Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into nextWIP/17Mar2020

K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm

2 files changed, 44 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/misc/esm-k3.txt b/doc/device-tree-bindings/misc/esm-k3.txt
new file mode 100644
index 0000000000..01c8b6b294
--- /dev/null
+++ b/doc/device-tree-bindings/misc/esm-k3.txt
@@ -0,0 +1,25 @@
+Texas Instruments K3 ESM Binding
+======================
+
+ESM (Error Signaling Module) is an IP block on TI K3 devices that allows
+handling of safety events somewhat similar to what interrupt controller
+would do. The safety signals have their separate paths within the SoC,
+and they are handled by the ESM, which routes them to the proper
+destination, which can be system reset, interrupt controller, etc. In
+the simplest configuration the signals are just routed to reset the
+SoC.
+
+Required properties :
+- compatible	: "ti,j721e-esm"
+- ti,esm-pins	: integer array of esm events IDs to route to external event
+		  pin which can be used to reset the SoC. The array can
+		  have arbitrary amount of event IDs listed on it.
+
+Example
+=======
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <344>, <345>;
+	};
diff --git a/doc/device-tree-bindings/misc/esm-pmic.txt b/doc/device-tree-bindings/misc/esm-pmic.txt
new file mode 100644
index 0000000000..a60ad74679
--- /dev/null
+++ b/doc/device-tree-bindings/misc/esm-pmic.txt
@@ -0,0 +1,19 @@
+PMIC ESM Binding
+======================
+
+Certain Power Management ICs contain safety handling logic within them,
+allowing automatic reset of the board in case a safety error is signaled.
+For this purpose, ESM (Error Signal Monitor) is implemented within
+the PMIC running its own state machine.
+
+Required properties :
+- compatible	: "ti,tps659413-esm"
+
+Example
+=======
+
+&tps659413a {
+	esm: esm {
+		compatible = "ti,tps659413-esm";
+	};
+};