spl: support booting via RISC-V OpenSBI

RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor
Binary Interface (SBI) specification. It is required by Linux and U-Boot
running in supervisor mode. This patch adds support for booting via the
OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher.

In this configuration, U-Boot SPL starts in machine mode. After loading
OpenSBI and U-Boot proper, it will start OpenSBI. All necessary
parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot
proper is started in supervisor mode by OpenSBI. Support for OpenSBI is
enabled with CONFIG_SPL_OPENSBI. An additional configuration entry,
CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the
OpenSBI firmware binary. It is not used directly in U-Boot and instead
is intended to make the value available to scripts such as FIT
configuration generators.

The header file include/opensbi.h is based on header files from the
OpenSBI project. They are recent, as of commit bae54f764570 ("firmware:
Add fw_dynamic firmware").

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

1 files changed, 85 insertions, 0 deletions

diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
new file mode 100644
index 0000000000..a6b4480ed2
--- /dev/null
+++ b/common/spl/spl_opensbi.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Fraunhofer AISEC,
+ * Lukas Auer <lukas.auer@aisec.fraunhofer.de>
+ *
+ * Based on common/spl/spl_atf.c
+ */
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/smp.h>
+#include <opensbi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct fw_dynamic_info opensbi_info;
+
+static int spl_opensbi_find_uboot_node(void *blob, int *uboot_node)
+{
+	int fit_images_node, node;
+	const char *fit_os;
+
+	fit_images_node = fdt_path_offset(blob, "/fit-images");
+	if (fit_images_node < 0)
+		return -ENODEV;
+
+	fdt_for_each_subnode(node, blob, fit_images_node) {
+		fit_os = fdt_getprop(blob, node, FIT_OS_PROP, NULL);
+		if (!fit_os)
+			continue;
+
+		if (genimg_get_os_id(fit_os) == IH_OS_U_BOOT) {
+			*uboot_node = node;
+			return 0;
+		}
+	}
+
+	return -ENODEV;
+}
+
+void spl_invoke_opensbi(struct spl_image_info *spl_image)
+{
+	int ret, uboot_node;
+	ulong uboot_entry;
+	void (*opensbi_entry)(ulong hartid, ulong dtb, ulong info);
+
+	if (!spl_image->fdt_addr) {
+		pr_err("No device tree specified in SPL image\n");
+		hang();
+	}
+
+	/* Find U-Boot image in /fit-images */
+	ret = spl_opensbi_find_uboot_node(spl_image->fdt_addr, &uboot_node);
+	if (ret) {
+		pr_err("Can't find U-Boot node, %d", ret);
+		hang();
+	}
+
+	/* Get U-Boot entry point */
+	uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
+				      "entry-point");
+	if (uboot_entry == FDT_ERROR)
+		uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
+					      "load-addr");
+
+	/* Prepare obensbi_info object */
+	opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE;
+	opensbi_info.version = FW_DYNAMIC_INFO_VERSION;
+	opensbi_info.next_addr = uboot_entry;
+	opensbi_info.next_mode = FW_DYNAMIC_INFO_NEXT_MODE_S;
+	opensbi_info.options = SBI_SCRATCH_NO_BOOT_PRINTS;
+
+	opensbi_entry = (void (*)(ulong, ulong, ulong))spl_image->entry_point;
+	invalidate_icache_all();
+
+#ifdef CONFIG_SMP
+	ret = smp_call_function((ulong)spl_image->entry_point,
+				(ulong)spl_image->fdt_addr,
+				(ulong)&opensbi_info);
+	if (ret)
+		hang();
+#endif
+	opensbi_entry(gd->arch.boot_hart, (ulong)spl_image->fdt_addr,
+		      (ulong)&opensbi_info);
+}