Merge git://git.denx.de/u-boot-socfpga

1 files changed, 2 insertions, 233 deletions

diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
index f1b2f2c4da..28fa16b944 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga.c
@@ -19,18 +19,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static struct socfpga_fpga_manager *fpgamgr_regs =
 	(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
-	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 
-/* Set CD ratio */
-static void fpgamgr_set_cd_ratio(unsigned long ratio)
-{
-	clrsetbits_le32(&fpgamgr_regs->ctrl,
-			0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB,
-			(ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB);
-}
-
-static int fpgamgr_dclkcnt_set(unsigned long cnt)
+int fpgamgr_dclkcnt_set(unsigned long cnt)
 {
 	unsigned long i;
 
@@ -53,98 +43,8 @@ static int fpgamgr_dclkcnt_set(unsigned long cnt)
 	return -ETIMEDOUT;
 }
 
-/* Start the FPGA programming by initialize the FPGA Manager */
-static int fpgamgr_program_init(void)
-{
-	unsigned long msel, i;
-
-	/* Get the MSEL value */
-	msel = readl(&fpgamgr_regs->stat);
-	msel &= FPGAMGRREGS_STAT_MSEL_MASK;
-	msel >>= FPGAMGRREGS_STAT_MSEL_LSB;
-
-	/*
-	 * Set the cfg width
-	 * If MSEL[3] = 1, cfg width = 32 bit
-	 */
-	if (msel & 0x8) {
-		setbits_le32(&fpgamgr_regs->ctrl,
-			     FPGAMGRREGS_CTRL_CFGWDTH_MASK);
-
-		/* To determine the CD ratio */
-		/* MSEL[1:0] = 0, CD Ratio = 1 */
-		if ((msel & 0x3) == 0x0)
-			fpgamgr_set_cd_ratio(CDRATIO_x1);
-		/* MSEL[1:0] = 1, CD Ratio = 4 */
-		else if ((msel & 0x3) == 0x1)
-			fpgamgr_set_cd_ratio(CDRATIO_x4);
-		/* MSEL[1:0] = 2, CD Ratio = 8 */
-		else if ((msel & 0x3) == 0x2)
-			fpgamgr_set_cd_ratio(CDRATIO_x8);
-
-	} else {	/* MSEL[3] = 0 */
-		clrbits_le32(&fpgamgr_regs->ctrl,
-			     FPGAMGRREGS_CTRL_CFGWDTH_MASK);
-
-		/* To determine the CD ratio */
-		/* MSEL[1:0] = 0, CD Ratio = 1 */
-		if ((msel & 0x3) == 0x0)
-			fpgamgr_set_cd_ratio(CDRATIO_x1);
-		/* MSEL[1:0] = 1, CD Ratio = 2 */
-		else if ((msel & 0x3) == 0x1)
-			fpgamgr_set_cd_ratio(CDRATIO_x2);
-		/* MSEL[1:0] = 2, CD Ratio = 4 */
-		else if ((msel & 0x3) == 0x2)
-			fpgamgr_set_cd_ratio(CDRATIO_x4);
-	}
-
-	/* To enable FPGA Manager configuration */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCE_MASK);
-
-	/* To enable FPGA Manager drive over configuration line */
-	setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
-
-	/* Put FPGA into reset phase */
-	setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
-
-	/* (1) wait until FPGA enter reset phase */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_RESETPHASE)
-			break;
-	}
-
-	/* If not in reset state, return error */
-	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) {
-		puts("FPGA: Could not reset\n");
-		return -1;
-	}
-
-	/* Release FPGA from reset phase */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
-
-	/* (2) wait until FPGA enter configuration phase */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_CFGPHASE)
-			break;
-	}
-
-	/* If not in configuration state, return error */
-	if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) {
-		puts("FPGA: Could not configure\n");
-		return -2;
-	}
-
-	/* Clear all interrupts in CB Monitor */
-	writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi);
-
-	/* Enable AXI configuration */
-	setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
-
-	return 0;
-}
-
 /* Write the RBF data to FPGA Manager */
-static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
+void fpgamgr_program_write(const void *rbf_data, size_t rbf_size)
 {
 	uint32_t src = (uint32_t)rbf_data;
 	uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS;
@@ -171,134 +71,3 @@ static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
 		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "cc");
 }
 
-/* Ensure the FPGA entering config done */
-static int fpgamgr_program_poll_cd(void)
-{
-	const uint32_t mask = FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK |
-			      FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK;
-	unsigned long reg, i;
-
-	/* (3) wait until full config done */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		reg = readl(&fpgamgr_regs->gpio_ext_porta);
-
-		/* Config error */
-		if (!(reg & mask)) {
-			printf("FPGA: Configuration error.\n");
-			return -3;
-		}
-
-		/* Config done without error */
-		if (reg & mask)
-			break;
-	}
-
-	/* Timeout happened, return error */
-	if (i == FPGA_TIMEOUT_CNT) {
-		printf("FPGA: Timeout waiting for program.\n");
-		return -4;
-	}
-
-	/* Disable AXI configuration */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
-
-	return 0;
-}
-
-/* Ensure the FPGA entering init phase */
-static int fpgamgr_program_poll_initphase(void)
-{
-	unsigned long i;
-
-	/* Additional clocks for the CB to enter initialization phase */
-	if (fpgamgr_dclkcnt_set(0x4))
-		return -5;
-
-	/* (4) wait until FPGA enter init phase or user mode */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_INITPHASE)
-			break;
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
-			break;
-	}
-
-	/* If not in configuration state, return error */
-	if (i == FPGA_TIMEOUT_CNT)
-		return -6;
-
-	return 0;
-}
-
-/* Ensure the FPGA entering user mode */
-static int fpgamgr_program_poll_usermode(void)
-{
-	unsigned long i;
-
-	/* Additional clocks for the CB to exit initialization phase */
-	if (fpgamgr_dclkcnt_set(0x5000))
-		return -7;
-
-	/* (5) wait until FPGA enter user mode */
-	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
-		if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
-			break;
-	}
-	/* If not in configuration state, return error */
-	if (i == FPGA_TIMEOUT_CNT)
-		return -8;
-
-	/* To release FPGA Manager drive over configuration line */
-	clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
-
-	return 0;
-}
-
-/*
- * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
- * Return 0 for sucess, non-zero for error.
- */
-int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
-{
-	unsigned long status;
-
-	if ((uint32_t)rbf_data & 0x3) {
-		puts("FPGA: Unaligned data, realign to 32bit boundary.\n");
-		return -EINVAL;
-	}
-
-	/* Prior programming the FPGA, all bridges need to be shut off */
-
-	/* Disable all signals from hps peripheral controller to fpga */
-	writel(0, &sysmgr_regs->fpgaintfgrp_module);
-
-	/* Disable all signals from FPGA to HPS SDRAM */
-#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS	0x5080
-	writel(0, SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_FPGAPORTRST_ADDRESS);
-
-	/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
-	socfpga_bridges_reset(1);
-
-	/* Unmap the bridges from NIC-301 */
-	writel(0x1, SOCFPGA_L3REGS_ADDRESS);
-
-	/* Initialize the FPGA Manager */
-	status = fpgamgr_program_init();
-	if (status)
-		return status;
-
-	/* Write the RBF data to FPGA Manager */
-	fpgamgr_program_write(rbf_data, rbf_size);
-
-	/* Ensure the FPGA entering config done */
-	status = fpgamgr_program_poll_cd();
-	if (status)
-		return status;
-
-	/* Ensure the FPGA entering init phase */
-	status = fpgamgr_program_poll_initphase();
-	if (status)
-		return status;
-
-	/* Ensure the FPGA entering user mode */
-	return fpgamgr_program_poll_usermode();
-}