Merge branch 'master' of git://www.denx.de/git/u-boot-imx

3 files changed, 26 insertions, 1 deletions

diff --git a/doc/README.imx6 b/doc/README.imx6
index 1823fb2c9d..73b8b0beff 100644
--- a/doc/README.imx6
+++ b/doc/README.imx6
@@ -91,7 +91,7 @@ Word 0x00000002: 9f027772 00000004
 2. Using imx_usb_loader for first install with SPL
 --------------------------------------------------
 
-imx_usb_loader is a very nice tool by BoundaryDevice that
+imx_usb_loader is a very nice tool by Boundary Devices that
 allow to install U-Boot without a JTAG debugger, using
 the USB boot mode as described in the manual. It is
 a replacement for Freescale's MFGTOOLS.
diff --git a/doc/device-tree-bindings/pmic/rn5t567.txt b/doc/device-tree-bindings/pmic/rn5t567.txt
new file mode 100644
index 0000000000..e9e688537c
--- /dev/null
+++ b/doc/device-tree-bindings/pmic/rn5t567.txt
@@ -0,0 +1,17 @@
+Ricoh RN5T567 PMIC
+
+This file describes the binding info for the PMIC driver.
+
+Required properties:
+- compatible: "ricoh,rn5t567"
+- reg: depending on strapping, e.g. 0x33
+
+With those two properties, the PMIC device can be used to read/write
+registers.
+
+Example:
+
+rn5t567@33 {
+	compatible = "ricoh,rn5t567";
+	reg = <0x33>;
+};
diff --git a/doc/device-tree-bindings/serial/mxc-serial.txt b/doc/device-tree-bindings/serial/mxc-serial.txt
new file mode 100644
index 0000000000..ede92a4854
--- /dev/null
+++ b/doc/device-tree-bindings/serial/mxc-serial.txt
@@ -0,0 +1,8 @@
+NXP i.MX (MXC) UART
+
+Required properties:
+- compatible: must be "fsl,imx7d-uart"
+- reg: start address and size of the registers
+
+Optional properties:
+- fsl,dte-mode: use DTE mode