diff options
| author | Michal Simek <michal.simek@xilinx.com> | 2021-07-27 16:19:18 +0200 |
|---|---|---|
| committer | Michal Simek <michal.simek@xilinx.com> | 2021-08-06 09:32:02 +0200 |
| commit | b86f43de0be0c511358a7caeab5d935a64eb9599 (patch) | |
| tree | fef460ab12d51d00766d8fd82bebc0ad25978385 /configs | |
| parent | 7c113be55103e7e3bbcb000661eafbdc03a13fe5 (diff) | |
| download | u-boot-b86f43de0be0c511358a7caeab5d935a64eb9599.tar.gz | |
xilinx: zynqmp: Add support for runtime dfu_alt_info setup
The main reason for this to be implemented is capsule update.
Two memories are supported and tested which is MMC FAT based and QSPI
based.
For creating capsule these commands are used:
./tools/mkeficapsule --raw spl/boot.bin --index 1 capsule1.bin
./tools/mkeficapsule --raw u-boot.itb --index 2 capsule2.bin
Then transfer to SD card where these commands run:
load mmc 0 10000000 capsule1.bin
efidebug capsule update -v 10000000
load mmc 0 10000000 capsule2.bin
efidebug capsule update -v 10000000
Depends on the boot device used are binaries loaded to qspi or mmc fat
partition.
Also multiboot register is handled to make sure that the same location(id)
is used as image which is upgraded.
Two locations are used by purpose for SPL flow. If only boot.bin is used
create only one capsule.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/xilinx_zynqmp_virt_defconfig | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 73972a0dc9..40a87ca904 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -94,6 +94,7 @@ CONFIG_DFU_NAND=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y CONFIG_DFU_MTD=y +CONFIG_SET_DFU_ALT_INFO=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000 CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_FLASH=y |