Merge branch 'next' of git://git.denx.de/u-boot

* 'next' of git://git.denx.de/u-boot:
  MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
  doc: cleanup - move board READMEs into respective board directories
  net: sh_eth: add support for SH7757's GETHER
  net: sh_eth: modify the definitions of regsiter
  net: sh_eth: add SH_ETH_TYPE_ condition
  net: sh_eth: clean up for the SH7757's code
  net: fec_mxc: Fix MDC for xMII
  net: fec_mxc: Fix setting of RCR for xMII
  net: nfs: make NFS_TIMEOUT configurable
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 5 insertions, 1 deletions

diff --git a/doc/README.enetaddr b/doc/README.enetaddr
index 2d8e24f5cb..1eaeaf9416 100644
--- a/doc/README.enetaddr
+++ b/doc/README.enetaddr
@@ -32,7 +32,11 @@ Correct flow of setting up the MAC address (summarized):
 
 1. Read from hardware in initialize() function
 2. Read from environment in net/eth.c after initialize()
-3. Give priority to the value in the environment if a conflict
+3. The environment variable will be compared to the driver initialized
+   struct eth_device->enetaddr. If they differ, a warning is printed, and the
+   environment variable will be used unchanged.
+   If the environment variable is not set, it will be initialized from
+   eth_device->enetaddr, and a warning will be printed.
 4. Program the address into hardware if the following conditions are met:
 	a) The relevant driver has a 'write_addr' function
 	b) The user hasn't set an 'ethmacskip' environment variable