diff options
| author | Suniel Mahesh <sunil@amarulasolutions.com> | 2020-04-02 18:22:30 +0530 |
|---|---|---|
| committer | Kever Yang <kever.yang@rock-chips.com> | 2020-04-29 10:30:55 +0800 |
| commit | 79011f358f6aab88cc8334d26d11b0ceddc176e9 (patch) | |
| tree | fa363e54b350f7513be9a1120de9fec83f46be4f /board | |
| parent | d768a064a4368a458fe8320e0a45d198acd4475e (diff) | |
| download | u-boot-79011f358f6aab88cc8334d26d11b0ceddc176e9.tar.gz | |
rockchip: board: roc-pc-rk3399: Remove support for push button
In case of a power interruption, human intervention is required which
is not desirable if the device is installed at a remote location. Drop
yellow LED as it is not much of use. Keep red LED(diy-led) as it is, to
indicate board in full power mode.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 16 |
1 files changed, 1 insertions, 15 deletions
diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c index de9185a7ce..0fe1914c0f 100644 --- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c +++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c @@ -10,7 +10,6 @@ #include <spl_gpio.h> #include <asm/io.h> #include <asm/arch-rockchip/gpio.h> -#include <asm/arch-rockchip/grf_rk3399.h> #ifndef CONFIG_SPL_BUILD int board_early_init_f(void) @@ -34,26 +33,13 @@ out: #if defined(CONFIG_TPL_BUILD) -#define PMUGRF_BASE 0xff320000 #define GPIO0_BASE 0xff720000 int board_early_init_f(void) { struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE; - struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE; - /** - * 1. Glow yellow LED, termed as low power - * 2. Poll for on board power key press - * 3. Once 2 done, off yellow and glow red LED, termed as full power - * 4. Continue booting... - */ - spl_gpio_output(gpio0, GPIO(BANK_A, 2), 1); - - spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_A, 5), GPIO_PULL_NORMAL); - while (readl(&gpio0->ext_port) & 0x20); - - spl_gpio_output(gpio0, GPIO(BANK_A, 2), 0); + /* Turn on red LED, indicating full power mode */ spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1); return 0; |