board/spear/common: move code to arch/arm/cpu/arm926ejs/spear/

The code in board/spear/common/ is not board-specific but
SoC-specific. Therefore, boards from other vendors than "spear" may
want to re-use this code, which is currently difficult with the code
being placed in board/spear/common/.

Since this code really is SoC-specific, this commit moves it to
arch/arm/cpu/arm926ejs/spear/, with the rest of the SPEAr related
code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

1 files changed, 0 insertions, 249 deletions

diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
deleted file mode 100644
index a02304f49e..0000000000
--- a/board/spear/common/spr_misc.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <net.h>
-#include <linux/mtd/st_smi.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_emi.h>
-#include <asm/arch/spr_defs.h>
-
-#define CPU		0
-#define DDR		1
-#define SRAM_REL	0xD2801000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET)
-static int i2c_read_mac(uchar *buffer);
-#endif
-
-int dram_init(void)
-{
-	/* Store complete RAM size and return */
-	gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
-
-	return 0;
-}
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-
-	return 0;
-}
-
-int board_early_init_f()
-{
-#if defined(CONFIG_ST_SMI)
-	smi_init();
-#endif
-	return 0;
-}
-int misc_init_r(void)
-{
-#if defined(CONFIG_CMD_NET)
-	uchar mac_id[6];
-
-	if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
-		eth_env_set_enetaddr("ethaddr", mac_id);
-#endif
-	env_set("verify", "n");
-
-#if defined(CONFIG_SPEAR_USBTTY)
-	env_set("stdin", "usbtty");
-	env_set("stdout", "usbtty");
-	env_set("stderr", "usbtty");
-
-#ifndef CONFIG_SYS_NO_DCACHE
-	dcache_enable();
-#endif
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_SPEAR_EMI
-struct cust_emi_para {
-	unsigned int tap;
-	unsigned int tsdp;
-	unsigned int tdpw;
-	unsigned int tdpr;
-	unsigned int tdcs;
-};
-
-/* EMI timing setting of m28w640hc of linux kernel */
-const struct cust_emi_para emi_timing_m28w640hc = {
-	.tap = 0x10,
-	.tsdp = 0x05,
-	.tdpw = 0x0a,
-	.tdpr = 0x0a,
-	.tdcs = 0x05,
-};
-
-/* EMI timing setting of bootrom */
-const struct cust_emi_para emi_timing_bootrom = {
-	.tap = 0xf,
-	.tsdp = 0x0,
-	.tdpw = 0xff,
-	.tdpr = 0x111,
-	.tdcs = 0x02,
-};
-
-void spear_emi_init(void)
-{
-	const struct cust_emi_para *p = &emi_timing_m28w640hc;
-	struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
-	unsigned int cs;
-	unsigned int val, tmp;
-
-	val = readl(CONFIG_SPEAR_RASBASE);
-
-	if (val & EMI_ACKMSK)
-		tmp = 0x3f;
-	else
-		tmp = 0x0;
-
-	writel(tmp, &emi_regs_p->ack);
-
-	for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
-		writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
-		writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
-		writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
-		writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
-		writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
-		writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
-		       &emi_regs_p->bank_regs[cs].control);
-	}
-}
-#endif
-
-int spear_board_init(ulong mach_type)
-{
-	gd->bd->bi_arch_number = mach_type;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
-
-#ifdef CONFIG_SPEAR_EMI
-	spear_emi_init();
-#endif
-	return 0;
-}
-
-#if defined(CONFIG_CMD_NET)
-static int i2c_read_mac(uchar *buffer)
-{
-	u8 buf[2];
-
-	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
-
-	/* Check if mac in i2c memory is valid */
-	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
-		/* Valid mac address is saved in i2c eeprom */
-		i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
-		return 0;
-	}
-
-	return -1;
-}
-
-static int write_mac(uchar *mac)
-{
-	u8 buf[2];
-
-	buf[0] = (u8)MAGIC_BYTE0;
-	buf[1] = (u8)MAGIC_BYTE1;
-	i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
-
-	buf[0] = (u8)~MAGIC_BYTE0;
-	buf[1] = (u8)~MAGIC_BYTE1;
-
-	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
-
-	/* check if valid MAC address is saved in I2C EEPROM or not? */
-	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
-		i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
-		puts("I2C EEPROM written with mac address \n");
-		return 0;
-	}
-
-	puts("I2C EEPROM writing failed\n");
-	return -1;
-}
-#endif
-
-int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	void (*sram_setfreq) (unsigned int, unsigned int);
-	unsigned int frequency;
-#if defined(CONFIG_CMD_NET)
-	unsigned char mac[6];
-#endif
-
-	if ((argc > 3) || (argc < 2))
-		return cmd_usage(cmdtp);
-
-	if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
-
-		frequency = simple_strtoul(argv[2], NULL, 0);
-
-		if (frequency > 333) {
-			printf("Frequency is limited to 333MHz\n");
-			return 1;
-		}
-
-		sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
-
-		if (!strcmp(argv[1], "cpufreq")) {
-			sram_setfreq(CPU, frequency);
-			printf("CPU frequency changed to %u\n", frequency);
-		} else {
-			sram_setfreq(DDR, frequency);
-			printf("DDR frequency changed to %u\n", frequency);
-		}
-
-		return 0;
-
-#if defined(CONFIG_CMD_NET)
-	} else if (!strcmp(argv[1], "ethaddr")) {
-
-		u32 reg;
-		char *e, *s = argv[2];
-		for (reg = 0; reg < 6; ++reg) {
-			mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
-			if (s)
-				s = (*e) ? e + 1 : e;
-		}
-		write_mac(mac);
-
-		return 0;
-#endif
-	} else if (!strcmp(argv[1], "print")) {
-#if defined(CONFIG_CMD_NET)
-		if (!i2c_read_mac(mac)) {
-			printf("Ethaddr (from i2c mem) = %pM\n", mac);
-		} else {
-			printf("Ethaddr (from i2c mem) = Not set\n");
-		}
-#endif
-		return 0;
-	}
-
-	return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
-	   "configure chip",
-	   "chip_config cpufreq/ddrfreq frequency\n"
-#if defined(CONFIG_CMD_NET)
-	   "chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
-#endif
-	   "chip_config print");