diff options
| author | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2017-05-31 18:18:49 +0200 |
|---|---|---|
| committer | Simon Glass <sjg@chromium.org> | 2017-06-07 07:29:24 -0600 |
| commit | c5d905ff0a09b6569c85548a8e50fff257685813 (patch) | |
| tree | df600899befe5c0e1b8cdf5bf0e2e2d8370c987d /configs/puma-rk3399_defconfig | |
| parent | 73dc80a62211fc6973b80c1564837cb915c301a8 (diff) | |
| download | u-boot-c5d905ff0a09b6569c85548a8e50fff257685813.tar.gz | |
rockchip: defconfig: puma-rk3399: enable I2C
The RK3399-Q7 exposes I2C on its edge connector and uses it as one of
the interfaces towards the on-module STM32 (for the emulated RTC and
fan-controller).
Enable I2C and CMD_I2C support in the defconfig.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'configs/puma-rk3399_defconfig')
| -rw-r--r-- | configs/puma-rk3399_defconfig | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 4e5c9234aa..5c302e5b7d 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -9,8 +9,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma" +CONFIG_DEBUG_UART=y CONFIG_FIT=y -CONFIG_SPL_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its" # CONFIG_DISPLAY_CPUINFO is not set @@ -25,6 +25,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -37,6 +38,7 @@ CONFIG_SPL_SYSCON=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_MMC_DW=y @@ -61,7 +63,6 @@ CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y -CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_BASE=0xFF180000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_SHIFT=2 |