diff options
| author | Stephen Warren <swarren@nvidia.com> | 2016-05-12 13:32:56 -0600 |
|---|---|---|
| committer | Tom Warren <twarren@nvidia.com> | 2016-05-31 11:22:59 -0700 |
| commit | 10a03382f0f8e774e58df7143e1a8ea52903ae1f (patch) | |
| tree | da2aafb053f1fc61cb631c95e5788820b6eea45f /configs/p2771-0000_defconfig | |
| parent | c7ba99c8c18a606b95a89366bc4fd94a8295772f (diff) | |
| download | u-boot-10a03382f0f8e774e58df7143e1a8ea52903ae1f.tar.gz | |
ARM: tegra: add p2771-0000 board support
P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The
combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B
port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion
headers.
Currently, due to U-Boot's level of support for Tegra186, the only
features supported by U-Boot are the console UART and the on-board eMMC.
Additional features will be added over time.
U-Boot has so far been tested by replacing the kernel image on the device
with a U-Boot binary. It is anticipated that U-Boot will eventually
replace the CCPLEX bootloader binary, as on previous chips. This hasn't
yet been tested.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'configs/p2771-0000_defconfig')
| -rw-r--r-- | configs/p2771-0000_defconfig | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/configs/p2771-0000_defconfig b/configs/p2771-0000_defconfig new file mode 100644 index 0000000000..9f2c418f9f --- /dev/null +++ b/configs/p2771-0000_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_TEGRA=y +CONFIG_TEGRA186=y +CONFIG_TARGET_P2771_0000=y +CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000" +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Tegra186 (P2771-0000) # " +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +# CONFIG_CMD_NFS is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y |