diff options
| author | Mario Six <mario.six@gdsys.cc> | 2019-01-21 09:17:54 +0100 |
|---|---|---|
| committer | Mario Six <mario.six@gdsys.cc> | 2019-05-21 07:52:25 +0200 |
| commit | 21c1502a4a81904706b9883f523ec4a94aba880f (patch) | |
| tree | c04e236d3366a84cdad3b19eb297f33d89d3c283 /configs/MPC8313ERDB_NAND_33_defconfig | |
| parent | ff3bb0c435e0d10ccb61a8fd2dada3ae72f1f97e (diff) | |
| download | u-boot-21c1502a4a81904706b9883f523ec4a94aba880f.tar.gz | |
mpc83xx: Kconfig: Migrate HRCW to Kconfig
The HRCW (hardware reset configuration word) is a constant that must be
hard-coded into the boot loader image. So, it must be available at
compile time, and cannot be migrated to the DT mechanism, but has to be
kept in Kconfig.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Diffstat (limited to 'configs/MPC8313ERDB_NAND_33_defconfig')
| -rw-r--r-- | configs/MPC8313ERDB_NAND_33_defconfig | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig index 80ed52b2e1..adec951b72 100644 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ b/configs/MPC8313ERDB_NAND_33_defconfig @@ -5,6 +5,13 @@ CONFIG_SPL=y CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB_NAND=y +CONFIG_SYSTEM_PLL_FACTOR_5_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" |