diff options
| author | Tom Rini <trini@konsulko.com> | 2020-04-07 11:58:44 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-04-07 17:13:35 -0400 |
| commit | 1f47e2aca42c2e51ff3a7754c717ee13f568c721 (patch) | |
| tree | eca6cb5e551dbb75c2328b1dba3e7a2b8a77d327 /configs/Bananapi_M2_Ultra_defconfig | |
| parent | 2b18b89156335bf1f0d84f81d3597762bc48c61d (diff) | |
| parent | 895a7866c20cf6c01779b5a60fbf2770b88930a4 (diff) | |
| download | u-boot-1f47e2aca42c2e51ff3a7754c717ee13f568c721.tar.gz | |
Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into nextWIP/07Apr2020-next
Xilinx changes for v2020.07
common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code
xilinx:
- Enable netconsole
Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE
Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver
ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3
Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR
Drivers:
- Gem:
- Flush memory after freeing
- Handle mdio bus separately
- Watchdog:
- Get rid of unused global data pointer
- Enable window watchdog timer
- Serial:
- Change reinitialization logic in zynq serial driver
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'configs/Bananapi_M2_Ultra_defconfig')
| -rw-r--r-- | configs/Bananapi_M2_Ultra_defconfig | 4 |
1 files changed, 0 insertions, 4 deletions
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index 31a37e9675..e3d676708d 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 @@ -11,10 +10,8 @@ CONFIG_USB1_VBUS_PIN="PH23" CONFIG_USB2_VBUS_PIN="PH23" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_USE_PREBOOT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SCSI_AHCI=y CONFIG_RGMII=y CONFIG_SUN8I_EMAC=y @@ -23,4 +20,3 @@ CONFIG_AXP_ELDO3_VOLT=1200 CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y -CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y |