#define CAN0_REF		63
+#define CAN1_REF		64
+#define CAN0			65
+#define CAN1			66
+#define DLL_REF			67
+#define ADMA_REF		68
+#define TIMESTAMP_REF		69
+#define AMS_REF			70
+#define PL0_REF			71
+#define PL1_REF			72
+#define PL2_REF			73
+#define PL3_REF			74
+#define WDT			75
+#define IOPLL_INT		76
+#define IOPLL_PRE_SRC		77
+#define IOPLL_HALF		78
+#define IOPLL_INT_MUX		79
+#define IOPLL_POST_SRC		80
+#define RPLL_INT		81
+#define RPLL_PRE_SRC		82
+#define RPLL_HALF		83
+#define RPLL_INT_MUX		84
+#define RPLL_POST_SRC		85
+#define APLL_INT		86
+#define APLL_PRE_SRC		87
+#define APLL_HALF		88
+#define APLL_INT_MUX		89
+#define APLL_POST_SRC		90
+#define DPLL_INT		91
+#define DPLL_PRE_SRC		92
+#define DPLL_HALF		93
+#define DPLL_INT_MUX		94
+#define DPLL_POST_SRC		95
+#define VPLL_INT		96
+#define VPLL_PRE_SRC		97
+#define VPLL_HALF		98
+#define VPLL_INT_MUX		99
+#define VPLL_POST_SRC		100
+#define CAN0_MIO		101
+#define CAN1_MIO		102
+#define ACPU_FULL		103
+#define GEM0_REF		104
+#define GEM1_REF		105
+#define GEM2_REF		106
+#define GEM3_REF		107
+#define GEM0_REF_UNG		108
+#define GEM1_REF_UNG		109
+#define GEM2_REF_UNG		110
+#define GEM3_REF_UNG		111
+#define LPD_WDT			112
+
+#endif
diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
new file mode 100644
index 0000000000..0d9a412fd5
--- /dev/null
+++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_POWER_H
+#define _DT_BINDINGS_ZYNQMP_POWER_H
+
+#define		PD_USB_0	22
+#define		PD_USB_1	23
+#define		PD_TTC_0	24
+#define		PD_TTC_1	25
+#define		PD_TTC_2	26
+#define		PD_TTC_3	27
+#define		PD_SATA		28
+#define		PD_ETH_0	29
+#define		PD_ETH_1	30
+#define		PD_ETH_2	31
+#define		PD_ETH_3	32
+#define		PD_UART_0	33
+#define		PD_UART_1	34
+#define		PD_SPI_0	35
+#define		PD_SPI_1	36
+#define		PD_I2C_0	37
+#define		PD_I2C_1	38
+#define		PD_SD_0		39
+#define		PD_SD_1		40
+#define		PD_DP		41
+#define		PD_GDMA		42
+#define		PD_ADMA		43
+#define		PD_NAND		44
+#define		PD_QSPI		45
+#define		PD_GPIO		46
+#define		PD_CAN_0	47
+#define		PD_CAN_1	48
+#define		PD_GPU		58
+#define		PD_PCIE		59
+
+#endif
diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
new file mode 100644
index 0000000000..d44525b9f8
--- /dev/null
+++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H
+#define _DT_BINDINGS_ZYNQMP_RESETS_H
+
+#define		ZYNQMP_RESET_PCIE_CFG		0
+#define		ZYNQMP_RESET_PCIE_BRIDGE	1
+#define		ZYNQMP_RESET_PCIE_CTRL		2
+#define		ZYNQMP_RESET_DP			3
+#define		ZYNQMP_RESET_SWDT_CRF		4
+#define		ZYNQMP_RESET_AFI_FM5		5
+#define		ZYNQMP_RESET_AFI_FM4		6
+#define		ZYNQMP_RESET_AFI_FM3		7
+#define		ZYNQMP_RESET_AFI_FM2		8
+#define		ZYNQMP_RESET_AFI_FM1		9
+#define		ZYNQMP_RESET_AFI_FM0		10
+#define		ZYNQMP_RESET_GDMA		11
+#define		ZYNQMP_RESET_GPU_PP1		12
+#define		ZYNQMP_RESET_GPU_PP0		13
+#define		ZYNQMP_RESET_GPU		14
+#define		ZYNQMP_RESET_GT			15
+#define		ZYNQMP_RESET_SATA		16
+#define		ZYNQMP_RESET_ACPU3_PWRON	17
+#define		ZYNQMP_RESET_ACPU2_PWRON	18
+#define		ZYNQMP_RESET_ACPU1_PWRON	19
+#define		ZYNQMP_RESET_ACPU0_PWRON	20
+#define		ZYNQMP_RESET_APU_L2		21
+#define		ZYNQMP_RESET_ACPU3		22
+#define		ZYNQMP_RESET_ACPU2		23
+#define		ZYNQMP_RESET_ACPU1		24
+#define		ZYNQMP_RESET_ACPU0		25
+#define		ZYNQMP_RESET_DDR		26
+#define		ZYNQMP_RESET_APM_FPD		27
+#define		ZYNQMP_RESET_SOFT		28
+#define		ZYNQMP_RESET_GEM0		29
+#define		ZYNQMP_RESET_GEM1		30
+#define		ZYNQMP_RESET_GEM2		31
+#define		ZYNQMP_RESET_GEM3		32
+#define		ZYNQMP_RESET_QSPI		33
+#define		ZYNQMP_RESET_UART0		34
+#define		ZYNQMP_RESET_UART1		35
+#define		ZYNQMP_RESET_SPI0		36
+#define		ZYNQMP_RESET_SPI1		37
+#define		ZYNQMP_RESET_SDIO0		38
+#define		ZYNQMP_RESET_SDIO1		39
+#define		ZYNQMP_RESET_CAN0		40
+#define		ZYNQMP_RESET_CAN1		41
+#define		ZYNQMP_RESET_I2C0		42
+#define		ZYNQMP_RESET_I2C1		43
+#define		ZYNQMP_RESET_TTC0		44
+#define		ZYNQMP_RESET_TTC1		45
+#define		ZYNQMP_RESET_TTC2		46
+#define		ZYNQMP_RESET_TTC3		47
+#define		ZYNQMP_RESET_SWDT_CRL		48
+#define		ZYNQMP_RESET_NAND		49
+#define		ZYNQMP_RESET_ADMA		50
+#define		ZYNQMP_RESET_GPIO		51
+#define		ZYNQMP_RESET_IOU_CC		52
+#define		ZYNQMP_RESET_TIMESTAMP		53
+#define		ZYNQMP_RESET_RPU_R50		54
+#define		ZYNQMP_RESET_RPU_R51		55
+#define		ZYNQMP_RESET_RPU_AMBA		56
+#define		ZYNQMP_RESET_OCM		57
+#define		ZYNQMP_RESET_RPU_PGE		58
+#define		ZYNQMP_RESET_USB0_CORERESET	59
+#define		ZYNQMP_RESET_USB1_CORERESET	60
+#define		ZYNQMP_RESET_USB0_HIBERRESET	61
+#define		ZYNQMP_RESET_USB1_HIBERRESET	62
+#define		ZYNQMP_RESET_USB0_APB		63
+#define		ZYNQMP_RESET_USB1_APB		64
+#define		ZYNQMP_RESET_IPI		65
+#define		ZYNQMP_RESET_APM_LPD		66
+#define		ZYNQMP_RESET_RTC		67
+#define		ZYNQMP_RESET_SYSMON		68
+#define		ZYNQMP_RESET_AFI_FM6		69
+#define		ZYNQMP_RESET_LPD_SWDT		70
+#define		ZYNQMP_RESET_FPD		71
+#define		ZYNQMP_RESET_RPU_DBG1		72
+#define		ZYNQMP_RESET_RPU_DBG0		73
+#define		ZYNQMP_RESET_DBG_LPD		74
+#define		ZYNQMP_RESET_DBG_FPD		75
+#define		ZYNQMP_RESET_APLL		76
+#define		ZYNQMP_RESET_DPLL		77
+#define		ZYNQMP_RESET_VPLL		78
+#define		ZYNQMP_RESET_IOPLL		79
+#define		ZYNQMP_RESET_RPLL		80
+#define		ZYNQMP_RESET_GPO3_PL_0		81
+#define		ZYNQMP_RESET_GPO3_PL_1		82
+#define		ZYNQMP_RESET_GPO3_PL_2		83
+#define		ZYNQMP_RESET_GPO3_PL_3		84
+#define		ZYNQMP_RESET_GPO3_PL_4		85
+#define		ZYNQMP_RESET_GPO3_PL_5		86
+#define		ZYNQMP_RESET_GPO3_PL_6		87
+#define		ZYNQMP_RESET_GPO3_PL_7		88
+#define		ZYNQMP_RESET_GPO3_PL_8		89
+#define		ZYNQMP_RESET_GPO3_PL_9		90
+#define		ZYNQMP_RESET_GPO3_PL_10		91
+#define		ZYNQMP_RESET_GPO3_PL_11		92
+#define		ZYNQMP_RESET_GPO3_PL_12		93
+#define		ZYNQMP_RESET_GPO3_PL_13		94
+#define		ZYNQMP_RESET_GPO3_PL_14		95
+#define		ZYNQMP_RESET_GPO3_PL_15		96
+#define		ZYNQMP_RESET_GPO3_PL_16		97
+#define		ZYNQMP_RESET_GPO3_PL_17		98
+#define		ZYNQMP_RESET_GPO3_PL_18		99
+#define		ZYNQMP_RESET_GPO3_PL_19		100
+#define		ZYNQMP_RESET_GPO3_PL_20		101
+#define		ZYNQMP_RESET_GPO3_PL_21		102
+#define		ZYNQMP_RESET_GPO3_PL_22		103
+#define		ZYNQMP_RESET_GPO3_PL_23		104
+#define		ZYNQMP_RESET_GPO3_PL_24		105
+#define		ZYNQMP_RESET_GPO3_PL_25		106
+#define		ZYNQMP_RESET_GPO3_PL_26		107
+#define		ZYNQMP_RESET_GPO3_PL_27		108
+#define		ZYNQMP_RESET_GPO3_PL_28		109
+#define		ZYNQMP_RESET_GPO3_PL_29		110
+#define		ZYNQMP_RESET_GPO3_PL_30		111
+#define		ZYNQMP_RESET_GPO3_PL_31		112
+#define		ZYNQMP_RESET_RPU_LS		113
+#define		ZYNQMP_RESET_PS_ONLY		114
+#define		ZYNQMP_RESET_PL			115
+#define		ZYNQMP_RESET_PS_PL0		116
+#define		ZYNQMP_RESET_PS_PL1		117
+#define		ZYNQMP_RESET_PS_PL2		118
+#define		ZYNQMP_RESET_PS_PL3		119
+
+#endif
diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h
index a20cbcdb86..93d771ece2 100644
--- a/include/zynqmp_firmware.h
+++ b/include/zynqmp_firmware.h
@@ -11,12 +11,58 @@
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
 	PM_SET_CONFIGURATION,
-	PM_SECURE_IMAGE = 45,
+	PM_GET_NODE_STATUS,
+	PM_GET_OPERATING_CHARACTERISTIC,
+	PM_REGISTER_NOTIFIER,
+	PM_REQUEST_SUSPEND,
+	PM_SELF_SUSPEND,
+	PM_FORCE_POWERDOWN,
+	PM_ABORT_SUSPEND,
+	PM_REQUEST_WAKEUP,
+	PM_SET_WAKEUP_SOURCE,
+	PM_SYSTEM_SHUTDOWN,
+	PM_REQUEST_NODE,
+	PM_RELEASE_NODE,
+	PM_SET_REQUIREMENT,
+	PM_SET_MAX_LATENCY,
+	PM_RESET_ASSERT,
+	PM_RESET_GET_STATUS,
+	PM_MMIO_WRITE,
+	PM_MMIO_READ,
+	PM_PM_INIT_FINALIZE,
+	PM_FPGA_LOAD,
+	PM_FPGA_GET_STATUS,
+	PM_GET_CHIPID,
+	PM_SECURE_SHA = 26,
+	PM_SECURE_RSA,
+	PM_PINCTRL_REQUEST,
+	PM_PINCTRL_RELEASE,
+	PM_PINCTRL_GET_FUNCTION,
+	PM_PINCTRL_SET_FUNCTION,
+	PM_PINCTRL_CONFIG_PARAM_GET,
+	PM_PINCTRL_CONFIG_PARAM_SET,
+	PM_IOCTL,
+	PM_QUERY_DATA,
+	PM_CLOCK_ENABLE,
+	PM_CLOCK_DISABLE,
+	PM_CLOCK_GETSTATE,
+	PM_CLOCK_SETDIVIDER,
+	PM_CLOCK_GETDIVIDER,
+	PM_CLOCK_SETRATE,
+	PM_CLOCK_GETRATE,
+	PM_CLOCK_SETPARENT,
+	PM_CLOCK_GETPARENT,
+	PM_SECURE_IMAGE,
+	PM_FPGA_READ = 46,
+	PM_SECURE_AES,
+	PM_CLOCK_PLL_GETPARAM = 49,
+	PM_REGISTER_ACCESS = 52,
+	PM_EFUSE_ACCESS,
+	PM_FEATURE_CHECK = 63,
+	PM_API_MAX,
 };
 
 #define PM_SIP_SVC      0xc2000000
-#define ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD       \
-	(PM_SIP_SVC + PM_SECURE_IMAGE)
 
 #define ZYNQMP_PM_VERSION_MAJOR         1
 #define ZYNQMP_PM_VERSION_MINOR         0
@@ -33,5 +79,7 @@ enum pm_api_id {
 
 unsigned int zynqmp_firmware_version(void);
 void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size);
+int xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
+		      u32 arg3, u32 *ret_payload);
 
 #endif /* _ZYNQMP_FIRMWARE_H_ */