fsl: Change fsl_phy_enet_if to phy_interface_t

The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum.
This meant that drivers which used fsl_phy_enet_if to deal with
PHY interfaces would have to convert between the two (or we would have
to have them mirror each other, and deal with the ensuing maintenance
headache). Instead, we switch all clients of fsl_phy_enet_if over to
phy_interface_t, which should become the standard, anyway.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>

3 files changed, 49 insertions, 46 deletions

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index cd80f83522..1ecb1379a5 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -30,6 +30,7 @@
 #include "uec.h"
 #include "uec_phy.h"
 #include "miiphy.h"
+#include <phy.h>
 
 /* Default UTBIPAR SMI address */
 #ifndef CONFIG_UTBIPAR_INIT_TBIPA
@@ -321,9 +322,9 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
 }
 
 static int uec_set_mac_if_mode(uec_private_t *uec,
-		enum fsl_phy_enet_if if_mode, int speed)
+		phy_interface_t if_mode, int speed)
 {
-	enum fsl_phy_enet_if	enet_if_mode;
+	phy_interface_t		enet_if_mode;
 	uec_info_t		*uec_info;
 	uec_t			*uec_regs;
 	u32			upsmr;
@@ -345,15 +346,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
 	upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
 
 	switch (speed) {
-		case 10:
+		case SPEED_10:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 			switch (enet_if_mode) {
-				case MII:
+				case PHY_INTERFACE_MODE_MII:
 					break;
-				case RGMII:
+				case PHY_INTERFACE_MODE_RGMII:
 					upsmr |= (UPSMR_RPM | UPSMR_R10M);
 					break;
-				case RMII:
+				case PHY_INTERFACE_MODE_RMII:
 					upsmr |= (UPSMR_R10M | UPSMR_RMM);
 					break;
 				default:
@@ -361,15 +362,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
 					break;
 			}
 			break;
-		case 100:
+		case SPEED_100:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 			switch (enet_if_mode) {
-				case MII:
+				case PHY_INTERFACE_MODE_MII:
 					break;
-				case RGMII:
+				case PHY_INTERFACE_MODE_RGMII:
 					upsmr |= UPSMR_RPM;
 					break;
-				case RMII:
+				case PHY_INTERFACE_MODE_RMII:
 					upsmr |= UPSMR_RMM;
 					break;
 				default:
@@ -377,23 +378,24 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
 					break;
 			}
 			break;
-		case 1000:
+		case SPEED_1000:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 			switch (enet_if_mode) {
-				case GMII:
+				case PHY_INTERFACE_MODE_GMII:
 					break;
-				case TBI:
+				case PHY_INTERFACE_MODE_TBI:
 					upsmr |= UPSMR_TBIM;
 					break;
-				case RTBI:
+				case PHY_INTERFACE_MODE_RTBI:
 					upsmr |= (UPSMR_RPM | UPSMR_TBIM);
 					break;
-				case RGMII_RXID:
-				case RGMII_ID:
-				case RGMII:
+				case PHY_INTERFACE_MODE_RGMII_RXID:
+				case PHY_INTERFACE_MODE_RGMII_TXID:
+				case PHY_INTERFACE_MODE_RGMII_ID:
+				case PHY_INTERFACE_MODE_RGMII:
 					upsmr |= UPSMR_RPM;
 					break;
-				case SGMII:
+				case PHY_INTERFACE_MODE_SGMII:
 					upsmr |= UPSMR_SGMM;
 					break;
 				default:
@@ -518,7 +520,7 @@ static void adjust_link(struct eth_device *dev)
 	struct uec_mii_info	*mii_info = uec->mii_info;
 
 	extern void change_phy_interface_mode(struct eth_device *dev,
-				 enum fsl_phy_enet_if mode, int speed);
+				 phy_interface_t mode, int speed);
 	uec_regs = uec->uec_regs;
 
 	if (mii_info->link) {
@@ -536,19 +538,19 @@ static void adjust_link(struct eth_device *dev)
 		}
 
 		if (mii_info->speed != uec->oldspeed) {
-			enum fsl_phy_enet_if	mode = \
+			phy_interface_t mode =
 				uec->uec_info->enet_interface_type;
 			if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
 				switch (mii_info->speed) {
-				case 1000:
+				case SPEED_1000:
 					break;
-				case 100:
+				case SPEED_100:
 					printf ("switching to rgmii 100\n");
-					mode = RGMII;
+					mode = PHY_INTERFACE_MODE_RGMII;
 					break;
-				case 10:
+				case SPEED_10:
 					printf ("switching to rgmii 10\n");
-					mode = RGMII;
+					mode = PHY_INTERFACE_MODE_RGMII;
 					break;
 				default:
 					printf("%s: Ack,Speed(%d)is illegal\n",
@@ -1112,8 +1114,8 @@ static int uec_startup(uec_private_t *uec)
 	out_be32(&uec_regs->utbipar, utbipar);
 
 	/* Configure the TBI for SGMII operation */
-	if ((uec->uec_info->enet_interface_type == SGMII) &&
-	   (uec->uec_info->speed == 1000)) {
+	if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
+	   (uec->uec_info->speed == SPEED_1000)) {
 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
 			ENET_TBI_MII_ANA, TBIANA_SETTINGS);
 
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 94eb9a26d7..e63bf3a652 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -25,6 +25,7 @@
 
 #include "qe.h"
 #include "uccf.h"
+#include <phy.h>
 #include <asm/fsl_enet.h>
 
 #define MAX_TX_THREADS				8
@@ -691,7 +692,7 @@ typedef struct uec_info {
 	u16				rx_bd_ring_len;
 	u16				tx_bd_ring_len;
 	u8				phy_address;
-	enum fsl_phy_enet_if		enet_interface_type;
+	phy_interface_t			enet_interface_type;
 	int				speed;
 } uec_info_t;
 
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index c83ca4b582..e26218be88 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
 #include "uec.h"
 #include "uec_phy.h"
 #include "miiphy.h"
+#include <phy.h>
 
 #define ugphy_printk(format, arg...)  \
 	printf(format "\n", ## arg)
@@ -456,8 +457,9 @@ static int bcm_init(struct uec_mii_info *mii_info)
 
 	gbit_config_aneg(mii_info);
 
-	if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
-	   (uec->uec_info->speed == 1000)) {
+	if ((uec->uec_info->enet_interface_type ==
+				PHY_INTERFACE_MODE_RGMII_RXID) &&
+			(uec->uec_info->speed == SPEED_1000)) {
 		u16 val;
 		int cnt = 50;
 
@@ -485,22 +487,22 @@ static int uec_marvell_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
 	uec_private_t *uec = edev->priv;
-	enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+	phy_interface_t iface = uec->uec_info->enet_interface_type;
 	int	speed = uec->uec_info->speed;
 
-	if ((speed == 1000) &&
-	   (iface == RGMII_ID ||
-	    iface == RGMII_RXID ||
-	    iface == RGMII_TXID)) {
+	if ((speed == SPEED_1000) &&
+	   (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+	    iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 		int temp;
 
 		temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
-		if (iface == RGMII_ID) {
+		if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
 			temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
-		} else if (iface == RGMII_RXID) {
+		} else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
 			temp &= ~MII_M1111_TX_DELAY;
 			temp |= MII_M1111_RX_DELAY;
-		} else if (iface == RGMII_TXID) {
+		} else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
 			temp &= ~MII_M1111_RX_DELAY;
 			temp |= MII_M1111_TX_DELAY;
 		}
@@ -853,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 	return theInfo;
 }
 
-void marvell_phy_interface_mode (struct eth_device *dev,
-				 enum fsl_phy_enet_if type,
-				 int speed
-				)
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+		int speed)
 {
 	uec_private_t *uec = (uec_private_t *) dev->priv;
 	struct uec_mii_info *mii_info;
@@ -868,8 +868,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 	}
 	mii_info = uec->mii_info;
 
-	if (type == RGMII) {
-		if (speed == 100) {
+	if (type == PHY_INTERFACE_MODE_RGMII) {
+		if (speed == SPEED_100) {
 			uec_phy_write(mii_info, 0x00, 0x9140);
 			uec_phy_write(mii_info, 0x1d, 0x001f);
 			uec_phy_write(mii_info, 0x1e, 0x200c);
@@ -890,7 +890,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 			uec_phy_write(mii_info, 0x00, 0xa100);
 			uec_phy_write(mii_info, 0x00, 0x2100);
 			udelay (1000000);
-		} else if (speed == 10) {
+		} else if (speed == SPEED_10) {
 			uec_phy_write(mii_info, 0x14, 0x8e40);
 			uec_phy_write(mii_info, 0x1b, 0x800b);
 			uec_phy_write(mii_info, 0x14, 0x0c82);
@@ -908,7 +908,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 }
 
 void change_phy_interface_mode (struct eth_device *dev,
-				enum fsl_phy_enet_if type, int speed)
+				phy_interface_t type, int speed)
 {
 #ifdef CONFIG_PHY_MODE_NEED_CHANGE
 	marvell_phy_interface_mode (dev, type, speed);