diff options
| author | Stefan Bosch <stefan_b@posteo.net> | 2020-07-10 19:07:28 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-07-29 08:43:40 -0400 |
| commit | c25e9e04a12e93cd1a1928e941a3802d44765ccb (patch) | |
| tree | 7565f59dee6f99ea6a8518e64e3182b0384bc1ec /doc/device-tree-bindings | |
| parent | b8f748d6f233955cc116ee9ef7cc43dbc5326d81 (diff) | |
| download | u-boot-c25e9e04a12e93cd1a1928e941a3802d44765ccb.tar.gz | |
i2c: add nexell driver
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- i2c/nx_i2c.c: Some adaptions mainly because of changes in
"struct udevice".
- several Bugfixes in nx_i2c.c.
- the driver has been for s5p6818 only. Code extended appropriately
in order s5p4418 is also working.
- "probe_chip" added.
- pinctrl-driver/dt is used instead of configuring the i2c I/O-pins
in the i2c-driver.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
Diffstat (limited to 'doc/device-tree-bindings')
| -rw-r--r-- | doc/device-tree-bindings/i2c/nx_i2c.txt | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/i2c/nx_i2c.txt b/doc/device-tree-bindings/i2c/nx_i2c.txt new file mode 100644 index 0000000000..9f3abe78e4 --- /dev/null +++ b/doc/device-tree-bindings/i2c/nx_i2c.txt @@ -0,0 +1,28 @@ +I2C controller embedded in Nexell's/Samsung's SoC S5P4418 and S5P6818 + +Driver: +- drivers/i2c/nx_i2c.c + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; +- compatible = "nexell,s5pxx18-i2c"; +- reg = <i2c_base 0x100>; + Where i2c_base has to be the base address of the i2c-register set. + I2C0: 0xc00a4000 + I2C1: 0xc00a5000 + I2C2: 0xc00a6000 + +Optional properties: +- clock-frequency: Desired I2C bus frequency in Hz, default value is 100000. +- i2c-sda-delay-ns (S5P6818 only): SDA delay in ns, default value is 0. +- Child nodes conforming to i2c bus binding. + +Example: + i2c0:i2c@c00a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nexell,s5pxx18-i2c"; + reg = <0xc00a4000 0x100>; + clock-frequency = <400000>; + }; |