diff options
| author | Stefan Roese <sr@denx.de> | 2020-11-16 18:02:29 +0100 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-01-27 08:25:31 -0500 |
| commit | 919c8ede869caeb1a60fb596e759a2bf74030801 (patch) | |
| tree | d4b74db1250ed534febf5303f73e7f9cd1afb586 /drivers/net | |
| parent | 55f010356763d567ec9ec23f29a58af7b0fd2185 (diff) | |
| download | u-boot-919c8ede869caeb1a60fb596e759a2bf74030801.tar.gz | |
net: e1000: Use virt_to_phys() instead of pci_virt_to_mem()
Using (dm_)pci_virt_to_mem() is incorrect to translate the virtual
address in local DRAM to a physical address. The correct macro here
is virt_to_phys() so switch to using this macro.
As virt_to_bus() is now not used any more, this patch also removes
both definitions (DM and non-DM).
This issue was detected while testing the e1000 driver on the MIPS
Octeon III platform, which needs address translation.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/e1000.c | 8 |
1 files changed, 1 insertions, 7 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 372f6c30ba..6d6bf8c827 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -45,12 +45,6 @@ tested on both gig copper and gig fiber boards #define TOUT_LOOP 100000 -#ifdef CONFIG_DM_ETH -#define virt_to_bus(devno, v) dm_pci_virt_to_mem(devno, (void *) (v)) -#else -#define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) -#endif - #define E1000_DEFAULT_PCI_PBA 0x00000030 #define E1000_DEFAULT_PCIE_PBA 0x000a0026 @@ -5385,7 +5379,7 @@ static int _e1000_transmit(struct e1000_hw *hw, void *txpacket, int length) txp = tx_base + tx_tail; tx_tail = (tx_tail + 1) % 8; - txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet)); + txp->buffer_addr = cpu_to_le64(virt_to_phys(nv_packet)); txp->lower.data = cpu_to_le32(hw->txd_cmd | length); txp->upper.data = 0; |