diff options
| author | Tom Rini <trini@konsulko.com> | 2020-07-29 16:30:45 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-07-29 16:30:45 -0400 |
| commit | 7cb2060b4e63a89c50739dc8a9fcd5d73f86f0be (patch) | |
| tree | 984ba6e187e131d890354557925698ee614fdb7e /board/st/stm32mp1/stm32mp1.c | |
| parent | 8da75b1ddf966bd8457a2b5bf59dec0bfc9a1cd6 (diff) | |
| parent | 0b263a905a02bd3ae7516149490a98462d966f55 (diff) | |
| download | u-boot-7cb2060b4e63a89c50739dc8a9fcd5d73f86f0be.tar.gz | |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- fix SPL boot issue due to early dbgmcu_init() call
- fix SPL boot issue due to dcache memory region configuration
- add support of CONFIG_ENV_IS_IN_MMC
- add specific SD/eMMC partition for U-Boot enviromnent
- enable env in SPL
- use "env info -q" to remove log during boot
- remove env location override for dh_stm32mp1
- update management of misc_read
- check result of find_mmc_device in stm32prog
- use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc
- enable CMD_ADTIMG flag to handle Android images
- device tree alignment with Linux Kernel v5.8-rc1
- remove hnp-srp-disable for usbotg on dk1
- add reset support to uart nodes on stm32mp15x
- use correct weak function name spl_board_prepare_for_linux
- use cd-gpios for ST and DHSOM boards
- add seeed studio odyssey-stm32mp157c board support
- move ethernet PHY into SoM DT
- add DHSOM based DRC02 board support
Diffstat (limited to 'board/st/stm32mp1/stm32mp1.c')
| -rw-r--r-- | board/st/stm32mp1/stm32mp1.c | 22 |
1 files changed, 18 insertions, 4 deletions
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 57a649e97e..1d274c3157 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -686,7 +686,7 @@ int board_late_init(void) if (!ret) ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_BOARD), &otp, sizeof(otp)); - if (!ret && otp) { + if (ret > 0 && otp) { snprintf(buf, sizeof(buf), "0x%04x", otp >> 16); env_set("board_id", buf); @@ -787,17 +787,22 @@ enum env_location env_get_location(enum env_operation op, int prio) return ENVL_UNKNOWN; switch (bootmode & TAMP_BOOT_DEVICE_MASK) { -#ifdef CONFIG_ENV_IS_IN_EXT4 +#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC) + case BOOT_FLASH_SD: + case BOOT_FLASH_EMMC: + return ENVL_MMC; +#endif +#if CONFIG_IS_ENABLED(ENV_IS_IN_EXT4) case BOOT_FLASH_SD: case BOOT_FLASH_EMMC: return ENVL_EXT4; #endif -#ifdef CONFIG_ENV_IS_IN_UBI +#if CONFIG_IS_ENABLED(ENV_IS_IN_UBI) case BOOT_FLASH_NAND: case BOOT_FLASH_SPINAND: return ENVL_UBI; #endif -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH +#if CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH) case BOOT_FLASH_NOR: return ENVL_SPI_FLASH; #endif @@ -829,6 +834,15 @@ const char *env_ext4_get_dev_part(void) } #endif +#if defined(CONFIG_ENV_IS_IN_MMC) +int mmc_get_env_dev(void) +{ + u32 bootmode = get_bootmode(); + + return (bootmode & TAMP_BOOT_INSTANCE_MASK) - 1; +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { |