Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 41 insertions, 0 deletions

diff --git a/cmd/cmd_softswitch.c b/cmd/cmd_softswitch.c
new file mode 100644
index 0000000000..f75d926770
--- /dev/null
+++ b/cmd/cmd_softswitch.c
@@ -0,0 +1,41 @@
+/*
+ * cmd_softswitch.c - set the softswitch for bf60x
+ *
+ * Copyright (c) 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm/soft_switch.h>
+
+int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int switchaddr, value, pin, port;
+
+	if (argc != 5)
+		return CMD_RET_USAGE;
+
+	if (strcmp(argv[2], "GPA") == 0)
+		port = IO_PORT_A;
+	else if (strcmp(argv[2], "GPB") == 0)
+		port = IO_PORT_B;
+	else
+		return CMD_RET_USAGE;
+
+	switchaddr = simple_strtoul(argv[1], NULL, 16);
+	pin = simple_strtoul(argv[3], NULL, 16);
+	value = simple_strtoul(argv[4], NULL, 16);
+
+	config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	softswitch_output, 5, 1, do_softswitch,
+	"switchaddr GPA/GPB pin_offset value",
+	""
+);