arm: mvebu: theadorable: Add 'pcie' test command

This board specific command tests for the presence of a specified PCIe
device (via vendor-ID and device-ID). If the device is not detected,
this will get printed. If the device is detected, the board will get
resetted so that an easy loop test can be done. The board will reboot
until the PCIe device is not detected.

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 41 insertions, 0 deletions

diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c
index d4242170c7..9b56620e65 100644
--- a/board/theadorable/theadorable.c
+++ b/board/theadorable/theadorable.c
@@ -294,3 +294,44 @@ int board_late_init(void)
 	return 0;
 }
 #endif
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_PCI)
+int do_pcie_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	pci_dev_t bdf;
+	u16 ven_id, dev_id;
+
+	if (argc != 3)
+		return cmd_usage(cmdtp);
+
+	ven_id = simple_strtoul(argv[1], NULL, 16);
+	dev_id = simple_strtoul(argv[2], NULL, 16);
+
+	printf("Checking for PCIe device: VendorID 0x%04x, DeviceId 0x%04x\n",
+	       ven_id, dev_id);
+
+	/*
+	 * Check if the PCIe device is detected (somtimes its not available
+	 * on the PCIe bus)
+	 */
+	bdf = pci_find_device(ven_id, dev_id, 0);
+	if (bdf == -1) {
+		/* PCIe device not found! */
+		printf("Failed to find PCIe device\n");
+	} else {
+		/* PCIe device found! */
+		printf("PCIe device found, resetting board...\n");
+
+		/* default handling: SOFT reset */
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	pcie,   3,   0,     do_pcie_test,
+	"Test for presence of a PCIe device",
+	"<VendorID> <DeviceID>"
+);
+#endif