net: designware: add Amlogic Meson8b & later glue driver

This adds a proper glue driver for the Designware DWMAC ethernet MAC IP
found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs.

This is aimed to replace the static ethernet link setup found on the board
init code for the Amlogic SoC based boards.

Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d
with external 10/100/1000 RGMII PHY) to cover the most extreme setups.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

1 files changed, 150 insertions, 0 deletions

diff --git a/drivers/net/dwmac_meson8b.c b/drivers/net/dwmac_meson8b.c
new file mode 100644
index 0000000000..c0b6ef4994
--- /dev/null
+++ b/drivers/net/dwmac_meson8b.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 BayLibre, SAS
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <phy.h>
+#include "designware.h"
+#include <dm/device_compat.h>
+#include <linux/err.h>
+
+#define ETH_REG_0		0x0
+#define ETH_REG_1		0x4
+#define ETH_REG_2		0x18
+#define ETH_REG_3		0x1c
+
+#define GX_ETH_REG_0_PHY_INTF		BIT(0)
+#define GX_ETH_REG_0_TX_PHASE(x)	(((x) & 3) << 5)
+#define GX_ETH_REG_0_TX_RATIO(x)	(((x) & 7) << 7)
+#define GX_ETH_REG_0_PHY_CLK_EN	BIT(10)
+#define GX_ETH_REG_0_INVERT_RMII_CLK	BIT(11)
+#define GX_ETH_REG_0_CLK_EN		BIT(12)
+
+#define AXG_ETH_REG_0_PHY_INTF_RGMII	BIT(0)
+#define AXG_ETH_REG_0_PHY_INTF_RMII	BIT(2)
+#define AXG_ETH_REG_0_TX_PHASE(x)	(((x) & 3) << 5)
+#define AXG_ETH_REG_0_TX_RATIO(x)	(((x) & 7) << 7)
+#define AXG_ETH_REG_0_PHY_CLK_EN	BIT(10)
+#define AXG_ETH_REG_0_INVERT_RMII_CLK	BIT(11)
+#define AXG_ETH_REG_0_CLK_EN		BIT(12)
+
+struct dwmac_meson8b_plat {
+	struct dw_eth_pdata dw_eth_pdata;
+	int (*dwmac_setup)(struct udevice *dev, struct eth_pdata *edata);
+	void *regs;
+};
+
+static int dwmac_meson8b_of_to_plat(struct udevice *dev)
+{
+	struct dwmac_meson8b_plat *pdata = dev_get_plat(dev);
+
+	pdata->regs = (void *)dev_read_addr_index(dev, 1);
+	if ((fdt_addr_t)pdata->regs == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	pdata->dwmac_setup = (void *)dev_get_driver_data(dev);
+	if (!pdata->dwmac_setup)
+		return -EINVAL;
+
+	return designware_eth_of_to_plat(dev);
+}
+
+static int dwmac_setup_axg(struct udevice *dev, struct eth_pdata *edata)
+{
+	struct dwmac_meson8b_plat *plat = dev_get_plat(dev);
+
+	switch (edata->phy_interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		/* Set RGMII mode */
+		setbits_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII |
+						     AXG_ETH_REG_0_TX_PHASE(1) |
+						     AXG_ETH_REG_0_TX_RATIO(4) |
+						     AXG_ETH_REG_0_PHY_CLK_EN |
+						     AXG_ETH_REG_0_CLK_EN);
+		break;
+
+	case PHY_INTERFACE_MODE_RMII:
+		/* Set RMII mode */
+		out_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RMII |
+						 AXG_ETH_REG_0_INVERT_RMII_CLK |
+						 AXG_ETH_REG_0_CLK_EN);
+		break;
+	default:
+		dev_err(dev, "Unsupported PHY mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dwmac_setup_gx(struct udevice *dev, struct eth_pdata *edata)
+{
+	struct dwmac_meson8b_plat *plat = dev_get_plat(dev);
+
+	switch (edata->phy_interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		/* Set RGMII mode */
+		setbits_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
+						     GX_ETH_REG_0_TX_PHASE(1) |
+						     GX_ETH_REG_0_TX_RATIO(4) |
+						     GX_ETH_REG_0_PHY_CLK_EN |
+						     GX_ETH_REG_0_CLK_EN);
+
+		break;
+
+	case PHY_INTERFACE_MODE_RMII:
+		/* Set RMII mode */
+		out_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
+						 GX_ETH_REG_0_CLK_EN);
+
+		if (!IS_ENABLED(CONFIG_MESON_GXBB))
+			writel(0x10110181, plat->regs + ETH_REG_2);
+
+		break;
+	default:
+		dev_err(dev, "Unsupported PHY mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dwmac_meson8b_probe(struct udevice *dev)
+{
+	struct dwmac_meson8b_plat *pdata = dev_get_plat(dev);
+	struct eth_pdata *edata = &pdata->dw_eth_pdata.eth_pdata;
+	int ret;
+
+	ret = pdata->dwmac_setup(dev, edata);
+	if (ret)
+		return ret;
+
+	return designware_eth_probe(dev);
+}
+
+static const struct udevice_id dwmac_meson8b_ids[] = {
+	{ .compatible = "amlogic,meson-gxbb-dwmac", .data = (ulong)dwmac_setup_gx },
+	{ .compatible = "amlogic,meson-axg-dwmac", .data = (ulong)dwmac_setup_axg },
+	{ }
+};
+
+U_BOOT_DRIVER(dwmac_meson8b) = {
+	.name		= "dwmac_meson8b",
+	.id		= UCLASS_ETH,
+	.of_match	= dwmac_meson8b_ids,
+	.of_to_plat = dwmac_meson8b_of_to_plat,
+	.probe		= dwmac_meson8b_probe,
+	.ops		= &designware_eth_ops,
+	.priv_auto	= sizeof(struct dw_eth_dev),
+	.plat_auto	= sizeof(struct dwmac_meson8b_plat),
+	.flags		= DM_FLAG_ALLOC_PRIV_DMA,
+};