diff options
| author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2016-03-23 01:40:05 +0900 |
|---|---|---|
| committer | Masahiro Yamada <yamada.masahiro@socionext.com> | 2016-03-24 01:45:41 +0900 |
| commit | d085ecd61b9956cda0d37b89b5c538f54440fe58 (patch) | |
| tree | 22e43a5f98992e66b1c7caafc4af9bcc6507494d /doc/README.uniphier | |
| parent | cbbc2d80fc58531c59cadc803717c9d53c9543f1 (diff) | |
| download | u-boot-d085ecd61b9956cda0d37b89b5c538f54440fe58.tar.gz | |
ARM: uniphier: switch to raw U-Boot image
Now everything is done to load a raw U-Boot proper image instead of
an mkimage-processed one (as far as I tested on NAND, eMMC, NOR).
The SPL already knows the load address of the U-Boot proper without
parsing its uImage header because the load address is defined by
CONFIG_SYS_TEXT_BASE, assuming that the two images are generated from
the same build.
My main motivation of this switch is to use u-boot-with-spl.bin, a
concatenation of u-boot-spl.bin and u-boot.bin. (I wish there were
a concatenation of u-boot-spl.bin and u-boot.img...) Anyway, this
commit would be useful for one-shot image burn.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'doc/README.uniphier')
| -rw-r--r-- | doc/README.uniphier | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/doc/README.uniphier b/doc/README.uniphier index 47863a4af2..49045a0218 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -75,12 +75,17 @@ to use your favorite compiler. Burn U-Boot images to NAND -------------------------- -Write two files to the NAND device as follows: +Write the following to the NAND device: + - spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot.img at the offset address 0x00010000 + - u-boot.bin at the offset address 0x00010000 + +or + + - u-boot-with-spl.bin at the offset address 0x00000000 If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory, +Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory, and then run the following command at the U-Boot command line: => run nandupdate @@ -89,12 +94,17 @@ and then run the following command at the U-Boot command line: Burn U-Boot images to eMMC -------------------------- -Write two files to the Boot partition 1 of the eMMC device as follows: +Write the following to the Boot partition 1 of the eMMC device: + - spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot.img at the offset address 0x00010000 + - u-boot.bin at the offset address 0x00010000 + +or + + - u-boot-with-spl.bin at the offset address 0x00000000 If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory, +Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory, and then run the following command at the U-Boot command line: => run emmcupdate |