diff options
| author | Joe Hershberger <joe.hershberger@ni.com> | 2015-05-05 19:08:13 -0500 |
|---|---|---|
| committer | Joe Hershberger <joe.hershberger@ni.com> | 2015-06-01 09:39:29 -0500 |
| commit | 7453cb595cc17898a8227777b410b3e34a689c37 (patch) | |
| tree | f0a9e763915f7d0cd99f9d3309fe8ff7fcef5bd2 /configs/ga10h_v1_1_defconfig | |
| parent | a4bdf1def41a75a8e5a9203d0ad39f0120f8a583 (diff) | |
| download | u-boot-7453cb595cc17898a8227777b410b3e34a689c37.tar.gz | |
Move setexpr to Kconfig
Another shell scripting command that has not been moved.
Moved using tools/moveconfig.py using these settings:
CMD_SETEXPR bool n y
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'configs/ga10h_v1_1_defconfig')
| -rw-r--r-- | configs/ga10h_v1_1_defconfig | 31 |
1 files changed, 12 insertions, 19 deletions
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 3eca0237f3..823e9db6e2 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -1,29 +1,22 @@ -# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, -# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. -# -# This defconfig is for the v1.1 pcb with an a33 soc. -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=432 +CONFIG_DRAM_ZQ=15291 +CONFIG_DRAM_ODT_EN=y CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" -CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" -#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN8I_A33=y -CONFIG_DRAM_CLK=432 -# zq = 0x3bbb -CONFIG_DRAM_ZQ=15291 -CONFIG_DRAM_ODT_EN=y -# Wifi power +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y CONFIG_AXP221_DLDO1_VOLT=3300 -# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP CONFIG_AXP221_ALDO1_VOLT=3000 |