dm: i2c: tegra: Convert to driver model

This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

   - CONFIG_SYS_I2C_INIT_BOARD
   - CONFIG_I2C_MULTI_BUS
   - CONFIG_SYS_MAX_I2C_BUS
   - CONFIG_SYS_I2C_SPEED
   - CONFIG_SYS_I2C

This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1

It has not been tested on Tegra 114 as I don't have that board.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 18 insertions, 11 deletions

diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 3e9d3d9f10..3114b20be0 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch/clock.h>
@@ -21,23 +22,26 @@
  */
 void pin_mux_mmc(void)
 {
+	struct udevice *dev;
 	uchar val;
 	int ret;
 
 	/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
-	ret = i2c_set_bus_num(0);
-	if (ret)
-		printf("i2c_set_bus_num failed: %d\n", ret);
+	ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
+	if (ret) {
+		printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
+		return;
+	}
 	val = 0x29;
-	ret = i2c_write(0x3c, 0x46, 1, &val, 1);
+	ret = i2c_write(dev, 0x46, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
 	val = 0x00;
-	ret = i2c_write(0x3c, 0x45, 1, &val, 1);
+	ret = i2c_write(dev, 0x45, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
 	val = 0x1f;
-	ret = i2c_write(0x3c, 0x44, 1, &val, 1);
+	ret = i2c_write(dev, 0x44, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
 
@@ -49,6 +53,7 @@ void pin_mux_mmc(void)
 /* this is a weak define that we are overriding */
 void pin_mux_usb(void)
 {
+	struct udevice *dev;
 	uchar val;
 	int ret;
 
@@ -59,15 +64,17 @@ void pin_mux_usb(void)
 	 */
 
 	/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
-	ret = i2c_set_bus_num(0);
-	if (ret)
-		printf("i2c_set_bus_num failed: %d\n", ret);
+	ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
+	if (ret) {
+		printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
+		return;
+	}
 	val = 0x03;
-	ret = i2c_write(0x20, 2, 1, &val, 1);
+	ret = i2c_write(dev, 2, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x20 2 failed: %d\n", ret);
 	val = 0xfc;
-	ret = i2c_write(0x20, 6, 1, &val, 1);
+	ret = i2c_write(dev, 6, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x20 6 failed: %d\n", ret);
 }