83xx, uec: split enet_interface in two variables

There's no sensible reason to unite speed and interface type into
one variable.  So split this variable enet_interface into two
vars: enet_interface_type, which hold the interface type and speed.

Also: add the possibility for switching between 10 and 100 MBit
interfaces on the fly, when running in FAST_ETH mode.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

3 files changed, 131 insertions, 109 deletions

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index db95adaeef..27dc5009c8 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -323,9 +323,10 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
 	return 0;
 }
 
-static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
+static int uec_set_mac_if_mode(uec_private_t *uec,
+		enet_interface_type_e if_mode, int speed)
 {
-	enet_interface_e	enet_if_mode;
+	enet_interface_type_e	enet_if_mode;
 	uec_info_t		*uec_info;
 	uec_t			*uec_regs;
 	u32			upsmr;
@@ -346,52 +347,68 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 	upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
 	upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
 
-	switch (enet_if_mode) {
-		case ENET_100_MII:
-		case ENET_10_MII:
+	switch (speed) {
+		case 10:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+			switch (enet_if_mode) {
+				case MII:
+					break;
+				case RGMII:
+					upsmr |= (UPSMR_RPM | UPSMR_R10M);
+					break;
+				case RMII:
+					upsmr |= (UPSMR_R10M | UPSMR_RMM);
+					break;
+				default:
+					return -EINVAL;
+					break;
+			}
 			break;
-		case ENET_1000_GMII:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
-			break;
-		case ENET_1000_TBI:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
-			upsmr |= UPSMR_TBIM;
-			break;
-		case ENET_1000_RTBI:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
-			upsmr |= (UPSMR_RPM | UPSMR_TBIM);
-			break;
-		case ENET_1000_RGMII_RXID:
-		case ENET_1000_RGMII_ID:
-		case ENET_1000_RGMII:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
-			upsmr |= UPSMR_RPM;
-			break;
-		case ENET_100_RGMII:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
-			upsmr |= UPSMR_RPM;
-			break;
-		case ENET_10_RGMII:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
-			upsmr |= (UPSMR_RPM | UPSMR_R10M);
-			break;
-		case ENET_100_RMII:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
-			upsmr |= UPSMR_RMM;
-			break;
-		case ENET_10_RMII:
+		case 100:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
-			upsmr |= (UPSMR_R10M | UPSMR_RMM);
+			switch (enet_if_mode) {
+				case MII:
+					break;
+				case RGMII:
+					upsmr |= UPSMR_RPM;
+					break;
+				case RMII:
+					upsmr |= UPSMR_RMM;
+					break;
+				default:
+					return -EINVAL;
+					break;
+			}
 			break;
-		case ENET_1000_SGMII:
+		case 1000:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
-			upsmr |= UPSMR_SGMM;
+			switch (enet_if_mode) {
+				case GMII:
+					break;
+				case TBI:
+					upsmr |= UPSMR_TBIM;
+					break;
+				case RTBI:
+					upsmr |= (UPSMR_RPM | UPSMR_TBIM);
+					break;
+				case RGMII_RXID:
+				case RGMII_ID:
+				case RGMII:
+					upsmr |= UPSMR_RPM;
+					break;
+				case SGMII:
+					upsmr |= UPSMR_SGMM;
+					break;
+				default:
+					return -EINVAL;
+					break;
+			}
 			break;
 		default:
 			return -EINVAL;
 			break;
 	}
+
 	out_be32(&uec_regs->maccfg2, maccfg2);
 	out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
 
@@ -504,7 +521,7 @@ static void adjust_link(struct eth_device *dev)
 	struct uec_mii_info	*mii_info = uec->mii_info;
 
 	extern void change_phy_interface_mode(struct eth_device *dev,
-					 enet_interface_e mode);
+				 enet_interface_type_e mode, int speed);
 	uec_regs = uec->uec_regs;
 
 	if (mii_info->link) {
@@ -522,25 +539,19 @@ static void adjust_link(struct eth_device *dev)
 		}
 
 		if (mii_info->speed != uec->oldspeed) {
+			enet_interface_type_e	mode = \
+				uec->uec_info->enet_interface_type;
 			if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
 				switch (mii_info->speed) {
 				case 1000:
 					break;
 				case 100:
 					printf ("switching to rgmii 100\n");
-					/* change phy to rgmii 100 */
-					change_phy_interface_mode(dev,
-								ENET_100_RGMII);
-					/* change the MAC interface mode */
-					uec_set_mac_if_mode(uec,ENET_100_RGMII);
+					mode = RGMII;
 					break;
 				case 10:
 					printf ("switching to rgmii 10\n");
-					/* change phy to rgmii 10 */
-					change_phy_interface_mode(dev,
-								ENET_10_RGMII);
-					/* change the MAC interface mode */
-					uec_set_mac_if_mode(uec,ENET_10_RGMII);
+					mode = RGMII;
 					break;
 				default:
 					printf("%s: Ack,Speed(%d)is illegal\n",
@@ -549,6 +560,11 @@ static void adjust_link(struct eth_device *dev)
 				}
 			}
 
+			/* change phy */
+			change_phy_interface_mode(dev, mode, mii_info->speed);
+			/* change the MAC interface mode */
+			uec_set_mac_if_mode(uec, mode, mii_info->speed);
+
 			printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
 			uec->oldspeed = mii_info->speed;
 		}
@@ -980,7 +996,6 @@ static int uec_startup(uec_private_t *uec)
 	int				num_threads_tx;
 	int				num_threads_rx;
 	u32				utbipar;
-	enet_interface_e		enet_interface;
 	u32				length;
 	u32				align;
 	qe_bd_t				*bd;
@@ -1060,7 +1075,7 @@ static int uec_startup(uec_private_t *uec)
 	out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
 
 	/* Setup MAC interface mode */
-	uec_set_mac_if_mode(uec, uec_info->enet_interface);
+	uec_set_mac_if_mode(uec, uec_info->enet_interface_type, uec_info->speed);
 
 	/* Setup MII management base */
 #ifndef CONFIG_eTSEC_MDIO_BUS
@@ -1075,7 +1090,6 @@ static int uec_startup(uec_private_t *uec)
 	/* Setup UTBIPAR */
 	utbipar = in_be32(&uec_regs->utbipar);
 	utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
-	enet_interface = uec->uec_info->enet_interface;
 
 	/* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
 	 * This frees up the remaining SMI addresses for use.
@@ -1084,7 +1098,8 @@ static int uec_startup(uec_private_t *uec)
 	out_be32(&uec_regs->utbipar, utbipar);
 
 	/* Configure the TBI for SGMII operation */
-	if (uec->uec_info->enet_interface == ENET_1000_SGMII) {
+	if ((uec->uec_info->enet_interface_type == SGMII) &&
+	   (uec->uec_info->speed == 1000)) {
 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
 			ENET_TBI_MII_ANA, TBIANA_SETTINGS);
 
@@ -1215,6 +1230,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 		if (err || i <= 0)
 			printf("warning: %s: timeout on PHY link\n", dev->name);
 
+		adjust_link(dev);
 		uec->the_first_run = 1;
 	}
 
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index febfbcef53..2a9e2dcd9c 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -662,22 +662,18 @@ typedef enum uec_num_of_threads {
 
 /* UEC ethernet interface type
 */
-typedef enum enet_interface {
-	ENET_10_MII,
-	ENET_10_RMII,
-	ENET_10_RGMII,
-	ENET_100_MII,
-	ENET_100_RMII,
-	ENET_100_RGMII,
-	ENET_1000_GMII,
-	ENET_1000_RGMII,
-	ENET_1000_RGMII_ID,
-	ENET_1000_RGMII_RXID,
-	ENET_1000_RGMII_TXID,
-	ENET_1000_TBI,
-	ENET_1000_RTBI,
-	ENET_1000_SGMII
-} enet_interface_e;
+typedef enum enet_interface_type {
+	MII,
+	RMII,
+	RGMII,
+	GMII,
+	RGMII_ID,
+	RGMII_RXID,
+	RGMII_TXID,
+	TBI,
+	RTBI,
+	SGMII
+} enet_interface_type_e;
 
 /* UEC initialization info struct
 */
@@ -696,7 +692,8 @@ typedef enum enet_interface {
 	.tx_bd_ring_len		= 16,	\
 	.rx_bd_ring_len		= 16,	\
 	.phy_address		= CONFIG_SYS_UEC##num##_PHY_ADDR, \
-	.enet_interface		= CONFIG_SYS_UEC##num##_INTERFACE_MODE, \
+	.enet_interface_type	= CONFIG_SYS_UEC##num##_INTERFACE_TYPE, \
+	.speed			= CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \
 }
 
 typedef struct uec_info {
@@ -708,7 +705,8 @@ typedef struct uec_info {
 	u16				rx_bd_ring_len;
 	u16				tx_bd_ring_len;
 	u8				phy_address;
-	enet_interface_e		enet_interface;
+	enet_interface_type_e		enet_interface_type;
+	int				speed;
 } uec_info_t;
 
 /* UEC driver initialized info
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 9715183942..c4214d9a0a 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -401,7 +401,8 @@ static int bcm_init(struct uec_mii_info *mii_info)
 
 	gbit_config_aneg(mii_info);
 
-	if (uec->uec_info->enet_interface == ENET_1000_RGMII_RXID) {
+	if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
+	   (uec->uec_info->speed == 1000)) {
 		u16 val;
 		int cnt = 50;
 
@@ -429,20 +430,22 @@ static int marvell_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
 	uec_private_t *uec = edev->priv;
-	enum enet_interface iface = uec->uec_info->enet_interface;
+	enum enet_interface_type iface = uec->uec_info->enet_interface_type;
+	int	speed = uec->uec_info->speed;
 
-	if (iface == ENET_1000_RGMII_ID ||
-			iface == ENET_1000_RGMII_RXID ||
-			iface == ENET_1000_RGMII_TXID) {
+	if ((speed == 1000) &&
+	   (iface == RGMII_ID ||
+	    iface == RGMII_RXID ||
+	    iface == RGMII_TXID)) {
 		int temp;
 
 		temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
-		if (iface == ENET_1000_RGMII_ID) {
+		if (iface == RGMII_ID) {
 			temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
-		} else if (iface == ENET_1000_RGMII_RXID) {
+		} else if (iface == RGMII_RXID) {
 			temp &= ~MII_M1111_TX_DELAY;
 			temp |= MII_M1111_RX_DELAY;
-		} else if (iface == ENET_1000_RGMII_TXID) {
+		} else if (iface == RGMII_TXID) {
 			temp &= ~MII_M1111_RX_DELAY;
 			temp |= MII_M1111_TX_DELAY;
 		}
@@ -795,7 +798,9 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 }
 
 void marvell_phy_interface_mode (struct eth_device *dev,
-				 enet_interface_e mode)
+				 enet_interface_type_e type,
+				 int speed
+				)
 {
 	uec_private_t *uec = (uec_private_t *) dev->priv;
 	struct uec_mii_info *mii_info;
@@ -807,33 +812,35 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 	}
 	mii_info = uec->mii_info;
 
-	if (mode == ENET_100_RGMII) {
-		phy_write (mii_info, 0x00, 0x9140);
-		phy_write (mii_info, 0x1d, 0x001f);
-		phy_write (mii_info, 0x1e, 0x200c);
-		phy_write (mii_info, 0x1d, 0x0005);
-		phy_write (mii_info, 0x1e, 0x0000);
-		phy_write (mii_info, 0x1e, 0x0100);
-		phy_write (mii_info, 0x09, 0x0e00);
-		phy_write (mii_info, 0x04, 0x01e1);
-		phy_write (mii_info, 0x00, 0x9140);
-		phy_write (mii_info, 0x00, 0x1000);
-		udelay (100000);
-		phy_write (mii_info, 0x00, 0x2900);
-		phy_write (mii_info, 0x14, 0x0cd2);
-		phy_write (mii_info, 0x00, 0xa100);
-		phy_write (mii_info, 0x09, 0x0000);
-		phy_write (mii_info, 0x1b, 0x800b);
-		phy_write (mii_info, 0x04, 0x05e1);
-		phy_write (mii_info, 0x00, 0xa100);
-		phy_write (mii_info, 0x00, 0x2100);
-		udelay (1000000);
-	} else if (mode == ENET_10_RGMII) {
-		phy_write (mii_info, 0x14, 0x8e40);
-		phy_write (mii_info, 0x1b, 0x800b);
-		phy_write (mii_info, 0x14, 0x0c82);
-		phy_write (mii_info, 0x00, 0x8100);
-		udelay (1000000);
+	if (type == RGMII) {
+		if (speed == 100) {
+			phy_write (mii_info, 0x00, 0x9140);
+			phy_write (mii_info, 0x1d, 0x001f);
+			phy_write (mii_info, 0x1e, 0x200c);
+			phy_write (mii_info, 0x1d, 0x0005);
+			phy_write (mii_info, 0x1e, 0x0000);
+			phy_write (mii_info, 0x1e, 0x0100);
+			phy_write (mii_info, 0x09, 0x0e00);
+			phy_write (mii_info, 0x04, 0x01e1);
+			phy_write (mii_info, 0x00, 0x9140);
+			phy_write (mii_info, 0x00, 0x1000);
+			udelay (100000);
+			phy_write (mii_info, 0x00, 0x2900);
+			phy_write (mii_info, 0x14, 0x0cd2);
+			phy_write (mii_info, 0x00, 0xa100);
+			phy_write (mii_info, 0x09, 0x0000);
+			phy_write (mii_info, 0x1b, 0x800b);
+			phy_write (mii_info, 0x04, 0x05e1);
+			phy_write (mii_info, 0x00, 0xa100);
+			phy_write (mii_info, 0x00, 0x2100);
+			udelay (1000000);
+		} else if (speed == 10) {
+			phy_write (mii_info, 0x14, 0x8e40);
+			phy_write (mii_info, 0x1b, 0x800b);
+			phy_write (mii_info, 0x14, 0x0c82);
+			phy_write (mii_info, 0x00, 0x8100);
+			udelay (1000000);
+		}
 	}
 
 	/* handle 88e1111 rev.B2 erratum 5.6 */
@@ -844,9 +851,10 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 	/* now the B2 will correctly report autoneg completion status */
 }
 
-void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
+void change_phy_interface_mode (struct eth_device *dev,
+				enet_interface_type_e type, int speed)
 {
 #ifdef CONFIG_PHY_MODE_NEED_CHANGE
-	marvell_phy_interface_mode (dev, mode);
+	marvell_phy_interface_mode (dev, type, speed);
 #endif
 }