arm: Remove VCMA9 board

This board has not been converted to DM_SERIAL by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jagan Teki <jagan@openedev.com>

1 files changed, 0 insertions, 205 deletions

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
deleted file mode 100644
index bb26261ab5..0000000000
--- a/include/configs/VCMA9.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2002, 2003
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Configuation settings for the MPL VCMA9 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define MACH_TYPE_MPL_VCMA9	227
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_THUMB_BUILD
-
-#define CONFIG_S3C24X0		/* This is a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410		/* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_VCMA9		/* on a MPL VCMA9 Board  */
-#define CONFIG_MACH_TYPE	MACH_TYPE_MPL_VCMA9 /* Machine type */
-
-#define CONFIG_SYS_TEXT_BASE	0x0
-
-#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
-
-/* input clock of PLL (VCMA9 has 12MHz input clock) */
-#define CONFIG_SYS_CLK_FREQ	12000000
-
-#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_NAND
-
-#define CONFIG_BOARD_LATE_INIT
-
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * I2C stuff:
- * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
- * address 0x50 with 16bit addressing
- */
-#define CONFIG_SYS_I2C
-
-/* we use the built-in I2C controller */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED    100000	/* I2C speed */
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x7F	/* I2C slave addr */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-/* use EEPROM for environment vars */
-#define CONFIG_ENV_IS_IN_EEPROM		1
-/* environment starts at offset 0 */
-#define CONFIG_ENV_OFFSET		0x000
-/* 2KB should be more than enough */
-#define CONFIG_ENV_SIZE			0x800
-
-#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-/* 64 bytes page write mode on 24C256 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/*
- * Hardware drivers
- */
-#define CONFIG_CS8900			/* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE		0x20000300
-#define CONFIG_CS8900_BUS16
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1		1	/* we use SERIAL 1 on VCMA9 */
-
-/* USB support (currently only works with D-cache off) */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_OHCI_S3C24XX
-#define CONFIG_DOS_PARTITION
-
-/* Enable needed helper functions */
-
-/* RTC */
-#define CONFIG_RTC_S3C24X0
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE			9600
-
-#define CONFIG_BOOT_RETRY_TIME		-1
-#define CONFIG_RESET_TO_RETRY
-
-#define CONFIG_NETMASK			255.255.255.0
-#define CONFIG_IPADDR			10.0.0.110
-#define CONFIG_SERVERIP			10.0.0.1
-
-#if defined(CONFIG_CMD_KGDB)
-/* speed to run kgdb serial port */
-#define CONFIG_KGDB_BAUDRATE		115200
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_CBSIZE		256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x31FFFFFF	/* 32 MB in DRAM */
-
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_LOAD_ADDR		0x30800000
-
-/* we configure PWM Timer 4 to 1ms 1000Hz  */
-
-/* support additional compression methods */
-#define CONFIG_BZIP2
-#define CONFIG_LZO
-#define CONFIG_LZMA
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x30000000	/* SDRAM Bank #1 */
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE	PHYS_FLASH_1
-
-/* FLASH and environment organization */
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-#define CONFIG_FLASH_SHOW_PROGRESS	45
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT	(19)
-
-/*
- * Size of malloc() pool
- * BZIP2 / LZO / LZMA need a lot of RAM
- */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-/* NAND configuration */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_S3C2410_NAND_HWECC
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x4E000000
-#define CONFIG_S3C24XX_CUSTOM_NAND_TIMING
-#define CONFIG_S3C24XX_TACLS		1
-#define CONFIG_S3C24XX_TWRPH0		5
-#define CONFIG_S3C24XX_TWRPH1		3
-#endif
-
-#define MULTI_PURPOSE_SOCKET_ADDR	0x08000000
-
-/* File system */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_JFFS2
-#define CONFIG_YAFFS2
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-					GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#endif /* __CONFIG_H */