Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 145 deletions

diff --git a/common/cmd_portio.c b/common/cmd_portio.c
deleted file mode 100644
index bf3a99791c..0000000000
--- a/common/cmd_portio.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2003
- * Marc Singer, elf@buici.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Port I/O Functions
- *
- * Copied from FADS ROM, Dan Malek (dmalek@jlc.net)
- */
-
-#include <common.h>
-#include <command.h>
-
-/* Display values from last command.
- * Memory modify remembered values are different from display memory.
- */
-static uint in_last_addr, in_last_size;
-static uint out_last_addr, out_last_size, out_last_value;
-
-
-int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	uint addr = out_last_addr;
-	uint size = out_last_size;
-	uint value = out_last_value;
-
-	if (argc != 3)
-		return CMD_RET_USAGE;
-
-	if ((flag & CMD_FLAG_REPEAT) == 0) {
-		/*
-		 * New command specified.  Check for a size specification.
-		 * Defaults to long if no or incorrect specification.
-		 */
-		size = cmd_get_data_size (argv[0], 1);
-		addr = simple_strtoul (argv[1], NULL, 16);
-		value = simple_strtoul (argv[2], NULL, 16);
-	}
-#if defined (CONFIG_X86)
-
-	{
-		unsigned short port = addr;
-
-		switch (size) {
-		default:
-		case 1:
-		    {
-			unsigned char ch = value;
-			__asm__ volatile ("out %0, %%dx"::"a" (ch), "d" (port));
-		    }
-			break;
-		case 2:
-		    {
-			unsigned short w = value;
-			__asm__ volatile ("out %0, %%dx"::"a" (w), "d" (port));
-		    }
-			break;
-		case 4:
-			__asm__ volatile ("out %0, %%dx"::"a" (value), "d" (port));
-
-			break;
-		}
-	}
-
-#endif							/* CONFIG_X86 */
-
-	out_last_addr = addr;
-	out_last_size = size;
-	out_last_value = value;
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	out,	3,	1,	do_portio_out,
-	"write datum to IO port",
-	"[.b, .w, .l] port value\n    - output to IO port"
-);
-
-int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	uint addr = in_last_addr;
-	uint size = in_last_size;
-
-	if (argc != 2)
-		return CMD_RET_USAGE;
-
-	if ((flag & CMD_FLAG_REPEAT) == 0) {
-		/*
-		 * New command specified.  Check for a size specification.
-		 * Defaults to long if no or incorrect specification.
-		 */
-		size = cmd_get_data_size (argv[0], 1);
-		addr = simple_strtoul (argv[1], NULL, 16);
-	}
-#if defined (CONFIG_X86)
-
-	{
-		unsigned short port = addr;
-
-		switch (size) {
-		default:
-		case 1:
-		    {
-			unsigned char ch;
-			__asm__ volatile ("in %%dx, %0":"=a" (ch):"d" (port));
-
-			printf (" %02x\n", ch);
-		    }
-			break;
-		case 2:
-		    {
-			unsigned short w;
-			__asm__ volatile ("in %%dx, %0":"=a" (w):"d" (port));
-
-			printf (" %04x\n", w);
-		    }
-			break;
-		case 4:
-		    {
-			unsigned long l;
-			__asm__ volatile ("in %%dx, %0":"=a" (l):"d" (port));
-
-			printf (" %08lx\n", l);
-		    }
-			break;
-		}
-	}
-#endif	/* CONFIG_X86 */
-
-	in_last_addr = addr;
-	in_last_size = size;
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	in,	2,	1,	do_portio_in,
-	"read data from an IO port",
-	"[.b, .w, .l] port\n"
-	"    - read datum from IO port"
-);