ARM: tegra: add Venice2 (Tegra124) board

These are the board files for Venice2 (Tegra124), plus the AS3722 PMIC
files. PMIC init will be moved to pmic_common_init later.

This builds/boots on Venice2, SPI/MMC/USB/I2C all work. Audio, display
and WB/LP0 are not supported yet.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 82 insertions, 0 deletions

diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
new file mode 100644
index 0000000000..32d5bc9c95
--- /dev/null
+++ b/include/configs/tegra124-common.h
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA124_COMMON_H_
+#define _TEGRA124_COMMON_H_
+
+#include "tegra-common.h"
+
+/* Cortex-A15 uses a cache line size of 64 bytes */
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_TEGRA124			/* is an NVIDIA Tegra124 core */
+
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR	0x80A00800	/* default */
+#define CONFIG_STACKBASE	0x82800000	/* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE	0x8010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"scriptaddr=0x90000000\0" \
+	"pxefile_addr_r=0x90100000\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"fdt_addr_r=0x82000000\0" \
+	"ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE		0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80090000
+#define CONFIG_SPL_STACK		0x800ffffc
+
+/* Total I2C ports on Tegra124 */
+#define TEGRA_I2C_NUM_CONTROLLERS	5
+
+/* For USB EHCI controller */
+#define CONFIG_EHCI_IS_TDI
+
+#endif /* _TEGRA124_COMMON_H_ */